5 Advanced MAs MTF🔵 OVERVIEW
5 Advanced MAs MTF is a professional moving averages indicator designed for traders who need to see multiple trend layers on a single chart simultaneously, each one with its own independent configuration and — above all — its own timeframe.
Unlike typical "ribbon" or "multi-MA" indicators on the market, which display several averages all computed on the active chart's timeframe, this indicator allows each of the 5 averages to have its own timeframe. You can have your EMA 8 on the 15-minute chart, your EMA 20 on the 1-hour, your EMA 50 on the 4-hour, and your SMA 200 on the daily, all plotted on the same 15-minute chart. That turns the indicator into a complete multi-timeframe control panel without needing to open four separate charts or saturate your installed indicators list.
🔶 KEY FEATURES
• 5 fully independent moving averages — each one configured separately and enabled or disabled individually.
• True multi-timeframe per MA — the core differentiator. Each MA can read its value from a higher, lower, or equal timeframe relative to the active chart. Leave it empty to use the chart's current timeframe.
• 9 moving average types — SMA, EMA, WMA, RMA, HMA, VWMA, TEMA, KAMA, and JMA. The last three (TEMA, KAMA, JMA) are implemented with their original formulas, no shortcuts. JMA uses Mark Jurik's standard defaults (Phase = 50, Power = 2).
• Configurable source per MA — Close, Open, High, Low, hl2, hlc3, ohlc4.
• Full visual styling per MA — color, width (1 to 10), and line style (solid, dashed, or dotted).
• Smart labels — each MA can show its label directly on the line, with configurable content (type, length, timeframe, or any combination of the three). Adjustable horizontal bar offset and text size.
• Interactive summary table — placed at any of the 9 chart anchors, displaying color column, type, length, timeframe, and price distance from each MA (in percentage and absolute value). Toggle to include or exclude hidden MAs.
• 22-alert system — 10 for Price↔MA crosses (bullish and bearish for each MA), 10 for MA↔MA crosses across 5 configurable slots (you pick which MA pairs to monitor), and 2 wildcard "any cross detected" alerts. All compatible with webhooks and automation.
• Works on any market and any timeframe — equities, futures, crypto, forex, commodities. From tick charts to monthly charts.
🔹 USE CASES BY TRADER STYLE
▪️ Day trader / scalper
Configure the first 3 MAs as short EMAs (8, 20, 50) on the chart's timeframe (5m or 15m) and leave MAs 4 and 5 as SMA 200 and VWMA 100 but reading them from a higher timeframe (1H, 4H, or daily). Result: you see your fast entry signals and the higher-timeframe bias at the same time without switching charts.
▪️ Swing trader
Recommended setup: EMA 20 and EMA 50 on the active chart (1H or 4H) + SMA 200 read from daily + VWMA 100 read from weekly. This lets you watch pullbacks against the EMA 20 on your operative timeframe with immediate confirmation that the higher-timeframe bias is aligned, plus the weekly VWMA as a volume-weighted "fair price" reference.
▪️ Position trader / long-term
Enable all 5 MAs on daily or weekly to build a complete structural map of the asset. The default configuration (EMA 8, EMA 20, EMA 50, SMA 200, and VWMA 100, all on daily) covers everything from fast momentum to the institutional level, combining pure-price references (SMA 200) with volume-weighted references (VWMA 100). The summary table shows the exact distance of price from each one.
▪️ Systematic crossover trader
The MA↔MA alert slots let you configure up to 5 specific crossovers simultaneously. Classic Golden Cross / Death Cross setup: Slot 1 with MA 3 (EMA 50) crossing MA 4 (SMA 200) on daily, with an automatic alert sent to your bot's webhook or notification system.
▪️ Multi-timeframe confluence trader
The most differentiating use case. Assign each MA to a different timeframe: MA 1 on 5m, MA 2 on 15m, MA 3 on 1H, MA 4 on 4H, MA 5 on daily or weekly. The summary table shows you in real time the distance of current price from the key level of each of those timeframes. When several MAs from different timeframes converge on the same price zone, that zone becomes a high-density structural level — one of the most-used concepts among institutional traders.
⚙️ INPUTS & CUSTOMIZATION
The entire indicator is 100% configurable from the Inputs panel. Each MA has its own expandable group with 14 controls. The summary table is also fully customizable (position, text size, background/border/text colors). The JMA global parameters (Phase and Power) live in their own section so advanced users can adjust them without cluttering the individual groups.
By default, all 5 MAs are enabled with a configuration tailored for daily and swing use: EMA 8 (blue, 1D), EMA 20 (red, 1D), EMA 50 (yellow, 1D), SMA 200 (green dashed, 1D), and VWMA 100 (pink dotted, 1D). The user can modify any of the parameters or reassign the MAs to other timeframes at any moment.
🔔 ALERTS
The indicator ships with 22 precompiled alerts ready to use:
• 5 alerts "Price crosses above MA N"
• 5 alerts "Price crosses below MA N"
• 10 alerts across 5 configurable slots for MA↔MA crossovers (bullish and bearish per slot)
• 2 wildcard alerts "any cross detected"
All messages include the {{ticker}} and {{close}} placeholders so they are directly parseable by webhooks, bots, and automation systems.
❓ FAQ
Does the indicator repaint?
No. The moving averages are computed on confirmed historical data. Cross alerts fire on the bar of the cross and values are not modified retroactively. To avoid signals that appear and disappear intra-bar, set the alerts to "Once per bar close".
Does it work on any timeframe?
Yes. From tick charts to monthly. In addition, each MA can have its own higher, lower, or equal timeframe relative to the active chart. The default timeframe is the current chart's timeframe.
Why 9 MA types?
Because each type behaves differently. SMA is the pure average; EMA weights recent bars more; HMA virtually eliminates lag; KAMA adapts to volatility; JMA is the smoothest while staying responsive; VWMA weights by volume. Having all of them available lets you use the right tool for each analysis without installing several separate indicators.
What are the 5 MA↔MA alert slots for?
They let you configure specific crossovers between any pair of MAs without having to create all possible combinations. In each slot you pick the fast MA and slow MA from dropdowns and receive alerts for the bullish and bearish crossovers of that pair. Example: Slot 1 = MA 3 crosses MA 4 (classic Golden Cross / Death Cross when MA 3 = EMA 50 and MA 4 = SMA 200).
What is the best MA combination?
There is no single "best" — it depends on the trading style and the asset. The Use Cases section above includes recommended configurations for the 5 most common profiles.
Is it compatible with webhooks and automation?
Yes. The 22 alerts use {{ticker}} and {{close}} placeholders in their messages, making them directly compatible with PulseWire Webhooks, copy-trading platforms, Telegram/Discord bots, and any system that parses JSON.
Is it free to use?
Yes. Open-source indicator under the Mozilla Public License 2.0. You can review the full code, use it freely on PulseWire, and create derivative copies while respecting the license terms.
⚠️ DISCLAIMER
This indicator is a technical analysis tool provided solely for educational and informational purposes. It does not constitute financial advice, an investment recommendation, or an invitation to trade any instrument. Moving averages are reactive (not predictive) indicators: they are based on historical data and, by their nature, can produce delayed signals in markets with sharp trend changes. In ranging or low-volatility market contexts, crossovers can be frequent and not particularly informative. Every trading decision is the sole responsibility of the trader. Past performance does not guarantee future results.
© 2026 Lic. Farias Foresi, Leandro M. — License: Mozilla Public License 2.0
Indicator
Conflux Engine | AnonycryptousConflux Engine | Anonycryptous
Description & user manual
Why this indicator is different?
Most signal indicators work the same way. One condition triggers. One signal fires. The trader either takes it or does not.
The problem is that a single condition — a crossover, a level break, a momentum read — is almost never enough to define a genuinely high-quality trade. Markets are too complex and too noisy for that.
Conflux Engine works differently.
It does not fire on one condition. It requires multiple independent market forces to align simultaneously before a signal appears. Structure has to agree. Volume has to confirm. Momentum has to support. Volatility has to be in the right zone. Session positioning has to be favorable. And optionally, the higher timeframe trend and the ribbon have to be aligned too.
Only when enough of these forces agree — and agree clearly — does the indicator produce a signal.
This is what confluence means in practice. Not one thing being right. Multiple independent things being right at the same time.
The result is fewer signals. But the signals that do appear carry more weight than anything a single-condition system can produce.
Important notice
Conflux Engine generates trading signals based on a multi-factor scoring engine.
These signals are not financial advice.
They do not predict the future.
They do not guarantee profitability.
They are a systematic read of current market conditions across multiple dimensions.
All trading decisions are made entirely by the user.
Always manage your own risk. Always apply your own judgment.
1. Overview
Conflux Engine is a scoring-based signal indicator for traders who want structured, high-conviction entries rather than frequent, noisy ones.
Six independent pillars evaluate the market continuously. Each pillar scores independently. The scores combine into a total out of 100. When the total exceeds the signal threshold — and the dominant direction leads the opposite direction by a minimum gap — a signal fires.
Additional hard gates can be enabled: an ADX noise filter to block signals during choppy markets, a VWMA filter to ensure macro trend alignment, a Supertrend filter for dynamic trend confirmation, and an Ultra Ribbon filter using 15 Hull Moving Averages for the fastest momentum read.
The result is an indicator that is selective by design. It is not built to fire constantly. It is built to fire well.
2. The six pillars
2.1 Structure
Evaluates market structure using swing pivot highs and lows. A higher high combined with a higher low defines a bullish structure. A lower high combined with a lower low defines a bearish structure.
This pillar answers the most fundamental question in trading: is the market making progress in a direction, or is it deteriorating?
Weight: up to 16 points.
2.2 Volume
Uses OBV slope via linear regression to determine whether volume is accumulating in the direction of price or diverging from it.
Rising OBV slope on a bullish signal means participation supports the move. Falling OBV slope on a bullish signal is a warning. This pillar separates moves with institutional backing from moves without it.
Weight: up to 16 points.
2.3 Momentum
Evaluates three independent momentum reads: KAMA position (a Kaufman adaptive moving average that adjusts its speed to market conditions), RSI relative to the 50 midline with slope direction, and Williams %R for price positioning within the recent range.
Two of three aligned scores partial points. All three aligned scores full points.
Weight: up to 16 points.
2.4 Liquidity
Detects sweep events — moments where price wicks beyond a recent swing high or low and closes back inside. These events mark liquidity grabs and often precede directional moves.
A confirmed bull sweep sets up a long bias context. A confirmed bear sweep sets up a short bias context. The context remains active for a configurable number of bars, decaying over time.
Weight: up to 16 points.
2.5 Volatility
Measures ATR relative to its own moving average to identify the volatility sweet spot. Signals during dead, flat markets carry less meaning. Signals during chaotically explosive moves are harder to execute cleanly. This pillar rewards the in-between: active, directional, manageable volatility.
Weight: up to 16 points.
2.6 Session
Evaluates price positioning within the current day's developing range. Price in the lower portion of the range (discount) favors long bias. Price in the upper portion (premium) favors short bias.
This pillar can be toggled independently from the session time filter — you can use session scoring without restricting signals to specific hours, or vice versa.
Weight: up to 20 points.
3. Hard gates
Beyond the six scoring pillars, Conflux Engine includes four optional hard gates. These do not add points. They block signals entirely when their condition is not met.
3.1 ADX noise filter
Blocks signals when ADX is below a configurable threshold. ADX measures trend strength. A low ADX means the market is ranging and directionless — exactly the environment where momentum signals fail most often. Default threshold: 35. Adjustable up to 100 for maximum selectivity.
3.2 VWMA filter
Price must be above the Volume Weighted Moving Average for long signals, and below it for short signals. The VWMA is slower than a standard EMA and reflects the average price weighted by volume — a more meaningful macro reference than a simple average. Default length: 200.
3.3 Supertrend filter
The Supertrend must confirm the signal direction. This is a dynamic trend line based on ATR bands that flips cleanly between bull and bear states. It acts as an additional structural confirmation that the trend environment supports the entry.
3.4 Ultra Ribbon filter
The fastest gate. Built from 15 Hull Moving Averages spanning a range of lengths. When the fastest HMA is above the slowest HMA, the ribbon is bullish. When below, bearish. Because Hull MAs minimize lag, this gate reacts to trend changes earlier than most moving average systems.
The ribbon also serves as a trailing stop option in the backtest — the slowest HMA tracks trend without being too reactive.
4. Signal scoring
Every bar, both a bullish and bearish score are computed from the six pillars. The scores are added together.
A signal fires when:
- The dominant score meets or exceeds the signal threshold (default 70)
- The dominant score exceeds the opposite score by at least the directional lead (default 20)
- All enabled hard gates are cleared
This two-condition check — threshold plus gap — prevents marginal signals from appearing when the market is ambiguous. Both bull and bear can score reasonably high during mixed conditions. The gap requirement ensures the dominant direction is meaningfully ahead.
Pillar weights are individually adjustable. The system allows traders to prioritize the factors most relevant to their trading style and instrument.
The Extreme Threshold (default 90) flags signals where the confluence score is exceptionally high. These are the highest-conviction setups in the system.
5. The Ultra Ribbon
The Ultra Ribbon is a 15-layer Hull Moving Average ribbon that sits on the chart as both a visual trend tool and a momentum gate. Three themes are available:
Classic — green and red. Clear, functional, no ambiguity.
Phantom — cyan and pink with purple exhaustion. A darker, stylized read of the same data. (the default)
Custom — full color control for bull, bear, and exhaustion states.
The ribbon color adapts dynamically. When the spread between the fastest and slowest HMA is wide relative to its historical average, the ribbon fades toward the exhaustion color — a visual signal that the trend may be overextended. When the spread is moderate, the ribbon shows its full trend color.
Candle coloring follows the ribbon's bull/bear state continuously, giving an immediate read of trend direction on every bar.
The dashboard accent color and signal indicators follow the active theme, giving the entire indicator a unified visual identity across chart and panel.
6. Multi-timeframe filter
When enabled, the MTF filter evaluates the trend on a higher timeframe using a 50-period EMA. If the higher timeframe trend agrees with the signal direction, a weight bonus is added to the total score. If it disagrees, no bonus is added — but the signal is not blocked unless the score falls below threshold as a result.
This behavior is intentional. The HTF filter adds weight to aligned signals without making every counter-trend setup impossible. It rewards confluence with the bigger picture without enforcing hard alignment.
Default timeframe: 240 (4-hour).
Default weight bonus: 20 points.
7. Backtest and performance tracking
Confluence Engine includes a built-in performance tracker that logs every signal, applies configurable stop and target multipliers based on the current regime, and tracks wins, losses, and win rate across the visible history.
Stop loss modes:
- ATR — a fixed multiple of ATR from the entry price. Simple and consistent.
- Pivot — stop placed at the most recent swing low (for longs) or swing high (for shorts). Respects structure.
- Supertrend — stop placed at the dynamic Supertrend level at the time of entry. Tighter and adaptive.
- Trailing (h15) — stop follows the slowest HMA of the Ultra Ribbon. Trends with the market and gives winners more room.
Target multipliers are adjustable for each regime: Scalp, Intraday, and Swing. The regime is determined by the current ADX value.
Recent log shows the last three trade results in R multiples. This gives a quick read on recent system performance without requiring a separate journaling tool.
Note: the backtest uses bar close logic and approximated fill prices. It is a directional performance reference, not a precise simulation. Session filtering does not retroactively apply to historical trades — enabling session filtering after a test period will affect forward signals but not past performance data.
8. Dashboard reference
The dashboard updates on every bar and shows:
- Header: indicator name and current timeframe
- Pillar rows 1–6: score per pillar, colored by direction
- HTF Trend: higher timeframe alignment and weight (when MTF enabled)
- Signal: LONG / SHORT / WAIT with direction color
- Win Rate: percentage of tracked signals that hit target
- Recent Log: last three results in R multiples
- Score: total confluence score out of 100
- Session: OPEN or FILTERED
The dashboard header and accent colors follow the active ribbon theme.
Tiny, Small, and Normal size options are available.
9. Settings reference
General Settings
- Signal Threshold: minimum score to trigger a signal (50–95, default 70)
- Extreme Threshold: score above which extreme confluence is flagged (80–100, default 90)
- Directional Lead: minimum gap between bull and bear score (default 20)
Multi-Timeframe Trend
- Enable MTF Filter
- HTF Timeframe (default 240)
- HTF Weight (default 20)
Quality Filters (Noise Reduction)
- Enable ADX Noise Filter
- Min ADX Value (0–100, default 35)
Trend Confirmation
- Enable VWMA Filter + length
- Enable Supertrend Filter + ATR length + multiplier
- Show/hide Supertrend and VWMA lines
Pillar Weights
- Individual weight for each of the six pillars
Session Filtering
- Filter Entries by Session (time gate)
- Enable Session Pillar Scoring (premium/discount scoring)
- Trading Session input
Trade Suggestions (ATR Multipliers)
- SL and TP multipliers for Scalp, Intraday, and Swing regimes
Ultra Ribbon
- Enable Ribbon Filter
- Show Ribbon on Chart
- Base Length and Length Step
- Theme: Classic / Phantom / Custom
- Custom color inputs (bull, bear, elite)
Backtest & UI
- Enable Performance Tracking
- Start Year
- Show Active Trade Lines
- Show Recent Trade Log
- Stop Loss Mode: ATR / Pivot / Supertrend / Trailing (h15)
UI Settings
- Show Dashboard
- Dashboard Position
- Dashboard Size: Tiny / Small / Normal
10. How to use
10.1 Initial setup
1. Load the indicator on your preferred chart and timeframe.
2. Select a ribbon theme that matches your visual preference.
3. Set the signal threshold based on your desired selectivity. Start at 70.
4. Set the directional lead. 15–20 is a balanced starting point.
5. Enable the hard gates relevant to your style. For intraday trading, ADX + Supertrend is a strong combination. For swing trading, VWMA + MTF adds macro context.
6. Configure the session scoring if you trade specific sessions. NY traders: set session to 1330–2000 UTC (or your local equivalent).
7. Set your backtest start year and stop mode preference.
10.2 Reading a signal
When a signal appears:
- Check the dashboard. Which pillars are active? A signal with Structure + Volume + Momentum all scoring is stronger than one carried primarily by Session and Volatility.
- Check the score. A signal at 72 with a 20-point gap is valid but tight. A signal at 88 with a 30-point gap is a high-conviction setup.
- Check the ribbon. Is it cleanly bullish or bearish? Is it near exhaustion color? Signals during ribbon exhaustion carry more risk.
- Check the hard gates. They cleared — but were they close? A signal that barely cleared ADX 35 is different from one with ADX at 55.
10.3 Managing entries
Confluence Engine does not tell you the exact entry price. It tells you when conditions align. Your entry technique — pullback, breakout, limit at structure — remains your decision.
Use the stop mode that fits your trade: ATR for consistency, Pivot for structure-respect, Supertrend for dynamic adaptation, Trailing h15 for trend trades you want to hold.
10.4 Interpreting win rate
The built-in win rate is a useful reference, not a guarantee of future performance. A 65% win rate over 50 signals on a specific asset and timeframe tells you the system has been profitable in that environment. It does not guarantee the next signal wins.
Win rate should always be evaluated alongside average RR. A 60% win rate at 2R average beats a 70% win rate at 0.8R average. Use the recent log and the trade lines together to assess both dimensions.
10.5 Optimizing settings
If you see too many signals: raise the threshold, raise the directional lead, raise the ADX minimum, or enable additional hard gates.
If you see too few signals: lower the threshold slightly, reduce the directional lead, or disable one or two hard gates.
Do not optimize purely for win rate without considering signal frequency. A system that fires once per week at 80% win rate is different in practice from one that fires daily at 65%. Both can be profitable. Choose what fits your trading style.
11. Timeframe guide
1m–5m — Ultra Ribbon filter on, ADX threshold 30–40, Supertrend on, session scoring on. Focus on fast momentum signals during active sessions.
15m–30m — Full filter stack recommended. Threshold 70–75. Strong balance of frequency and quality.
1H–4H — VWMA and MTF filter add significant value. Threshold 75–80. Fewer signals, higher conviction.
Daily — Disable session scoring. Enable VWMA and MTF only. Use as swing context, not scalp tool.
12. What this indicator does not do
- Does not predict price direction with certainty
- Does not guarantee profitability
- Does not replace your own risk management
- Does not account for news events, gaps, or liquidity voids
- Does not track open positions in real time
- Does not connect to any broker or execution system
- Does not replace the Risk Management Engine for position sizing and account compliance
For position sizing, drawdown compliance, and trade logging, pair with Risk Management Engine | Anonycryptous.
For complete session analysis and market context, pair with Environment | Anonycryptous.
Together, the three tools cover strategy context, signal generation, and risk execution — a complete framework for structured trading.
13. Disclaimer
This indicator is provided for educational and informational purposes only. Nothing in this document constitutes financial advice or any form of recommendation.
All trading decisions are made entirely by the user. The indicator provides signal analysis based on configurable parameters — the relevance of any output depends on how those parameters are set and the market conditions in which the indicator is used.
Trading financial instruments involves substantial risk of loss. Past performance of the backtest function is not indicative of future results. You may lose all of your invested capital.
Anonycryptous accepts no responsibility or liability for any losses incurred as a result of using this indicator or any content in this manual.
Indicator
Spectra Inflection [JOAT]Spectra Inflection
Introduction
Spectra Inflection is an advanced open-source momentum oscillator that replaces conventional RSI with a Laguerre-domain filter, applies Jurik Moving Average (JMA) adaptive smoothing, and overlays a Zero-Lag EMA (ZEMA) signal line to produce a momentum reading with substantially less lag and noise than standard oscillators. The indicator then layers on Schmitt trigger state transitions, dynamic VWMA bands, gradient histogram rendering, momentum divergence detection, velocity and acceleration tracking, squeeze detection, exhaustion signals, and a comprehensive 16-row dashboard — all in a single pane.
This indicator exists because traditional momentum oscillators like RSI suffer from two fundamental problems: lag and noise. Lag causes late entries and exits. Noise causes false signals in choppy markets. Spectra Inflection addresses both by combining a Laguerre filter (which compresses price history into a shorter effective window without losing smoothness) with JMA adaptive smoothing (which tracks fast moves closely while filtering out chop). The result is a momentum curve that responds to genuine trend shifts quickly while remaining stable during consolidation.
Core Concepts
1. Laguerre RSI Core
The Laguerre filter is a four-element recursive filter originally developed by John Ehlers. Unlike a standard RSI that uses a fixed lookback window, the Laguerre filter uses a damping factor (alpha) to create an exponentially-weighted cascade of four internal registers (L0 through L3). This produces a smoother, more responsive oscillator:
float gamma = 1.0 - alpha
L0 := alpha * close + gamma * nz(L0 )
L1 := -gamma * L0 + nz(L0 ) + gamma * nz(L1 )
L2 := -gamma * L1 + nz(L1 ) + gamma * nz(L2 )
L3 := -gamma * L2 + nz(L2 ) + gamma * nz(L3 )
The cumulative up/down movements across all four registers are then computed to derive an RSI-like value scaled 0-100. Lower alpha values produce smoother output (more filtering), while higher values produce faster response. The default alpha of 0.07 provides a balance between responsiveness and noise rejection.
2. JMA Adaptive Smoothing
The raw Laguerre RSI output is then passed through a Jurik Moving Average, which is a proprietary-class adaptive filter. JMA uses a volatility-tracking mechanism to adjust its smoothing dynamically: when the input is volatile, JMA tracks more closely; when the input is stable, JMA smooths more aggressively. This means the momentum line hugs genuine reversals tightly while filtering out noise during consolidation. The JMA implementation uses three parameters: period (smoothing length), phase (lead/lag adjustment), and power (responsiveness curve).
3. ZEMA Signal Line
A Zero-Lag EMA is calculated on the JMA-smoothed momentum line. ZEMA works by computing two EMAs and extrapolating the difference to cancel out the inherent lag:
ema1 = ta.ema(src, len)
ema2 = ta.ema(ema1, len)
zema = ema1 + (ema1 - ema2)
Crossovers between the momentum line and the ZEMA signal line generate potential entry and exit signals. The indicator scores each crossover based on the angle of approach, distance from the midline, and volume context to produce a "cross quality" rating.
4. Schmitt Trigger State Machine
Rather than using simple threshold crossings (which produce whipsaws), the indicator uses a Schmitt trigger — a hysteresis-based state machine where the entry threshold differs from the exit threshold. For example, the momentum line must cross above 62 to enter a bullish state, but must drop below 55 to exit it. This prevents rapid flip-flopping in choppy conditions and produces cleaner, more tradeable state transitions.
5. Dynamic VWMA Bands
Volume-Weighted Moving Average bands are calculated around the momentum line. These bands expand when volume is high (indicating conviction) and contract when volume is low (indicating indecision). Price touching or exceeding the bands while momentum is extended signals potential exhaustion or continuation depending on the volume context.
Features
Gradient Histogram: A color-gradient histogram below the momentum line shows the distance from the midline (50). Colors shift smoothly from muted near the center to vivid at extremes, providing instant visual feedback on momentum intensity without cluttering the chart
Neon Glow Rendering: The main momentum line uses a multi-layer plot technique where progressively wider, more transparent copies of the line are stacked to create a subtle glow effect that intensifies with momentum strength
Momentum Divergence Detection: The indicator detects both regular and hidden divergences using fractal pivot anchoring. When price makes a new high but the Laguerre RSI makes a lower high (bearish divergence), or price makes a new low but the oscillator makes a higher low (bullish divergence), the indicator draws divergence lines and labels
Velocity and Acceleration Tracking: First and second derivatives of the momentum line are calculated and smoothed. Velocity shows the rate of momentum change; acceleration shows whether momentum is speeding up or slowing down. These are displayed in the dashboard
OB/OS Exhaustion Detection: When momentum reaches extreme overbought or oversold levels with declining velocity, the indicator flags potential exhaustion points where reversals are more likely
Cross Quality Scoring: Each momentum/signal crossover is scored 0-100 based on the angle of the cross, distance from the midline, and whether volume confirms the move. Higher scores indicate higher-conviction crosses
Band Squeeze Detection: When VWMA bands contract below a threshold, the indicator identifies a "squeeze" condition — compressed momentum that often precedes a sharp expansion move
Midline Conviction Signals: Crosses of the 50 midline are tracked with volume confirmation to identify shifts in the underlying momentum bias
Momentum Regime Classification: The dashboard classifies the current momentum state as Trending Bull, Trending Bear, Ranging, or Transitional based on the composite of all sub-systems
16-Row Dashboard: A comprehensive real-time table displays Laguerre RSI, JMA momentum, ZEMA signal, state, velocity, acceleration, cross quality, band width, squeeze status, divergence history, regime classification, and more
Input Parameters
Laguerre Core:
Alpha: Damping factor for the Laguerre filter (default: 0.07). Lower = smoother, higher = faster
JMA Smoothing:
Period: JMA smoothing length (default: 8)
Phase: Lead/lag adjustment from -100 to +100 (default: -50)
Power: Responsiveness curve (default: 0.6)
Signal Line:
ZEMA Length: Period for the zero-lag signal line (default: 13)
State Thresholds:
Bull Entry/Exit: Schmitt trigger thresholds for bullish state (default: 62/55)
Bear Entry/Exit: Schmitt trigger thresholds for bearish state (default: 38/45)
VWMA Bands:
Band Length: VWMA calculation period (default: 20)
Band Width: Multiplier for band distance (default: 1.5)
Visuals:
Toggles for histogram, glow, divergence lines, bar coloring, background zones, squeeze markers, and dashboard
How to Use This Indicator
Step 1: Identify the Momentum Regime
Check the dashboard's regime classification. In trending regimes, look for pullback entries in the direction of the trend. In ranging regimes, look for mean-reversion setups at the VWMA band extremes.
Step 2: Wait for Schmitt Trigger State Transitions
Rather than acting on every oscillator wiggle, wait for the Schmitt trigger to confirm a state change. A transition from neutral to bullish (momentum crossing above the bull threshold with hysteresis) is a higher-conviction signal than a simple RSI crossing 50.
Step 3: Confirm with Cross Quality
When a momentum/signal crossover occurs, check the cross quality score. Scores above 60 indicate strong, angled crosses with volume confirmation. Scores below 30 suggest weak, flat crosses that are more likely to fail.
Step 4: Watch for Divergences
Divergences between price and the Laguerre RSI often precede reversals. Regular divergences signal potential trend changes; hidden divergences signal trend continuation. Use these in conjunction with the regime classification for context.
Step 5: Monitor Squeeze and Exhaustion
Band squeezes indicate compressed momentum — prepare for a breakout. Exhaustion signals at OB/OS extremes with declining velocity suggest the current move is losing steam.
Indicator Limitations
Like all momentum oscillators, this indicator is a lagging derivative of price. It confirms moves rather than predicting them
The Laguerre filter's alpha parameter significantly affects behavior — values that work well on one timeframe or instrument may need adjustment for others
Divergence detection uses fractal pivots which require a right-bar confirmation delay (default 5 bars). Divergences are identified after the fact, not in real-time
The Schmitt trigger prevents whipsaws but also delays state transitions. In fast-moving markets, the state change may come after a significant portion of the move has already occurred
Volume-based features (VWMA bands, cross quality scoring) work best on instruments with reliable volume data. On forex or instruments with synthetic volume, these features may be less meaningful
This is a momentum tool, not a complete trading system. It should be combined with trend structure, support/resistance, and risk management for actual trading decisions
Originality Statement
This indicator is original in its synthesis of multiple advanced signal processing techniques into a unified momentum analysis system. While individual components (Laguerre filters, JMA smoothing, ZEMA, Schmitt triggers) are established concepts in technical analysis and signal processing, this indicator is justified because:
The Laguerre-to-JMA-to-ZEMA processing chain creates a momentum signal with properties not achievable by any single technique alone — the Laguerre provides the raw momentum extraction, JMA provides adaptive noise filtering, and ZEMA provides a lag-compensated reference
The Schmitt trigger state machine replaces simple threshold crossings with hysteresis-based transitions, substantially reducing false signals in choppy conditions
Cross quality scoring provides a quantitative measure of signal conviction that is not available in standard oscillator implementations
The integration of velocity, acceleration, exhaustion detection, squeeze detection, and divergence analysis into a single coherent pane eliminates the need for multiple separate indicators
Dynamic VWMA bands provide volume-contextual overbought/oversold boundaries rather than fixed levels
Disclaimer
This indicator is provided for educational and informational purposes only. It is not financial advice or a recommendation to buy or sell any financial instrument. Trading involves substantial risk of loss. Past performance of any indicator does not guarantee future results. The momentum readings, state classifications, and signals displayed are mathematical calculations based on historical price data — they do not predict future price movement. Always use proper risk management and conduct your own analysis before making trading decisions. The author is not responsible for any losses incurred from using this indicator.
-Made with passion by officialjackofalltrades
Indicator
Fixed High Timeframe Moving AveragesFixed High Timeframe Moving Averages (W/D/4H)
Summary
This indicator plots essential, high-timeframe (HTF) Moving Averages onto your chart, **no matter which timeframe you are currently viewing**.
It is designed for traders who need multi-timeframe context at a glance. Stop switching charts to see where the 200-Week or 50-Day MA is—now you can see all critical HTF levels directly on your 5-minute (or any other) chart.
---
Who it’s for
Traders who rely on moving averages but like to work on lower chart timeframes while keeping higher timeframe context in sight. If you scalp on 1–15m yet want Weekly/Daily/4H MAs always visible, this is for you.
---
What it shows
Pinned (“fixed”) moving averages from higher timeframes—Weekly (20/100/200) , Daily (50/100/200/365) and 4H (200) —rendered on any chart timeframe. Your favorite HTF MAs stay on screen no matter what TF you’re currently analyzing.
---
Features
* **MA types:** SMA, EMA, VWMA, Hull.
* **Fully configurable:** toggle each line, set periods, colors, and thickness.
* **Two alert modes (see below):** intrabar vs confirmed HTF close.
* **Works on any symbol & chart TF** using `request.security` to fetch HTF data.
---
Alerts & Modes
This indicator solves the biggest problem with MTF alerts: false signals. You can choose one of two modes:
1. **Intrabar mode** — compares current chart price to the HTF MA. Triggers as soon as price crosses the HTF line; great for early signals but may update until the HTF bar closes.
2. **Confirmed mode** — checks HTF close vs HTF MA. Signals only on the higher-TF bar close; fewer false starts, no intrabar repainting on that TF.
Per-line *Cross Above / Cross Below* conditions are provided for all enabled MAs (e.g., “20W — Cross Above”, “365D — Cross Below”, etc.).
**How to use alerts:** add the script → “Create Alert” → pick any condition from the script’s list.
---
Why this helps
* Keeps Weekly/Daily structure visible while you execute on LTF.
* Classic anchors (e.g., 200D, 20W/100W/200W) are popular for trend bias, dynamic support/resistance, and pullback context.
* Lets you standardize MA references across all your lower-TF playbooks.
---
Notes on confirmation & repainting
* Intrabar signals can change until the higher-TF bar closes (that’s expected with multi-TF data).
* Confirmed mode waits for the HTF close—cleaner, but later. Choose what fits your workflow.
---
Quick setup
1. Pick `MA Type` (SMA/EMA/VWMA/Hull).
2. Enable the HTF lines you want (Weekly 20/100/200; Daily 50/100/200/365; 4H 200).
3. Choose `Alert Mode` (Intrabar vs Confirmed).
4. Style colors/widths to taste and set alerts on the lines you care about.
---
Good practice
* Combine HTF MAs with price action (swings, structure, liquidity grabs) rather than using them in isolation.
* Always validate signals in your execution TF and use a risk plan tailored to volatility.
* Protect your capital: position sizing, stops, and disciplined risk management matter more than any single line on the chart.
---
Disclaimer
For educational/informational purposes only; not financial advice. Trading involves risk—manage it responsibly. Indicator
Indicator
pickle financialversion 1.0
A multi-use indicator
FEATURES:
1) Robust VWAP with up to 3 deviations that can be adjusted for Session, Week, Month, Quarter, Year, Decade, Century, Earnings , Dividend, & Split intervals
2) 20 customizable Moving Averages that can be changed to EMAs, SMAs , WMAs, SMMAs, and VWMAs; can also be adjusted to Candle Closes, Highs, Lows, Opens, HLC3, HL2 , OHLC4, & HLCC4
-Praise be lady VWAP Indicator
Indicator
