Smart Money Confluence Suite [EQH/EQL, OB/FVG, Sweeps]Smart Money Confluence Suite combines four complementary structure- and liquidity-based concepts into a single multi-timeframe overlay, built for traders who use price structure and liquidity zones as confluence rather than relying on a single signal type.
1. Equal Highs / Equal Lows (EQH/EQL) — multi-timeframe The script requests 4H and Daily price data independently of the chart's timeframe using request.security(), and compares each new high/low to the prior one within a configurable tolerance (default 0.08%). When two highs (or lows) fall within that tolerance, the script plots a level and label marking the equal-high/equal-low zone. These zones commonly represent areas of resting stop-loss liquidity above/below range extremes. Levels are automatically removed once price trades through them (mitigation), so only unmitigated, still-relevant levels remain on the chart.
2. Fair Value Gaps (FVG) A Fair Value Gap is identified using the classic 3-candle imbalance definition: when the low of the current candle is higher than the high of the candle two bars back (bullish), or the high of the current candle is lower than the low of the candle two bars back (bearish), the script draws a box marking that gap. These zones often act as areas price returns to "rebalance" before continuing in the direction of the original move.
3. Order Blocks (OB) The script flags the last opposite-colored candle immediately preceding a directional break: a bearish candle followed by a bullish candle that closes above the bearish candle's high (bullish OB), or the inverse for bearish OB. These are treated as candidate zones of institutional order flow. Each order block box automatically extends forward and is deleted once price closes through it, so only active, unmitigated blocks are shown.
4. Liquidity Sweeps Using ta.pivothigh()/ta.pivotlow() with a user-configurable swing strength, the script tracks the most recent unbroken swing high/low. A sweep is flagged (and the candle is colored) when price wicks beyond that swing point intrabar but closes back inside the prior range — a common signature of stop-hunt / liquidity-grab behavior before a reversal or continuation move.
How to use it: All four modules can be toggled independently from the settings panel, along with colors, line width, EQ tolerance, and swing sensitivity. The script is designed as a visual confluence layer — combine EQH/EQL levels, FVGs, order blocks, and sweep signals with your own directional bias (e.g., trend, VWAP, or market structure) rather than trading any single element in isolation. It works on any symbol and timeframe, and was primarily tested on futures and index instruments (Russell 2000, Nasdaq, ES/MES/MNQ).
Originality note: this script's contribution is combining independently-calculated multi-timeframe EQH/EQL detection, 3-candle FVG imbalance, break-of-structure order block identification, and pivot-based liquidity sweep detection into one coordinated, auto-mitigating toolkit — rather than publishing each concept as a separate script.
Disclaimer: This is a visual analysis tool for identifying structure and liquidity zones. It does not generate buy/sell signals and is not financial advice. Use your own risk management and judgment. Indicator
Strong Gold Signals | ProjectSyndicateStrong Gold Signals catches the moment a liquidity grab runs out of fuel — price stabs beyond a level, traps the breakout crowd, then rolls over — and fires the reversal the instant the sweep stops extending. Markets hunt the obvious highs and lows: a candle pushes through a prior swing, an HTF extreme, or a session high/low, spikes just far enough to trip the stops resting there, then rejects with a long wick and closes back showing the move had no follow-through. That failed grab is the event. The engine measures how clean and how loaded that sweep is as a 0–10 Reversal Strength and fires AGAINST the grab — with the snap-back, not with the trap. Every setup gets a structural invalidation level behind the sweep extreme, fixed R-based targets, a 0–10 strength with a 1–4 star rank, and is tracked live on a full statistics dashboard — including honest stop-outs — so you can see exactly how the logic behaves on the symbol and timeframe you trade.
🧠 Sweep Core — the core idea, expressed as a lifecycle: LEVEL ▸ GRAB ▸ REJECTION ▸ STALL ▸ REVERSAL. A fresh liquidity level defines where stops are resting. A grab happens when price closes beyond that level with a rejection wick — the raid that runs the stops and then gets sold (or bought) back into range. The sweep is allowed to keep extending as long as it makes new extremes; the reversal fires on the first confirmed bar that fails to push past the sweep's high or low. Swept highs flip to a SHORT, swept lows to a LONG. Pivots come from confirmed swings and every condition is evaluated on the bar's close, so the structure and the signal do not repaint once they confirm.
🔎 Three Liquidity Sources — you choose what counts as the liquidity being swept. Macro Pivots uses confirmed swing highs and lows and is the validated default on intraday gold. HTF Previous Bar uses the prior higher-timeframe bar's high and low, so the engine hunts the levels bigger players watch. Session High/Low tracks the Asian, London, and New York ranges and reacts when a session extreme is raided. One switch changes the entire character of what the engine treats as a stop-hunt, without touching the rest of the logic.
🔋 Strength Anatomy — a sweep is not just true or false; it is scored for how clean the reversal setup is. The Reversal Strength fuses reversal-native ingredients into a single 0–10 read: trend context (how the higher structure frames the fade), rejection wick (how decisively the grab was rejected), volatility regime (calmer conditions favor clean snap-backs over runaway sweeps), mean proximity (how stretched price is from its baseline), and sweep depth (how far past the level the raid reached before stalling). Each ingredient carries its own weight and contributes to the 0–10 total, and you shape what qualifies through those weights and the wick threshold rather than chasing a single number.
🎯 Structural Invalidation + R-Based Targets — the stop is anchored to the sweep, not guessed. Invalidation sits just beyond the sweep extreme — the price that, if reclaimed, means the grab was real and the reversal failed — plus an ATR buffer for cushion. That distance is then clamped between an ATR floor and an ATR ceiling, so a stop never balloons into a wide one and the 1R target never collapses into a tight scalp. TP1, TP2, and TP3 are set at clean R multiples, defaulting to a deliberately wider 1.5R / 3R / 5R so winners are given room to travel, and fully adjustable to your reward profile. Every signal plots its complete Entry / SL / TP1 / TP2 / TP3 line set, labeled level prices, the swept liquidity level itself, and filled TP / SL zone boxes, with a result label on exit — and every zone is drawn at the same fixed width, so short trades and long trades leave an identical, uniform footprint on the chart.
⭐ 0–10 Strength with Star Tiers — every signal is labeled with its numeric strength, a star rank, and a tier ladder running MINIMAL → WEAK → MODERATE → STRONG → ELITE, so the raw quality of a setup reads at a glance without checking the number. Treat the strength as a cleanliness and confluence read for ranking and thinning setups — it describes how textbook a sweep-and-reject is, not a guaranteed outcome. The Minimum Stars gate restricts what is taken and alerted, while the dashboard keeps tracking every tier in the background so you can see, on your own data, whether higher tiers actually convert better.
🎚️ Conviction Controls — a compact set of dials sets how serious a sweep must be before it counts: the Minimum Stars To Take (the tier floor to fire at all), the Alert Minimum Stars threshold, the Min Reversal Wick that defines a genuine rejection, the Pivot Length that decides which swings qualify as liquidity, the Stop Buffer beyond the sweep, and the max-risk cap and min-risk floor that keep the stop sane. Tighten them for fewer, cleaner reversals; loosen them for more activity. This is your main control over conviction versus frequency.
🧭 Single-Ticket Discipline & Honest Accounting — only one ticket is active at a time, and a Signal Cooldown enforces a minimum gap between entries so one violent, choppy session can't stack overlapping trades. Resolution is SL-first pessimistic with honest partial-target accounting — if a stop is hit after TP1 or TP2, that partial result is booked rather than rounded up to a full win. A time-stop closes any trade that neither targets nor stops within a generous window, so nothing sits open forever and the on-chart statistics track how the setups actually run to target.
📊 Live Statistics Dashboard — a non-intrusive panel tracks, in real time on your chart: the current status (scanning → trade active) and the active trade side, the last signal with its star score, win rate, total closed trades, profit factor, average R per trade, best-performing direction, long vs short win rate, current and max win/loss streaks, and a TP1 / TP2 / TP3 / SL outcome breakdown. A multi-timeframe trend strip shows the current and two higher-timeframe biases at a glance, a Win Rate By Strength table breaks results out by star tier, and a Last Trades ledger lists the most recent outcomes. Every filled trade that reaches an outcome is counted — winners and stop-outs alike — so the numbers are computed live from the real signals on your current symbol and timeframe, not a figure printed in a description.
🎨 Clean Themed Visuals — six coherent palettes, all tuned for a black chart background — Aurora (the clean mint-and-rose default), Gold Noir, Ice Blue, Aqua Violet, Neon Magenta, and Institutional — shade the signal labels, the per-trade SL / TP ladder and zone boxes, the swept-level and pivot-liquidity markers, and the dashboard to one consistent look, so direction and quality read at a glance. Each reversal prints a labeled GOLD LONG or GOLD SHORT signal with its strength, star tier, and direction. A max-drawn-trades cap keeps only the most recent tickets on the chart while the statistics stay cumulative over the full history.
🔔 Detailed Alerts — fires on a Strong Long Reversal, a Strong Short Reversal, any reversal, and on TP3 Hit, Partial TP Exit, and SL events, formatted for manual or automated use. The strength gate can restrict alerts to higher-conviction setups only.
🔧 Fully Customizable — every component is exposed: the liquidity source and its pivot length, HTF resolution, session times and timezone, and the reversal-wick threshold; the ATR length, stop buffer, max-risk cap and min-risk floor, and the three R targets; the cooldown, the time-stop window, the uniform zone width, and the max historical trades drawn; the minimum-stars gate, the alert threshold, and each of the five strength weights; the dashboard position, size, and every section toggle including the MTF strip and its two timeframes; all six themes; and every signal label, star, line, box, level tag, and dashboard element.
🎯 Why this is different — most reversal tools flag a wick or a divergence after the fact. This one treats the liquidity grab and its exhaustion as the event, scores how clean that sweep-and-reject is across trend context, rejection, volatility, stretch, and sweep depth, and fires only when the raid stops extending — catching the snap-back at its origin — then anchors invalidation behind the sweep, ranks every setup on an objective 0–10 scale, and layers a live, honest statistics panel that counts stop-outs in full. You tune and judge it on real, current data from your own chart instead of a marketing number.
🚀 Where to use it — the engine was built and tuned on XAUUSD (gold) on intraday timeframes, where liquidity hunts, session raids, and stop-runs are a constant feature — but the mechanics are symbol-agnostic and rest on universal behavior: every liquid market sweeps its obvious highs and lows. It can be applied to FX majors and crosses, metals, indices, and crypto on intraday timeframes, with the pivot length and ATR-based stop adapting to each instrument's volatility. Because it fades exhaustion, it shines around session extremes and range edges and demands more care in violent one-way trends, where a sweep can keep extending rather than reject — let the dashboard tell you whether the logic suits the pair and timeframe before you commit.
🎯 How to trade it
Apply it to a liquid symbol on an intraday timeframe and let the dashboard populate. Read the live win rate, profit factor, and average R for your symbol and timeframe first — if the logic doesn't suit that market, you'll see it.
Wait for a labeled GOLD LONG / GOLD SHORT reversal — it marks a confirmed close where liquidity was swept and rejected and the sweep has stopped extending, with the strength, star tier, and full Entry / SL / TP1 / TP2 / TP3 already plotted.
Read the star tier and the swept level for a fast conviction check — a decisive rejection at a clean level and a higher tier mean a more textbook fade.
Manage the trade with the plotted levels — the ATR-clamped structural stop sits beyond the sweep and defines your risk, and the wider TP1/2/3 sit at your chosen R multiples. Bank or trail however suits your style.
Use the Minimum-Stars floor, the reversal-wick threshold, the pivot length, the cooldown, and the liquidity source to set your tempo — stricter for fewer, cleaner reversals; looser for more activity — and lean on the star tier to focus on the most textbook grabs.
⚠️ Important — this is a decision-support tool, not a standalone buy/sell system, and it makes no performance guarantees. Default settings were chosen on historical gold data and behavior will vary by symbol, timeframe, session, and configuration; the dashboard's statistics are historical and descriptive, not a forecast. The trade model resolves stop-first and books partial-target exits honestly, so some trades close for a fraction of a target rather than a full win — these are counted in full, which is honest but means win rate alone is misleading; because the targets are intentionally wide, expect a lower headline win rate and always weigh it together with average R and profit factor, and resize the R targets to your own risk profile. Signals confirm on the closed bar, and the pivot-based liquidity source confirms a few bars after a swing forms — so always wait for the labeled reversal on a closed candle. Because the system fades a move, a real breakout or a sweep that keeps extending can run straight through a stop — combine it with your own analysis and risk management, and test it on your market before trading it live. Indicator
Sweep TerminalSweep Terminal
Description:
Welcome to Sweep Terminal, an elite all-in-one institutional trading indicator designed for maximum precision. Developed by erdensedat, this tool provides unparalleled clarity on price action, liquidity sweeps, market structure shifts, and daily biases—all without cluttering your chart. It seamlessly integrates Multi-Timeframe (MTF) analysis, an advanced Fair Value Gap (FVG) engine, dynamic BOS/CHoCH mapping, and real-time session tracking.
Core Features:
1. Live Market Info Panel
A dynamic, non-intrusive table situated at the top right of your screen providing instant, actionable data:
Directional Biases: Instantly know the Daily, Weekly, and VWAP bias (Bullish/Bearish).
Momentum & Trend: Real-time RSI momentum value and raw DI+ / DI- (Directional Movement) data. The dominant DI force is automatically color-coded for quick visual confirmation.
Active Structure: Displays the most recent character of the market (Bullish/Bearish Structure).
Session Status: Real-time sync with the Europe/Istanbul timezone. Displays exactly which session is active (Asian, London, NY) or which one is upcoming, indicated by active Green/Red LED dots.
2. MTF Sweep Logic & Opening Ranges
Understanding where liquidity lies is crucial. This module automatically detects and highlights major High/Low levels across key timeframes (1 Hour, 4 Hour, 1 Daily).
Sweep & Raid Detection: Highlights potential liquidity sweeps (shadow boxes) in real-time and explicitly marks confirmed "Raids" with directional triangles once the price deviates and closes back within the range.
Discount/Premium Pricing: H/L pivot lines clearly dictate "Premium" (Short) and "Discount" (Long) equilibrium zones.
Session Killzone Pivots (Optional): Tracks session highs and lows. Once a session level is breached, the line freezes at the breakout point, turns dotted, and marks the raid with a clean "X" at the center.
3. Advanced Fair Value Gap (FVG) Engine
Our refined FVG engine ensures you only see the most significant imbalances.
Clean Visualization: Bullish FVG boxes default to a deep teal (#006064) and bearish to a dark crimson (#801922), complete with lightly opaque mid-lines for precise entries.
Smart Filtering: Removes overlapping FVGs, filters by threshold sizes, and offers customizable mitigation triggers (Close, Wick, or Average price).
Breaker Blocks: Seamlessly toggle between standard FVGs or Breaker block tracking.
4. Dynamic BOS & CHoCH Mapping
Stay on the right side of the trend with an automated structure mapping algorithm based on pivot fractals.
Pre-Break Candidates: Anticipate structure shifts with dashed candidate lines marking unmitigated Pivot Highs and Lows.
Confirmed Breaks: Once a level is breached, the line solidifies. Includes smart alert routing for instant notifications on structural shifts.
How to Use:
Liquidity Traps: Use the MTF Sweep Logic to spot when retail stops are triggered above a 4H or Daily high, providing high-probability mean reversion setups.
Confluence Trading: Check the live Panel. If the Daily/Weekly bias is Bullish, look for a Discount zone test, wait for a Bullish CHoCH, and enter on a lower timeframe FVG mid-line.
Customization: The settings menu is highly compartmentalized. Isolate specific logic (e.g., only show 1D sweeps, VWAP, and FVG) allowing this indicator to adapt perfectly to any Smart Money Concept (SMC) or ICT-based strategy.
Dedicated to clean charts and precise execution.
Disclaimer:
The information, scripts, and features provided by this tool are for educational and informational purposes only and do not constitute financial, investment, or trading advice. Trading in financial markets (including cryptocurrencies, forex, and stocks) involves a high degree of risk and may not be suitable for all investors. Past performance is not indicative of future results. Always conduct your own thorough research, backtest thoroughly, and consult with a certified financial advisor before making any trading decisions. The author (erdensedat) assumes no responsibility for any financial losses or damages incurred while using this script. Indicator
Liquidity Sweep Intelligence - ML Post-Sweep [Dots3Red]█ LIQUIDITY SWEEP INTELLIGENCE — KNN POST-SWEEP
Usually, a liquidity indicator shows where the price is likely to go to take liquidity. This one tells you what tends to happen after it gets there.
When price sweeps a swing high or low — triggering the stop orders sitting there — we face the immediate question: does it reverse (a stop hunt, fade the move) or does it continue (a genuine breakout)? The answer depends on context. This script tracks every historical sweep on your chart, records the contextual features at the moment it happened, and uses a KNN (K-Nearest Neighbors) model to find the most similar past sweeps and return their actual measured outcomes.
The probability shown is not derived from a formula. It is counted from real historical sweeps on your chart.
█ HOW IT WORKS
1. Pool Detection
Swing highs and swing lows are detected using two pivot lengths — a primary (default 10 bars each side) and a secondary (default 8 bars each side) — to capture both major and minor liquidity levels. Same-side pivots that form within the Equal-Level Tolerance % of each other are merged into a single stronger pool, marked with the ⊜ symbol. These are equal highs (EQH) or equal lows (EQL) — two peaks or two troughs at nearly the same price — which represent a higher concentration of stop orders than a single pivot.
Unswept pools are shown as lines on the chart: dashed for single pivots, solid for equal-level pools. Pools expire after the configured maximum age (default 50 bars) without generating a sweep record.
2. Sweep Detection
A sweep is registered when the close price exceeds a pool level by more than the Sweep Buffer (default 1.4 × ATR). This buffer filters out minor wicks that barely touch a level and requires a genuine close beyond it.
At the moment of the sweep, the script records:
• The direction (high swept or low swept)
• Whether the pool was an equal-level cluster (EQH/EQL)
• How old the pool was in bars
• The current ATR ratio (current volatility relative to the 50-bar baseline)
• Whether the sweep occurred inside an ICT killzone window
3. Outcome Measurement
After the Outcome Window (default 10 bars), the script measures what price actually did. For a swept high, it calculates how far price retraced downward and how far it continued upward, both expressed in ATR units. For a swept low, the directions are reversed. If the retracement exceeded the Reversal Threshold (default 3.5 × ATR), the sweep is classified as a reversal. Otherwise it is classified as a continuation. The result is stored in the KNN training data.
4. KNN Inference
The K-Nearest Neighbors model uses a 5-feature vector for each sweep:
• sweep_dir — was a high swept (1) or a low swept (0)?
• age_norm — how old was the pool when swept, normalized 0–1
• is_equal — was it an EQH/EQL cluster (1) or single pivot (0)?
• atr_ratio_norm — current ATR divided by 50-bar ATR baseline, capped at 3×
• in_kz — did the sweep occur inside a killzone window (1) or not (0)?
For each active sweep, the model computes the Euclidean distance to every recorded historical sweep in the training window, finds the K nearest matches (default 15), and returns three values averaged across those neighbors:
• Reversal probability — what percentage of matched sweeps reversed
• Average reversal distance — how far the reversal moved in ATR units
• Average continuation distance — how far the continuation moved in ATR units
The KNN runs every third bar per event for performance. Output is displayed only after the minimum training threshold (default 20 samples) has been reached.
5. Killzone Context
Four ICT killzone windows are tracked in New York time and used as a contextual feature in the KNN vector:
• Asia KZ — 20:00 to 00:00
• London Open KZ — 02:00 to 05:00
• NY Open KZ — 07:00 to 10:00
• London Close KZ — 10:00 to 12:00
Sweeps that occur inside a killzone are marked with ⚡ in the label. The active killzone is also shown in the dashboard.
█ READING THE LABEL
Each active sweep displays a label at the right edge of the chart:
▲ HIGH SWEPT ⊜ ⚡
Rev 68% | +1.4 ATR | N=47
▲ HIGH SWEPT — a swing high was swept (sell-side stops triggered)
⊜ — the pool was an equal-high cluster (stronger stop concentration)
⚡ — the sweep occurred inside a killzone window
Rev 68% — 68% of the 47 matched historical sweeps reversed
+1.4 ATR — the average reversal distance among those that reversed
N=47 — 47 historical sweeps matched this context
Label color follows sweep direction: orange-red for a swept high (bearish sweep), cyan for a swept low (bullish sweep).
While training data is still being collected, the label shows: Training… (8/20 needed)
█ LIQUIDITY VOID ZONE
When a sweep candle has a long wick, there is a gap between the wick extreme and where price actually closed. This zone — where price moved through too fast for normal order flow — is drawn as a semi-transparent dashed box. It represents an imbalance that price frequently returns to fill. The void is colored by sweep direction.
█ DASHBOARD
The top-right table shows:
• Session KZ — which killzone is currently active, if any
• ATR Ratio — current ATR relative to the 50-bar baseline (amber above 1.5×)
• KNN Training — progress bar showing recorded sweep outcomes vs maximum
• Overall Rev % — total reversal rate across all recorded sweeps on this chart
• Avg Rev Dist — average reversal move in ATR across all reversals
• Avg Cont Dist — average continuation move in ATR across all continuations
• Active Pools — number of unswept pools tracked, with EQH/EQL count
• Pending Sweeps — sweeps waiting for their outcome window to complete
• Resolved — count of confirmed reversals and continuations
• KNN Features — reminder of the five features used in the model
█ SETTINGS
Pool Detection
• Primary Pivot Length (10) — bars each side to confirm a major swing
• Secondary Pivot Length (8) — bars each side for minor swings; 0 disables
• Max Tracked Pools (60) — cap on active pools; oldest removed when exceeded
• Max Pool Age (50 bars) — pools older than this are expired without recording
• Equal-Level Tolerance % (3.0) — proximity threshold for EQH/EQL merging
Sweep Settings
• Sweep Buffer (1.4 × ATR) — minimum close beyond pool to register a sweep
• Outcome Window (10 bars) — measurement window after each sweep
• Reversal Threshold (3.5 × ATR) — minimum retracement to classify as reversal
• Show Liquidity Void Zones — toggle the wick imbalance boxes
• Max Historical Sweeps Shown — cap on how many past events are displayed
KNN Engine
• K Neighbors (15) — historical sweeps to average; higher = smoother, slower to adapt
• Max Training Samples (400) — rolling window; oldest samples dropped when exceeded
• Min Samples Before Display (20) — KNN output hidden until this threshold is reached
• ATR Baseline Period (50) — period for the baseline ATR used in the volatility feature
█ TIMEFRAME
Works on any intraday timeframe. Most useful at 5-minute through 1-hour where enough sweeps accumulate to build meaningful training data within a single session. On daily charts, the training window fills slowly but the signals tend to be higher quality.
The KNN model relearns continuously as new sweeps are recorded and old ones fall outside the rolling window. It adapts to the instrument and timeframe it is applied to.
█ NOTES
The reversal probability reflects historical behavior on this chart and timeframe. It is not a forward guarantee. A sweep with Rev 70% still continues 30% of the time. Use the N count as a confidence indicator — higher N means more matched examples and a more reliable estimate.
The model requires at least 20 sweep outcomes before displaying predictions. On timeframes with infrequent sweeps, this may take time to accumulate.
█ DISCLAIMER
This script is a visualization and analytical tool. It does not generate trade signals and does not constitute financial advice. Past sweep behavior does not guarantee future outcomes. Indicator
Sweep Runover Trend CandleEnglish Version
Title: Sweep Runover System
Description:
The Ultimate Sweep Runover System is a complete, all-in-one trading toolkit designed to detect liquidity sweeps, confirm structural shifts, and manage your risk automatically. Whether you are trading forex, crypto, or indices, this indicator visually guides you through the entire lifecycle of a trade from setup to take profit.
Key Features:
Liquidity Sweep Detection: Automatically plots structural highs/lows and marks liquidity sweeps with customizable lines and labels (default 'X').
Trend Confirmation (Hollow Candles): Filters out fake-outs by waiting for a candle close beyond the setup. Once confirmed, the trend changes dynamically, painting beautiful neon hollow candles (Green for Bullish, Red for Bearish).
Advanced Stop Loss & R:R Targets: Automatically calculates your Stop Loss based on either the Recent Swing or the Trigger Candle. It instantly plots customizable Risk-to-Reward (R:R) Target lines (T1, T2) directly on the chart with exact price labels.
MTF Dashboard: A sleek, customizable table that tracks the real-time trend status across your current timeframe and up to 4 higher timeframes simultaneously.
Session Killzones: Optional time filters allow you to only hunt for setups during specific high-volume trading sessions (e.g., London or NY Open).
Pro Alert System: Fully integrated with custom JSON Webhook alerts, making it plug-and-play ready for auto-trading bots (3Commas, PineConnector, etc.).
Beautiful Custom UI: Every visual element—from neon colors and line styles to label distances and historical line cleanup—can be easily customized in a highly organized settings menu.
How to Use:
Wait for the indicator to mark a sweep (X). If price confirms the runover, the candles will change color, and your SL/TP lines will appear. Manage the trade using the automatically plotted R:R targets and keep an eye on the MTF Dashboard for higher timeframe confluence!
Tamil Version (தமிழ்)
தலைப்பு: Sweep Runover System
விளக்கம்:
Ultimate Sweep Runover System என்பது மார்க்கெட்டில் நடக்கும் லிக்விடிட்டி ஸ்வீப்களை (Liquidity Sweeps) கண்டறிந்து, ட்ரெண்ட் (Trend) மாறுவதை உறுதிசெய்து, உங்கள் ரிஸ்க்கை (Risk) ஆட்டோமேட்டிக்காக நிர்வகிக்க உருவாக்கப்பட்ட ஒரு முழுமையான இண்டிகேட்டர் ஆகும். ஃபாரெக்ஸ், கிரிப்டோ அல்லது ஸ்டாக்ஸ் என எதில் ட்ரேட் செய்தாலும், என்ட்ரி முதல் டேக் ப்ராஃபிட் (Take Profit) வரை இந்த சிஸ்டம் உங்களை சரியாக வழிநடத்தும்.
முக்கிய அம்சங்கள்:
Liquidity Sweep Detection: மார்க்கெட் ஸ்ட்ரக்சரை அனலைஸ் செய்து, லிக்விடிட்டி ஸ்வீப்களை எளிதாகக் கண்டறிந்து குறியீடுகள் (X) மூலம் காட்டுகிறது.
Trend Confirmation (Hollow Candles): ஃபேக்-அவுட்களை (Fake-outs) தவிர்ப்பதற்காக, கேண்டில் க்ளோஸ் (Candle Close) ஆகும் வரை காத்திருந்து ட்ரெண்டை உறுதி செய்கிறது. ட்ரெண்ட் மாறியதும், அழகான நியான் ஹாலோ கேண்டில்களாக (Bullish-க்கு பச்சை, Bearish-க்கு சிவப்பு) நிறம் மாறும்.
Advanced Stop Loss & R:R Targets: உங்களின் ஸ்டாப் லாஸை Recent Swing அல்லது Trigger Candle அடிப்படையில் இதுவே கணக்கிட்டுக்கொள்ளும். மேலும், உங்களுடைய Risk-to-Reward (R:R) அடிப்படையில் டார்கெட் லைன்களை (T1, T2) சரியான விலையுடன் சார்ட்டிலேயே வரைந்து காட்டும்.
MTF Dashboard: நீங்கள் பார்த்துக்கொண்டிருக்கும் டைம்ஃபிரேம் மட்டுமின்றி, கூடுதலாக 4 பெரிய டைம்ஃபிரேம்களின் (Higher Timeframes) ட்ரெண்ட் நிலையை ஒரே டேஷ்போர்டில் உடனுக்குடன் தெரிந்துகொள்ளலாம்.
Session Killzones: மார்க்கெட்டில் வால்யூம் அதிகமாக இருக்கும் நேரங்களில் (எ.கா. London / NY Session) மட்டுமே ட்ரேட் செய்ய, பிரத்யேக டைம் ஃபில்டர்கள் (Time filters) கொடுக்கப்பட்டுள்ளன.
Pro Alert System: ஆட்டோ-ட்ரேடிங் பாட்களை (Auto-trading bots) பயன்படுத்துபவர்களுக்காகவே Custom JSON Webhook அலர்ட் வசதி கொடுக்கப்பட்டுள்ளது.
Beautiful Custom UI: நிறங்கள், லைன் ஸ்டைல்கள், மற்றும் டேஷ்போர்டு டிசைன் என அனைத்தையும் செட்டிங்ஸில் உங்களுக்கு ஏற்றவாறு எளிதாக மாற்றியமைத்துக் கொள்ளலாம்.
எப்படி பயன்படுத்துவது?
இண்டிகேட்டர் ஸ்வீப்பை (X) மார்க் செய்யும் வரை காத்திருங்கள். ட்ரெண்ட் பிரேக்-அவுட் ஆனதும் கேண்டில்களின் நிறம் மாறும், கூடவே உங்களின் SL மற்றும் டார்கெட் லைன்கள் சார்ட்டில் தோன்றும். ஆட்டோமேட்டிக்காக வரையப்படும் R:R டார்கெட்டுகளைப் பயன்படுத்தி ட்ரேடை வெற்றிகரமாக முடியுங்கள். MTF டேஷ்போர்டை கவனித்து மார்க்கெட்டின் பெரிய ட்ரெண்டோடு இணைந்து பயணியுங்கள்! Indicator
Session Killzones ICT ConceptSession Killzones - ICT Concept
Session Killzones plots the four standard ICT killzone sessions
(Asia, London, NY AM, NY PM) in New York time. It tracks unswept
session highs and lows in real time, fires alerts on sweeps, and
displays a compact session info panel with countdown.
Built for ICT traders who need to know which session levels are
still active and which have already been taken.
SESSIONS
Draws session boxes and boundary lines for each killzone in New
York time with automatic DST handling (EDT/EST). Each session is
fully customizable: name, time range, and color.
Default sessions (New York time):
Asia: 20:00 - 00:00
London: 02:00 - 05:00
NY AM: 08:30 - 11:00
NY PM: 13:30 - 16:00
Each session can be toggled on/off independently. Time ranges can
be modified to match your broker's session definition.
UNSWEPT LEVELS
When a session closes, its high and low are extended forward as
dashed lines. These are unswept levels session liquidity that
price has not yet taken.
When price reaches an unswept level, the line is automatically
removed from the chart. No manual cleanup needed. This gives a
live, self-cleaning view of which session levels still matter.
Sweep events fire an alert. Alerts are available for high sweeps
and low sweeps independently.
SESSION PANEL
A compact info panel shows session context at a glance. Three
detail levels:
Simple - shows the active session name and time remaining (or next session and time until open). Standard - adds today's percentage range for each session that has occurred, with direction indicator relative to session open.
Advanced - includes unswept level prices from all closed sessions directly in the panel, alongside the session breakdown.
SESSION COUNTDOWN
Inside a session: "NY AM - 1h 23m left"
Between sessions: "London in 4h 10m"
Color indicators :
Green: session is active
Yellow: less than 15 minutes remaining (closing warning)
Gray: currently between sessions
The countdown adapts to custom session times. If you change the
London session to 01:00-04:00, the countdown reflects that.
HOW TO USE
Session boxes show the developing high and low of each killzone as the session progresses.
Dashed lines extending beyond the box are unswept levels. These represent liquidity that price has not yet reached.
When a dashed line disappears, that level has been swept. It is no longer an active reference.
Use the percentage range in Standard mode to gauge which sessions were high-range versus low-range days.
Use the countdown to plan your analysis around session opens and closes. Most high-probability ICT setups occur within the first 30 to 90 minutes of a killzone.
Enable alerts on sweep events to get notified the moment a session high or low is taken, even if you are not at the screen.
SETTINGS
Display
- Chart Theme: Dark / Light
- Timezone: Auto DST / Manual UTC-4 (EDT) / Manual UTC-5 (EST)
Sessions (per session: toggle, name, time range, color)
- Asia, London, NY AM, NY PM
Appearance
- Show Session Box, High/Low Lines, Midpoint Line, Opening Price
- Lines Only mode: removes box fill, shows boundary lines only
- Line Thickness: 1 to 4
- Boundary Line Style: Solid / Dashed / Dotted
- Color Intensity: global transparency adjustment (-50 to +50)
Levels
- Show Unswept Levels: toggle
- Level Line Style: Solid / Dashed / Dotted
- Anticipation Zone: how far unswept lines extend right (candles)
- Show Level Price Labels: toggle
Info Panel
- Detail Level: Simple / Standard / Advanced
- Position: Top Left / Top Right / Bottom Left / Bottom Right /
Middle Left / Middle Right
- Size: Tiny / Small / Normal
Display Limits
- Show on Timeframe: 1M / 3M / 5M / 15M / 30M / 45M / 60M
- Show Last N Days: 1 to 30
NOTES
Session Killzones is open source under CC BY-NC-SA 4.0 and is intended for educational purposes only. Nothing in this script constitutes financial advice or a recommendation to buy or sell any instrument.
The DST resolver calculates timezone offset from bar time rather than the system clock, which means the indicator behaves correctly in PulseWire replay mode. If you replay to November 2023, the resolver returns EST, not the current wall-clock timezone.
The indicator is designed for intraday timeframes from 1M to 60M and works on any instrument available on PulseWire, though it is primarily optimized for forex majors and gold (XAUUSD).
Internally, all session state is tracked using explicit boolean arrays. No state is inferred from drawing object positions or line coordinates, which avoids a common source of bugs in session-based indicators. Indicator
Shark Hunt | AnonycryptousShark Hunt | Anonycryptous
Description & user manual
(Some chart snapshots below)
Why makes this indicator different?
Most liquidity indicators show you levels. They draw a box where a swing high or low formed and wait for price to return. They do not tell you whether the return matters. They do not filter what is noise from what is a genuine institutional event. They do not confirm whether the move that touched the level was a stop hunt or just a graze. They show you where. Not what.
Shark Hunt works differently.
It does not just detect liquidity zones. It hunts what happens at them — mechanically, bar by bar, through a multi-layer confirmation engine that evaluates wick penetration, volume, rejection strength, and optional pattern confluence before a signal fires. Every condition has a purpose. Every filter reflects something that institutional order flow actually leaves behind.
Most traders can look at a chart in hindsight and spot a liquidity sweep. They see the wick, they see the reversal, they understand what happened. The challenge is identifying it as it forms, before the move is over. That is what Shark Hunt is built to do.
And then there is the Failure Entry engine.
Not every meaningful institutional move starts at a marked zone. Sometimes price sweeps a structural pivot mid-chart — no zone, no prior markup — and reverses sharply. These are swing failure patterns: a wick through a recent high or low, a close back inside, and the market moving the other way. Shark Hunt includes a complete standalone engine for detecting and trading these setups, with its own signal system, trade block, and performance tracking. It is an indicator within an indicator. When you enable it, the entire color scheme shifts to make the mode change unmistakable.
Most indicators are built for one idea. Shark Hunt is built for two ways of reading the same market — and it tells you clearly which mode you are in.
Important notice
Shark Hunt generates trading signals based on pattern detection and volume analysis.
These signals are not financial advice.
They do not predict the future.
They do not guarantee profitability.
All trading decisions are made entirely by the user.
Always manage your own risk. Always apply your own judgment.
1. Overview
Shark Hunt is a liquidity zone detection and sweep confirmation indicator built around the behavior of institutional participants — how they build positions, how they run stops, and how that activity shows up on a chart.
What it includes:
- Impulse-scored liquidity zone detection at swing highs and lows
- Three-tier zone significance: scalp, intermediate, and major
- Multi-layer sweep confirmation: wick penetration, volume, rejection, and pattern gates
- Zone flip logic: broken support becomes resistance and vice versa
- Zone hold statistics with percentage display and liquidity value per zone
- Five price pattern detections: imbalances, absorption bars, price failures, level break retests, and wick traps
- Trade block visualization with configurable RR ratio, SL mode, and width
- Failure Entry engine: standalone SFP signal system with independent settings and trade blocks
- Sweep and failure mode color switching: fluor green/red for zone mode, fluor cyan/red for failure mode
- Neon glow rendering for both candles and zones: independently configurable
- Live dashboard showing active mode, zones, trade statistics, and PnL in R
- Alerts for zone sweep longs, zone sweep shorts, failure longs, and failure shorts
2. How zones are built
Shark Hunt detects liquidity pools at confirmed swing highs and lows using a pivot-based engine. Every zone is scored at the moment of formation using a composite impulse quality score — a weighted combination of body strength, volume relative to average, and bar range relative to ATR. Higher scores mean the move away from the zone was more decisive. When two zones form too close together, the weaker one is removed. Only the more significant level survives.
Zone significance is configurable in three modes:
-Scalp
Short pivot lookback. More zones formed, closer to current price. Suited for fast timeframes and intraday scalp setups.
-Intermediate
Balanced detection. A practical default across most instruments and timeframes.
-Major
Extended pivot lookback. Only the most significant structural levels qualify. Fewer zones, higher conviction per zone.
Each zone extends to the right in real time. A stats label shows the percentage of touches where price held without sweeping — the hold rate — and the estimated liquidity value at the formation bar, calculated as volume multiplied by price. These two numbers tell you how historically respected a zone is and how much institutional interest was present when it formed.
When price closes decisively through a zone, the zone flip logic converts it to the opposite side. A broken demand zone becomes supply. A broken supply zone becomes demand. This mirrors how smart money re-uses levels.
3. Sweep confirmation
A sweep fires only when all enabled conditions are satisfied on the same bar at close.
Wick penetration
The wick must break through the zone boundary by at least a configurable percentage of price. This filters grazes from genuine stop hunts. At 0.05%, small but intentional penetrations qualify. At 0.2% and above, only decisive spikes are counted.
Volume confirmation
The sweep bar must have volume at or above a configurable multiple of the rolling average. Institutional sweeps require size to move price and collect stops. A sweep on below-average volume is usually noise. This filter is toggleable.
Wick rejection
The wick that swept the zone must represent a minimum percentage of the bar's total range. A high rejection percentage means the bar closed far from its sweep extreme — price was pushed back hard. A low percentage means price drifted through and kept going. This filter is toggleable.
Pattern confirmation gates
Three optional gates can be added on top of the base sweep conditions:
- Require Price Failure (SFP): the sweep bar must also close back inside a recent pivot. Stop hunt confirmed by structure.
- Require Wick Trap: the sweeping wick must be at least twice the body size and larger than half an ATR. Pin-bar quality required.
- Require Absorption Bar: the sweep bar must fully engulf the previous candle. One-sided institutional commitment on the sweep itself.
Each gate is independent. Any combination can be active simultaneously. When all three are off, the base filters apply. When one or more are on, they stack as AND conditions — all must pass.
A cooldown setting prevents duplicate signals on the same level by requiring a minimum number of bars between confirmed sweeps.
When a sweep confirms, the zone is marked as swept and fades. A trade block is drawn showing the SL zone and TP zone based on the configured stop loss mode and RR ratio.
4. Price patterns
Five independent price pattern detections run continuously alongside the zone engine. Each can be toggled on or off.
-Price imbalances
Three-candle gaps where price moved too fast for two-sided trading. The gap between the first and third candle is visible as a small filled box. These areas act as magnets — price tends to return. A bull imbalance forms when a bullish candle leaves a gap above. A bear imbalance forms the same way in the opposite direction.
-Absorption bars
A candle that fully engulfs the previous candle in body. The current bar opened inside the prior bar's body and closed beyond it on the opposite side. This shows one side overpowering the other in a single bar — a sign of directional commitment. Marked with a small dot above or below the bar.
-Price failures
A bar that breaks a recent swing pivot with its wick but closes back inside. The market attempted a breakout, ran the stops beyond the pivot, then reversed. This is the mechanical signature of an institutional stop hunt at a structural level. Marked with a clean "F" label in bull or bear color.
-Level break and retest
When price closes through a recent pivot level and then returns to test it from the other side, a retest marker fires. Broken resistance retested as support, and vice versa. The cross marker appears at the retest bar.
-Wick traps
Candles with a wick at least twice the body size and larger than half an ATR. These mark areas of strong rejection. When a wick trap appears at or near a zone, it adds weight to the setup. Marked with a directional arrow.
5. Trade block
When a zone sweep confirms, a trade block is drawn from the signal bar forward. It shows the SL zone in red and the TP zone above or below entry.
Two stop loss modes are available:
-Zone mode
The stop is placed at the zone boundary plus a configurable ATR buffer. Consistent across setups — the SL is anchored to the structural level that defined the zone.
-Wick mode
The stop is placed at the deepest point of the sweep wick plus a configurable ATR buffer. Tighter, and closer to the actual sweep extreme. Can vary significantly bar to bar depending on wick size.
The RR ratio scales the TP distance as a multiple of the SL distance. At 1.0, TP equals SL distance — a 1:1 setup. At 2.0, TP is twice the SL distance. The trade block width in bars is configurable.
The backtest engine runs alongside the live chart. Every confirmed signal is tracked. When TP or SL is reached, the result is recorded as positive or negative R and accumulated in the dashboard.
6. Dashboard
The dashboard is displayed in a configurable position at tiny, small, or normal size.
It shows:
- Active mode: Sweep — on or off. Failure — on or off. Immediately visible at a glance.
- Depth: the current zone significance setting.
- Bull liquidity: number of active bull zones, with fresh zone count.
- Bear liquidity: same for bear zones.
- ATR: current ATR value for the active calculation period.
- Trades, longs, shorts, wins, losses, win rate: cumulative signal statistics.
- Total PnL in R: cumulative result across all signals.
- Expected value in R: average result per trade.
Mode colors are active throughout. In zone sweep mode, bull elements appear in fluor green. In failure entry mode, everything bull switches to fluor cyan. Bear elements remain in fluor red in both modes. The mode switch is visible across every element on the chart — zones, candles, markers, trade blocks, and the dashboard simultaneously.
7. Neon glow
Two independent glow systems are available under the Visuals section.
Neon glow candles
Three stacked plotcandle layers render the candles in fluor color with a soft outer glow. Body transparency and wick and border transparency are separately adjustable — softer body, harder wicks gives the most readable result. Two glow layers control the diffuse outer glow and the inner primary glow independently.
For best results: open chart settings, go to the Style tab, and set the default candle body, border, and wick to fully transparent. This removes the standard PulseWire candle rendering and lets only the glow candles show.
Neon glow zones
Four stacked box layers per zone produce a layered neon glow from the zone boundary outward. A single Zone Glow Strength slider controls all layers simultaneously — lower values produce a more intense neon effect, higher values produce a softer ambient glow.
Both systems work in both modes. When failure entry mode is active, the glow shifts to fluor cyan for all bull elements.
8. ⚡ The Failure Entry engine — the Bonus 🦈
Zone sweeps are the core of Shark Hunt. But not every institutional move starts at a marked level.
Sometimes price sweeps a structural pivot that has no zone drawn on it — a recent swing high or low that formed mid-session, between established zones. The move is decisive: a wick beyond the pivot, a close back inside, and price accelerating in the opposite direction. These are swing failure patterns. They are one of the cleanest institutional signatures available — a stop hunt at a structural level, confirmed by the bar's own price action.
The Failure Entry engine is a fully independent system inside Shark Hunt, built specifically to detect and trade these setups.
When Failure Entry mode is enabled, the zone sweep signal system is suspended. Zones remain on the chart as structural context — they often align with logical TP levels for failure trades. But entries come only from the failure engine.
The failure engine uses its own pivot lookback, separate from the zone detection engine. A dedicated wick size filter measured in ATR is the primary quality gate — it controls how large the failure wick must be relative to current volatility. Small values allow minor structural failures. Larger values require significant spike reversals. This is the primary lever for tightening or loosening signal quality.
A separate wick rejection percentage filter ensures the sweep bar closed convincingly away from its extreme. Volume confirmation with its own multiplier can be applied independently. A cooldown prevents duplicate signals on the same pivot.
The failure engine has its own trade block: fluor cyan for TP, fluor red for SL. The SL can be placed at the wick tip or at the pivot level itself, each with its own ATR buffer. The RR ratio and block width are independently configurable.
Performance is tracked separately. The failure PnL, win rate, and expected value accumulate in their own records and are reflected in the total dashboard figures. Every failure trade contributes to the overall session result.
Enabling failure entry mode changes the entire visual environment. All bull elements — zones, candles, markers, trade blocks — switch from fluor green to fluor cyan. The mode status rows in the dashboard confirm what is active at a glance. Switching modes is one toggle. The chart responds immediately across every element.
The failure engine is not a replacement for the zone sweep system. It is a complementary tool for catching institutional moves that do not begin at a pre-mapped level. Used in combination with the zone context still visible on the chart, it gives Shark Hunt coverage of both types of setup — the anticipated sweep at a known level, and the opportunistic reversal at an unmarked pivot.
9. Settings reference
9.1 Zone detection
- Pivot lookback: bars each side to confirm a swing high or low
- Zone significance: scalp, intermediate, or major
- Max active zones per side: upper limit on tracked zones
- Zone ATR width: zone height as a multiple of ATR
- Min zone separation (ATR): minimum distance between zones of the same type
- Show fresh zones only: hide swept zones or keep them faded
- Enable zone flip: convert broken zones to the opposite side
9.2 Sweep confirmation
- Min wick penetration (%): minimum wick break through zone boundary
- Volume confirmation: toggle volume filter on or off
- Min volume multiple: minimum sweep bar volume relative to average
- Volume average period: rolling volume baseline length
- Wick rejection filter: toggle wick size filter on or off
- Min wick rejection (%): minimum wick as percentage of bar range
- Cooldown bars between sweeps: minimum gap between signals
- Require price failure (SFP): optional pattern gate
- Require wick trap: optional pattern gate
- Require absorption bar: optional pattern gate
9.3 Price patterns
- Show price imbalances
- Show absorption bars
- Show price failures
- Show level breaks and retests
- Show wick traps
9.4 Trade block
- Show trade block on sweep
- RR ratio
- SL mode: zone or wick
- SL buffer (ATR)
- Trade block width (bars)
9.5 Visuals
- Bull and bear liquidity zone transparency
- Show zone stats label
- Show % hold
- Show liquidity value
- Zone label size
- Min % hold to show zone
- Enable neon glow candles
- Body transparency (soft)
- Wick and border transparency (hard)
- Primary glow strength
- Secondary glow strength (diffuse)
- Enable neon glow zones
- Zone glow strength
9.6 Failure entry
- Enable failure entry mode
- Pivot lookback
- Min failure wick (ATR)
- Min wick rejection (%)
- Volume confirmation
- Min volume multiple
- Cooldown bars between failures
- SL mode: wick or pivot
- SL buffer (ATR)
- RR ratio
- Trade block width (bars)
- Show trade block on failure
9.7 Dashboard
- Show dashboard
- Position: top left, top right, bottom left, bottom right
- Size: tiny, small, normal
10. How to use
10.1 Initial setup
1. Set zone significance to match your timeframe. Major works well on 3m and 15m as a starting point.
2. Enable the filters you want active. Volume confirmation and wick rejection are on by default — these are the minimum recommended filters.
3. Set your RR ratio. The default of 1.0 is conservative. Adjust based on your own risk management rules.
4. Decide whether to use zone mode or failure entry mode. Both can be tested and compared using the dashboard statistics.
5. If you want neon glow rendering, set default chart candles to transparent first, then enable the glow toggles.
10.2 Reading the chart
Zones in fluor green are bull liquidity pools — unfilled stop clusters below recent swing lows. Zones in fluor red are bear liquidity pools above swing highs. The opacity and label show how historically respected each zone is.
When price approaches a zone, watch the sweep confirmation criteria. A qualifying bar at close triggers the signal and draws the trade block.
"F" labels mark price failure patterns. When an F appears near a zone boundary, it strengthens the setup. A price failure at a liquidity zone is the clearest confluence available in Shark Hunt — a structural stop hunt confirmed by both the zone engine and the failure pattern simultaneously.
Imbalance boxes, absorption dots, retest crosses, and wick trap arrows all provide additional context. None of them are trade signals by themselves. They are confluence indicators — the more of them align with a zone sweep, the higher the contextual quality of the setup.
10.3 Illustrative bull scenario
Educational example only. Not a trading recommendation.
A swing low forms with strong impulse score. A bull liquidity zone is drawn below it, showing 100% hold and a high liquidity value. Several bars later, price dips into the zone with a sharp wick on elevated volume. The wick is larger than the body, covering more than 25% of the bar range. The bar closes above the zone boundary. A fluor green triangle fires below the bar. The trade block appears showing the TP zone above and the SL zone below. An "F" label also appears on the same bar — the zone sweep and the price failure both confirmed simultaneously.
10.4 Illustrative bear scenario
Educational example only. Not a trading recommendation.
Price rallies into a bear liquidity zone marked from a prior swing high. The approach candle is an absorption bar — a dot appears above it. On the next bar, a sharp spike above the zone on high volume forms a wick that covers more than 25% of the bar range, closing back below the zone top. The sweep confirms. A fluor red triangle fires above the bar. The trade block drops from entry to the TP target below. A wick trap arrow also marks the same bar — strong institutional rejection at a known supply level.
10.5 Using failure entry mode
Enable failure entry mode when you want to trade swing failure patterns without requiring a pre-mapped zone.
The zone boundaries remain on the chart. Use them as context. A failure trade that targets a nearby bull or bear zone as its TP has structural justification for the exit level.
The min failure wick (ATR) setting is the primary quality control. Start at 0.4. If you see too many minor failures firing, raise it. If the engine is missing moves you can see visually, lower it.
The dashboard will show failure-specific statistics. Compare the failure win rate and expected value to the zone sweep statistics. Over time, this data tells you which setup type performs better on your instrument and timeframe.
10.6 Timeframe guide
- 1m–2m: scalp depth, loose filters, high zone count, failure mode useful
- 3m–5m: recommended default settings, both engines perform well
- 15m: major depth, tighter wick penetration, fewer but higher quality setups
- 30m and above: increase pivot lookback for both zone and failure engines
11. Tip
The zone hold percentage is information. A zone with 0% hold has been swept every time price visited it. That is a weak zone — it may not hold the next time either. A zone at 95% hold has defended itself repeatedly. That is a level with a track record.
Volume confirmation is your noise filter. On most instruments, genuine institutional sweeps show up on volume. A sweep on below-average volume is usually a retail move or a thin-market spike. Keep volume confirmation on unless your instrument has unreliable volume data.
The pattern confirmation gates stack. Requiring price failure, wick trap, and absorption simultaneously will produce very few signals — but the ones that fire will have three independent confirmations in addition to the base sweep conditions. Use the gates selectively based on how many signals your timeframe normally generates.
Zone glow and candle glow are independent. You can use zone glow without candle glow, or both together. The neon rendering is a visual choice — it does not affect signal logic.
Failure mode changes everything visually. When you enable it, the entire chart shifts to fluor cyan for bull elements. This is intentional — it makes the mode switch obvious. There is no ambiguity about which engine is active.
The dashboard expected value is the most useful long-term metric. A positive expected value means the average signal generates profit over time. A negative value means the current settings lose on average even if the win rate looks reasonable. Track it across sessions to validate your configuration.
Chart snapshots:
12. Disclaimer
This indicator is provided for educational and informational purposes only. Nothing in this document constitutes financial advice or any form of recommendation. Trading financial instruments involves substantial risk of loss. Past performance is not indicative of future results. You may lose all of your invested capital.
Anonycryptous accepts no responsibility or liability for any losses incurred as a result of using this indicator.
Indicator
Indicator
Smart Money Structure Decoder [JOAT]Smart Money Structure Decoder
Introduction
The Smart Money Structure Decoder is an advanced open-source market structure indicator that identifies institutional footprints through Break of Structure (BOS), Change of Character (CHoCH), liquidity sweeps, price imbalances, and points of interest. This indicator transforms raw price action into actionable smart money intelligence, helping traders identify when institutions are accumulating positions, sweeping liquidity, and shifting market structure.
Unlike basic support/resistance indicators that simply mark price levels, this system analyzes market microstructure through pivot detection, liquidity pool tracking, imbalance zone identification, and multi-timeframe bias alignment. The indicator is designed for traders who understand that institutional activity leaves detectable footprints in market structure and that following smart money positioning offers edge in directional trading.
Why This Indicator Exists
This indicator addresses a critical challenge in trading: identifying when institutional players are actively positioning and when they're manipulating price to trigger retail stops before moving in their intended direction. The core innovation lies in systematically detecting smart money concepts:
Market Structure Analysis: Identifies Break of Structure (BOS) when price breaks previous highs/lows in trend direction and Change of Character (CHoCH) when price breaks counter-trend, signaling potential reversals
Liquidity Sweep Detection: Tracks when price briefly exceeds key levels to trigger stops then reverses, indicating institutional liquidity hunting
Price Imbalance Zones: Identifies fair value gaps where price moved too quickly, leaving inefficiencies that often get filled
Points of Interest (POI): Marks high-volume reversal zones where institutions likely established positions
Multi-Timeframe Bias: Confirms whether higher timeframe trend aligns with current timeframe structure
Volume Confirmation: Validates structure breaks and sweeps with volume surge analysis
Real-Time Metrics: Tracks cumulative counts of BOS, CHoCH, sweeps, imbalances, and POIs for pattern recognition
Each component reveals different aspects of institutional activity. BOS confirms trend continuation, CHoCH warns of reversals, liquidity sweeps show manipulation, imbalances mark inefficiencies, POIs identify accumulation zones, MTF bias validates conviction, and volume confirms genuine moves versus fakeouts.
Core Components Explained
1. Pivot Detection System
The indicator uses pivot analysis to identify significant highs and lows:
Pivot High = High that is higher than N bars before and N bars after (default N=10)
Pivot Low = Low that is lower than N bars before and N bars after (default N=10)
These pivots represent swing points where price temporarily reversed, marking potential support/resistance levels and liquidity pools. The pivot length parameter controls sensitivity - lower values detect more pivots (more sensitive), higher values detect only major pivots (less sensitive).
The indicator tracks the most recent pivot high and pivot low, along with their bar indices, to establish the current market structure framework.
2. Market Structure Tracking
The indicator maintains persistent structure variables:
Trend Direction: +1 for uptrend, -1 for downtrend, 0 for undefined
Last High: Most recent pivot high price and bar location
Last Low: Most recent pivot low price and bar location
Market structure evolves through two mechanisms:
Break of Structure (BOS):
- In uptrend: New pivot high exceeds previous pivot high (higher high)
- In downtrend: New pivot low breaks below previous pivot low (lower low)
- BOS confirms trend continuation and institutional commitment to direction
Change of Character (CHoCH):
- In uptrend: New pivot low breaks below previous pivot low (lower low in uptrend)
- In downtrend: New pivot high exceeds previous pivot high (higher high in downtrend)
- CHoCH signals potential trend reversal and shift in institutional positioning
The indicator counts cumulative BOS and CHoCH events, allowing traders to assess whether market is trending cleanly (high BOS, low CHoCH) or choppy (high CHoCH, frequent reversals).
3. Liquidity Pool and Sweep Detection
The indicator maintains arrays of liquidity levels (recent pivot highs and lows) and monitors for sweeps:
Liquidity Pool: Array of last 10 pivot prices and their bar locations
Sweep Detection Logic:
- Price exceeds liquidity level (high > level for highs, low < level for lows)
- Close returns below/above the level (close < level for high sweeps, close > level for low sweeps)
- Volume exceeds average volume * threshold (default 1.8x)
Liquidity sweeps are classic institutional manipulation where price briefly triggers stops at obvious levels then reverses. These often mark excellent entry points as institutions have cleared liquidity and can now move price in their intended direction.
The indicator draws dashed lines from the liquidity level to the sweep bar and places labels marking "SWEEP" events. Swept levels are removed from the liquidity array as they've been cleared.
4. Price Imbalance Detection
Imbalances (Fair Value Gaps) occur when price moves so quickly that it leaves gaps in the order book:
Bullish Imbalance:
- Current low > high from 2 bars ago (gap up)
- Gap size > ATR * 0.3 (significant gap, not just noise)
Bearish Imbalance:
- Current high < low from 2 bars ago (gap down)
- Gap size > ATR * 0.3
The indicator draws boxes around imbalance zones extending 10 bars into the future. These zones often act as magnets where price returns to fill the inefficiency. Institutions frequently use imbalances as entry zones, buying into bullish imbalances or selling into bearish imbalances.
Imbalance count tracks cumulative gaps, helping identify instruments or timeframes with frequent inefficient price action versus those with smooth, efficient movement.
5. Points of Interest (POI) Detection
POIs mark zones where institutions likely established significant positions:
POI Criteria:
- Volume > Average Volume * 1.8 (high participation)
- Bar range > ATR * 0.5 (significant price movement)
- Combination suggests institutional activity
The indicator places small labels at POI locations. These zones often provide support/resistance in future price action as institutions defend their positions or add to them.
POI count helps assess institutional activity levels - high POI counts suggest active institutional participation, low counts suggest retail-dominated or low-activity periods.
6. Multi-Timeframe Bias Analysis
The indicator requests close price from a higher timeframe (default 60m) and determines HTF trend:
HTF Trend = HTF Close > HTF Close ? Bullish : Bearish
MTF Alignment = Current Timeframe Trend matches HTF Trend
When MTF is aligned, trades in the trend direction have higher probability as both timeframes agree. When MTF is divergent, caution is warranted as timeframes conflict.
The dashboard displays alignment status (ALIGNED/DIVERGENT) and strength (STRONG/WEAK) based on how clearly both timeframes show directional bias.
7. Volume Analysis and Confirmation
Volume plays a critical role in validating structure:
Average Volume = 20-period SMA of volume
Volume Spike = Current volume > Average * threshold (default 1.8x)
Volume spikes confirm:
- BOS events (genuine institutional commitment)
- CHoCH events (real reversal, not fakeout)
- Liquidity sweeps (institutional participation)
- POI zones (significant positioning)
Low volume structure breaks often fail, while high volume breaks tend to follow through. The indicator uses volume confirmation throughout its detection logic.
8. Comprehensive Metrics Dashboard
The indicator tracks and displays 13 key metrics:
1. Trend: Current market structure direction (BULLISH/BEARISH/NEUTRAL)
2. Structure: Most recent event (BOS/CHoCH/NONE) with count
3. BOS Count: Cumulative break of structure events with status (HIGH/ACTIVE/LOW)
4. CHoCH Count: Cumulative change of character events with status (CHOPPY/ACTIVE/CLEAN)
5. Liquidity: Active liquidity levels count with status (SWEPT/DENSE/NORMAL)
6. Sweeps: Cumulative sweep count with status (ACTIVE/SOME/NONE)
7. Imbalances: Cumulative imbalance count with status (HIGH/ACTIVE/LOW)
8. POI: Points of interest count with status (ACTIVE/MANY/FEW)
9. Volume: Current volume status (SPIKE/HIGH/NORMAL) with ratio
10. Position: Price position in session range (PREMIUM/DISCOUNT/EQUILIBRIUM) with bias
11. Momentum: RSI-based momentum (OVERBOUGHT/OVERSOLD/NEUTRAL) with value
12. MTF: Multi-timeframe alignment (ALIGNED/DIVERGENT) with strength
These metrics provide complete smart money context at a glance, enabling rapid assessment of market structure, institutional activity, and trade setup quality.
9. Price Position Analysis
The indicator calculates price position within the session range:
Session High = Highest high since session start
Session Low = Lowest low since session start
Session Mid = (Session High + Session Low) / 2
Premium Zone = Price > Session Mid + Range * 0.25 (upper 25% of range)
Discount Zone = Price < Session Mid - Range * 0.25 (lower 25% of range)
Equilibrium = Price between premium and discount zones
Smart money concepts suggest:
- Buy in discount zones (institutions accumulating at favorable prices)
- Sell in premium zones (institutions distributing at favorable prices)
- Avoid equilibrium zones (no clear edge)
The dashboard displays current position and suggested bias (BUY/SELL/WAIT).
Visual Elements
BOS Signals: Triangle shapes (up for bullish, down for bearish) marking break of structure events
CHoCH Signals: Circle shapes marking change of character events
Structure Lines: Lines connecting swing points showing market structure evolution
Liquidity Sweep Lines: Dashed lines from liquidity level to sweep point with "SWEEP" labels
Imbalance Boxes: Semi-transparent boxes highlighting fair value gaps
POI Labels: Small labels marking points of interest
Structure Break Lines: Horizontal lines marking BOS levels with "BRK" labels
Structure Shift Lines: Dashed lines marking CHoCH levels with "SHIFT" labels
Order Block Boxes: Boxes highlighting institutional order zones
Trend Background: Subtle gradient showing current trend direction
Comprehensive Dashboard: 13-row intelligence panel with all smart money metrics
The visual system is designed for clarity - each element has distinct styling to prevent confusion while maintaining professional appearance.
Input Parameters
Core Settings:
Pivot Length: Bars before/after for pivot detection (5-30, default 10)
ATR Length: Period for ATR calculation (10-30, default 14)
Volume Spike Threshold: Multiplier for volume confirmation (1.2-3.0, default 1.8)
Features:
Market Structure (BOS/CHoCH): Toggle structure detection (default enabled)
Liquidity Sweeps: Toggle sweep detection (default enabled)
Price Imbalances: Toggle imbalance zones (default enabled)
Points of Interest: Toggle POI detection (default enabled)
Multi-Timeframe Bias: Toggle MTF analysis (default enabled)
Multi-Timeframe:
Higher Timeframe: HTF for bias analysis (default 60m)
Colors:
All colors are fully customizable including bull primary (neon cyan), bear primary (neon pink), structure break (gold), liquidity sweep (sunset orange), and imbalance zone (neon purple).
How to Use This Indicator
Step 1: Identify Current Market Structure
Check dashboard "TREND" field. BULLISH structure suggests looking for long setups, BEARISH structure suggests short setups. Note the structure status - clean trends show high BOS and low CHoCH counts.
Step 2: Monitor Structure Events
Watch for BOS signals (triangles) confirming trend continuation. These mark optimal trend-following entry points. Watch for CHoCH signals (circles) warning of potential reversals. These suggest reducing positions or preparing for counter-trend trades.
Step 3: Identify Liquidity Sweeps
Liquidity sweep signals (dashed lines with "SWEEP" labels) mark manipulation events. These often provide excellent entry opportunities as institutions have cleared stops and can now move price. Enter in the direction opposite to the sweep (sweep of highs = short setup, sweep of lows = long setup).
Step 4: Use Imbalance Zones
Imbalance boxes mark fair value gaps. Price often returns to fill these zones. Use imbalances as entry zones - buy into bullish imbalances (price returns to gap), sell into bearish imbalances. Unfilled imbalances suggest strong directional conviction.
Step 5: Respect Points of Interest
POI labels mark institutional positioning zones. These often provide support/resistance. Watch for price reactions at POI levels - bounces confirm institutional defense, breaks suggest institutional exit.
Step 6: Assess Price Position
Check dashboard "POSITION" showing PREMIUM/DISCOUNT/EQUILIBRIUM. Smart money concepts suggest buying in discount zones and selling in premium zones. The dashboard provides bias suggestion (BUY/SELL/WAIT).
Step 7: Confirm with MTF Bias
Review "MTF" alignment status. ALIGNED with STRONG rating confirms both timeframes agree on direction. DIVERGENT suggests caution as timeframes conflict. Only take trades when MTF is aligned for highest probability.
Step 8: Validate with Volume
Check "VOLUME" status. Structure breaks and sweeps with SPIKE or HIGH volume are more reliable than those with NORMAL volume. Low volume events often fail.
Best Practices
BOS in trend direction with volume confirmation offers highest-probability continuation trades
CHoCH signals are most reliable when they occur at extreme price positions (premium/discount zones)
Liquidity sweeps at session highs/lows often mark major reversal points
Imbalances that remain unfilled for multiple bars suggest strong directional conviction
POI zones near key structure levels (previous BOS/CHoCH) are most significant
Trade in discount zones for longs, premium zones for shorts for optimal risk/reward
MTF alignment is critical - avoid trades when timeframes diverge
High CHoCH count (>3) suggests choppy conditions - reduce position size or avoid
Clean trends show BOS count > CHoCH count by at least 2:1 ratio
Volume spike confirmation separates genuine institutional moves from retail noise
Multiple sweeps at same level suggest strong institutional interest
Imbalances near structure breaks often get filled before trend continuation
Indicator Limitations
Pivot detection requires sufficient bars before/after - signals lag by pivot length
Structure analysis works best on liquid instruments with clear swing points
Liquidity sweep detection is probabilistic - not all sweeps lead to reversals
Imbalance zones can remain unfilled for extended periods during strong trends
POI detection uses volume which may be unreliable on some instruments
MTF analysis requires data availability on selected higher timeframe
The indicator identifies structure but cannot predict institutional intent
High-frequency trading and algorithmic activity can create false structure signals
News events can override technical structure instantly
Structure breaks can be fakeouts - always use stop losses
The indicator shows what institutions did, not what they will do
Technical Implementation
Built with Pine Script v6 using:
Pivot detection using ta.pivothigh and ta.pivotlow with customizable length
Persistent structure tracking using var variables for trend, highs, lows, and bar indices
Array-based liquidity pool management with dynamic addition/removal
Imbalance detection using gap analysis with ATR-based filtering
Volume spike detection using rolling average comparison
POI identification combining volume and range analysis
Multi-timeframe security request with proper lookahead settings
Price position calculation using session high/low tracking
RSI-based momentum analysis for overbought/oversold context
Comprehensive dashboard with 13 metrics and color-coded status indicators
Dynamic line and box drawing for structure visualization
Label system with size and style variations for different signal types
The code is fully open-source with detailed comments explaining smart money concepts and detection logic.
Originality Statement
This indicator is original in its comprehensive smart money structure analysis. While individual concepts (BOS, CHoCH, liquidity sweeps, imbalances) are established in smart money trading, this indicator is justified because:
It systematically integrates five distinct smart money concepts (structure, sweeps, imbalances, POI, MTF) into a unified detection system
The liquidity pool tracking with dynamic sweep detection provides real-time manipulation identification
Imbalance zone detection with ATR-based filtering ensures only significant gaps are marked
POI detection combines volume and range analysis to identify institutional positioning zones
Price position analysis (premium/discount/equilibrium) provides smart money context for entries
The comprehensive dashboard synthesizes 13 metrics into unified smart money intelligence
Integration of volume confirmation throughout ensures signals reflect genuine institutional activity
MTF bias alignment validates that structure aligns across temporal dimensions
Cumulative event counting (BOS, CHoCH, sweeps, imbalances, POI) enables pattern recognition
The visual system clearly distinguishes between different structure types without clutter
Each component reveals different institutional footprints: BOS shows commitment, CHoCH shows reversal, sweeps show manipulation, imbalances show inefficiency, POI shows positioning, price position shows value zones, MTF shows conviction, and volume confirms participation. The indicator's value lies in combining these complementary perspectives into a cohesive smart money structure analysis system.
Disclaimer
This indicator is provided for educational and informational purposes only. It is not financial advice or a recommendation to buy or sell any financial instrument. Trading involves substantial risk of loss and is not suitable for all investors.
Smart money structure analysis is a tool for understanding institutional footprints, not a crystal ball for predicting future price movement. Structure breaks do not guarantee trend continuation. Liquidity sweeps do not guarantee reversals. Past structure patterns do not guarantee future structure patterns. Market conditions change, and strategies that worked historically may not work in the future.
The metrics displayed are mathematical calculations based on current market data, not predictions of future price movement. BOS, CHoCH, sweeps, imbalances, and POI signals do not guarantee profitable trades. Users must conduct their own analysis and risk assessment before making trading decisions.
Always use proper risk management, including stop losses and position sizing appropriate for your account size and risk tolerance. Never risk more than you can afford to lose. Consider consulting with a qualified financial advisor before making investment decisions.
The author is not responsible for any losses incurred from using this indicator. Users assume full responsibility for all trading decisions made using this tool.
-Made with passion by officialjackofalltrades Indicator
Indicator
Sweep Scan Pro+ [BeNice]Sweep Scan Pro+ – Multi-Asset Liquidity Dashboard
Sweep Scan Pro+ is a professional Liquidity Surveillance Tool designed to track 8 different assets across 3 timeframes simultaneously. It instantly detects institutional liquidity raids, saving you from switching through dozens of charts manually and providing a bird's-eye view of the market.
💎 Key Features
8 Symbols & 3 Timeframes: Monitor up to 8 symbols (e.g., BTC, ETH, SOL) across 3 different timeframes (e.g., 15m, 1h, Daily) from a single master dashboard.
BreakOut vs. Deviation: Identify if price successfully held above a level ( BreakOut ) or just "poked" through to grab liquidity before reversing ( Deviation ). The panel updates in real-time.
Instant Raid Alerts: Receive dynamic notifications the moment any pair "Takes a High" or "Takes a Low," ensuring you never miss a high-probability institutional setup.
Fully Customizable UI: Complete control over table positioning, color schemes, text sizes, and custom labels to fit your personal chart aesthetic.
💡 How to Trade
Dashboard Scan: Identify a Deviation signal on a High Timeframe for your chosen asset on the board.
Verification: Switch to that specific chart to confirm the local reversal structure (SFP).
Execution: Enter trades based on institutional liquidity sweeps with precision and clear technical confirmation. Indicator
Alpaca-trade
V3S-GodMode Synced Strategy คือเครื่องมือ All-in-One สำหรับเทรดเดอร์สาย ICT / SMC (Smart Money Concepts) ที่ออกแบบมาเพื่อการเทรด Gold (XAUUSD) และ Futures โดยเฉพาะ รวบรวมเครื่องมือวิเคราะห์โครงสร้างราคาและเวลา (Time & Price) ที่สำคัญที่สุดไว้ในหน้าจอเดียว พร้อมระบบ Clean Chart ที่ช่วยให้กราฟไม่รก
🚀 Key Features (ฟีเจอร์หลัก):
1. 🏛️ Market Structure & Trend
Trend Filter: กรองเทรนด์หลักด้วย EMA 200 (ปรับแต่งได้)
VWAP: เส้นค่าเฉลี่ยถ่วงน้ำหนักปริมาณการซื้อขาย
Swing Detection: ระบุจุด Swing High/Low อัตโนมัติ (เลือกดูย้อนหลังหรือดูแค่ปัจจุบันได้)
2. ⏰ Time & Sessions
Session Ranges: กล่องแสดงช่วงเวลา Asia, London, และ New York พร้อมเส้นกึ่งกลาง (Mean Threshold)
Daily Levels: เส้นราคาสำคัญประจำวัน (Previous Day High/Low, True Day Open, New Day Open)
Clean Chart Mode: โหมดพิเศษแสดงผลเฉพาะสัปดาห์ปัจจุบัน ช่วยให้โหลดกราฟไวและไม่รกตาย้อนหลัง
3. 🧠 ICT Concepts & Macros
ICT Macro Tracker: ติดตามช่วงเวลา Macro สำคัญ (เช่น 02:50, 09:50) พร้อมเส้นราคาเปิดของช่วงเวลานั้นๆ
Quarterly Theory: เส้นแบ่งช่วงเวลา 90 นาที (Q1-Q4) และ Micro Cycles (23 นาที)
SMT Divergence: ตรวจจับความขัดแย้งของราคากับสินทรัพย์อ้างอิง (เช่น DXY)
4. 💎 Smart Money & Entry Models
Inversion FVG (IFVG): แสดง Fair Value Gaps ที่ถูกทำลายและเปลี่ยนหน้าที่เป็นแนวรับ/ต้าน (Credit: LuxAlgo logic)
CISD (Change in State of Delivery): ระบบแจ้งเตือนจุดกลับตัวเมื่อเกิดการกวาด Liquidity + FVG + Displacement ในช่วง Killzone
5. 🏆 Gold Special Features
Round Numbers: เส้นแนวรับแนวต้านจิตวิทยา (Psychological Levels) สำหรับทองคำ ปรับระยะห่างได้ (เช่น ทุกๆ $5 หรือ $10)
6. 🛠️ Quality of Life
Dashboard & Watermark: แสดงสถานะและชื่อระบบแบบมืออาชีพ
Customizable: ปรับสี เปิด/ปิด ฟีเจอร์ต่างๆ ได้ตามใจชอบผ่านเมนูตั้งค่า
⚠️ Disclaimer: เครื่องมือนี้มีไว้เพื่อช่วยในการวิเคราะห์ทางเทคนิคเท่านั้น ไม่ใช่คำแนะนำทางการเงิน การลงทุนมีความเสี่ยง ผู้ใช้งานควรศึกษาและบริหารความเสี่ยงด้วยตนเอง
-------------------------------------------------------------
Here is the English Version of the description, ready for you to copy and paste into PulseWire! 😎
📝 V3S-GodMode Synced Strategy
Title: V3S-GodMode Synced Strategy
Description:
V3S-GodMode Synced Strategy is an All-in-One trading toolkit designed specifically for ICT / SMC (Smart Money Concepts) traders focusing on Gold (XAUUSD) and Futures markets. It consolidates the most critical Price Action and Time analysis tools into a single, comprehensive indicator, featuring a "Clean Chart Mode" to keep your workspace uncluttered and professional.
🚀 Key Features:
1. 🏛️ Market Structure & Trend
Trend Filter: Filters the primary market direction using a customizable EMA 200.
VWAP: Displays the Volume Weighted Average Price for intraday analysis.
Swing Detection: Automatically identifies Swing Highs and Swing Lows (Toggle available for historical or current data only).
2. ⏰ Time & Sessions
Session Ranges: Visual boxes for Asia, London, and New York sessions, complete with a Mean Threshold (50%) line.
Daily Levels: critical daily price levels, including Previous Day High/Low (PDH/PDL), True Day Open (TDO), and New Day Open (NDO).
Clean Chart Mode: A unique feature that displays data only for the current week, significantly improving chart loading speed and reducing visual noise from historical data.
3. 🧠 ICT Concepts & Macros
ICT Macro Tracker: Tracks essential Macro windows (e.g., 02:50, 09:50) and plots the opening price line for each specific macro period.
Quarterly Theory: Vertical dividers for 90-minute cycles (Q1-Q4) and Micro Cycles (23-minute intervals).
SMT Divergence: Detects divergences between the asset price and a reference asset (e.g., DXY) to spot potential reversals.
4. 💎 Smart Money & Entry Models
Inversion FVG (IFVG): Highlights Fair Value Gaps that have been invalidated and flipped their role to support or resistance (Credit to LuxAlgo logic).
CISD (Change in State of Delivery): An alert system identifying potential reversal points based on Liquidity Sweeps + FVG + Displacement occurring specifically within Killzones.
5. 🏆 Gold Special Features
Round Numbers: Automatic psychological support and resistance lines for Gold, with adjustable increments (e.g., every $5, $10, or custom values).
6. 🛠️ Quality of Life
Dashboard & Watermark: Displays the system status and indicator name with a professional look.
Fully Customizable: Toggle any feature on or off and customize colors to match your personal trading style via the settings menu.
⚠️ Disclaimer: This tool is intended for technical analysis assistance only and does not constitute financial advice. Trading involves significant risk. Users should conduct their own research and manage their risk accordingly. Indicator
