EWCore Docs (Help & Reference)EWCore Docs — On-Chart Help & Reference (companion to EWCore)
EWCore Docs is the documentation companion to the EWCore Elliott Wave indicator. It is one of three scripts published together: EWCore itself, the EWCoreEvaluators library that EWCore imports, and this reference panel. It must be used alongside EWCore — on its own it has nothing to document.
This script performs no price calculation . It draws a single text panel on the chart that carries EWCore's feature list, its full settings manual, and a short Elliott Wave vocabulary primer, so that a user working with EWCore can look something up without leaving the chart.
Why this exists
EWCore is a large indicator with an extensive settings dialog and a long list of named features, and its settings interact: a threshold in the detection stage changes what the scoring stage ever gets to see. Tooltips explain one setting at a time and cannot show that structure. A trader who wants to understand why a count looks the way it does needs the settings laid out in the same order the engine applies them, reachable while the chart is open. That is what this panel does, and it is why the reference lives in a script rather than on a page somewhere else.
How to use it — everything is in the Settings dialog
Add the script to a chart, then open its settings. There are no chart interactions; every input only selects which text is shown.
Group "EWCore Docs — Navigation" — always active:
Show Panel — turns the panel on and off.
Content — the main switch, choosing between the sections below.
Panel Position — anchor points from top left through centre to bottom right.
Panel Text Size — Small, Normal or Large.
Group "Feature List" — active when Content is set to Feature List:
Feature Group — pages through EWCore's features in blocks, from detection and rules through chains, labels and targets to the newer extension and calibration features. Each entry gets a short plain-English description.
Group "Settings Manual" — active when Content is set to Settings Manual. The controls, used in sequence:
Manual Category — the stages of the engine, in the order it applies them:
Detection & Verification — Pivot Detection (ATR-adaptive), Higher-Degree Detection, Pattern Detection, Sub-Wave Verification, Window Discriminator
Context & Anchoring — Count Anchoring, Display Window
Scoring — Scoring Module, Hard-Rule Tolerance, Parent-Timeframe Context Gate, Performance Safety
Visualization — Wave Labels, Historical Chain, Sequel Chain, Gap Raw Count, Pattern Explanation, Lines & Zones, Frame Count, Forward Projection, Fibonacci Target Zones, Table Settings
↳ Section — picks one section within the chosen category. Note that the dialog shows one "↳ Section" row per category; only the row belonging to your current Manual Category is active, the others are greyed out.
Setting # within section — pages through the settings of that section one at a time. Each page shows the setting's exact title, its default value, and its full explanation, reproduced word for word from EWCore's own tooltip.
Group "Elliott Wave Primer" — active when Content is set to Elliott Wave Primer:
Primer Topic — basic structure, the impulse hard rules, corrective pattern types, the degree scale, extensions, alternation, and diagonals. These are the terms the other two sections assume you already know.
What is not covered
Purely cosmetic settings — colors, line styles, label and text sizes — are left out of the manual on purpose. They are self-explanatory in EWCore's own dialog and are described collectively under the Theming feature instead.
What this script does NOT do
It does not plot, measure, or evaluate anything on the chart it is added to, and it produces no signals. It has no input that affects any calculation, because there is no calculation — every input only changes which piece of reference text is displayed. Panel width and height are not adjustable; both follow the fixed line wrapping of the text and the amount of content currently shown. If you are looking for the Elliott Wave counting and labelling itself, that is EWCore, not this script.
This script is a documentation tool. It is not financial advice, and not a technical analysis tool in itself. Indicator
Session Reaction Map [AGPro Series]Session Reaction Map
🔷 OVERVIEW
Session Reaction Map is a premium intraday study that maps how price reacts to the most important daily and weekly reference levels right at the opens of the Asia, London and New York sessions. Each session open is evaluated inside a fixed measurement window, and the resulting reaction is broken down into four dimensions: dominant move, close follow-through, wick rejection and counter-move penalty. The output is a single 0-100 reaction score that is then translated into tier-coded labels, premium reaction zones, an active reference band and a compact status panel, so you can instantly read what happened at each session open without scrolling through candles.
The indicator is designed for discretionary traders, systematic traders, SMC and price action practitioners who want a clean, consistent and quantitative way to read session open behaviour around PDH, PDL, PDM, Daily Open and Weekly Open. Reactions are drawn as directional zones (bull zones above the reference and bear zones below), with up or down pointing labels centered on the reaction, so orientation is always unambiguous.
🧭 UNIQUE EDGE
Most session open tools only mark time windows or highlight levels. Session Reaction Map goes further and quantifies the quality of the reaction itself. Four independent dimensions are measured against a fixed ATR-normalized baseline, and the final score determines not only whether a label is shown but also how prominent it is. Elite scores (80+) get the strongest visuals; strong scores (70-79) get a slightly softer treatment; watch scores (55-69) are coded as caution; anything below 55 is filtered out by default.
This separation between detection (a session open near a reference) and evaluation (the reaction quality score) is the core edge. It lets you focus only on the best intraday reactions and discard noise automatically, while still being able to audit every component by adjusting the ATR length, touch tolerance, evaluation window and score thresholds.
⚙️ METHODOLOGY
Session detection uses the chosen timezone and three session windows (Asia, London, New York), each with its own editable open range. When a session open occurs, the script checks whether the open price is within an ATR based touch tolerance of any enabled reference level (Previous Day High, Previous Day Low, Previous Day Mid, Daily Open or Weekly Open). If so, a reaction window is engaged on that bar and tracked for a configurable number of bars.
During the reaction window, the live zone, reference band and dashed reference line are updated in real time. When the window completes, the final score is computed as:
• Dominant move score (up to 45 points) - scaled against 1.20 x ATR
• Close follow-through score (up to 30 points) - scaled against 0.90 x ATR
• Wick rejection score (up to 15 points) - scaled against 0.50 x ATR
• Counter-move penalty (up to -20 points) - scaled against 1.00 x ATR
The sum is clamped into the 0-100 range and mapped into four tiers: Elite, Strong, Watch and Weak. The dominant direction of the reaction (up or down) is determined by comparing the upside excursion from the reference to the downside excursion from the reference during the window.
🎯 SIGNALS AND VISUALS
• Reaction zones - rectangular areas connecting the reference level with the reaction extreme, tier-coded by score and bias
• Active reference band - a thin accent band around the current reference level during a live reaction window
• Dashed reference line - marks the exact reference price while the reaction is being measured
• Tier-coded labels - up-pointing labels below bullish reactions and down-pointing labels above bearish reactions, centered on the reaction window
• Session dots - small colored markers that optionally display only on valid events, keeping the chart clean
• Active measurement highlight - an ultra-soft background shade on bars inside a live reaction window
Labels use a ring buffer overlap check, so dense multi-session conditions do not pile labels on top of each other. When two labels would visually conflict, the higher-scored reaction wins.
🛠️ KEY INPUTS
Sessions - enable/disable and edit Asia, London and New York session windows, each with its own color and timezone.
Reference Levels - individually toggle PDH, PDL, PDM, Daily Open and Weekly Open.
Reaction Logic - ATR length, touch tolerance in ATR, evaluation bars, label score filter, minimum label score, overlap reduction (bars and vertical ATR gap).
Visuals - show/hide reference levels, session dots, dots only on valid events, reaction zones, minimum score for zones, zone transparency and extension, live reaction zone, active reference band with its ATR size and transparency, active measurement highlight, level width, label size, label offset in ATR and label background transparency.
Panel - show/hide, position (six anchor points), Dark or Light theme, font size, optional guide row.
All numerical inputs carry professional English tooltips explaining their role, so the script can be tuned for any symbol, timeframe and trading style.
📘 HOW TO USE
1. Apply the script on an intraday timeframe. It is designed for intraday use and will stay passive on daily/higher timeframes.
2. Recommended starting timeframe is 4H for swing intraday context, and 1H for tactical intraday work. Lower timeframes (15m, 30m) work too but may produce dense output.
3. Start with the default settings. Observe which sessions and which reference levels generate the most Elite and Strong reactions on your symbol.
4. Use the panel to monitor the current state: last session, last reference, bias, score, tier, label filter, zone filter and the active reaction status.
5. Treat Elite (80+) and Strong (70-79) reactions as the main signals. Watch tier is informative and Weak tier is generally discarded.
6. Align with your own confluence: higher timeframe bias, structure, orderflow, or whatever your primary framework is. The script does not issue buy or sell calls - it scores reactions, and you decide.
⚠️ LIMITATIONS AND TRANSPARENCY
• This is not a strategy and does not place orders. No backtest statistics are implied.
• Reaction scores are computed after the evaluation window completes, so they are not repainting but are confirmed with a lag equal to the evaluation window size.
• The live reaction zone updates during the window and is finalized when the window closes.
• Session behavior varies significantly by symbol (crypto vs FX vs equities) and by volatility regime. Inputs should be tuned per symbol.
• Daily and Weekly references use standard request.security with barmerge.lookahead_off to avoid look-ahead bias.
• The script is not a forecasting tool. It is a post-event quantification of how price has just reacted to a known reference level.
🛡️ RISK DISCLOSURE
Trading involves substantial risk. Past reactions, patterns, zones or scores do not guarantee future performance. This script is provided for educational and analytical purposes only and is not financial advice. Always combine any tool with your own research, a defined risk plan and proper position sizing. You are solely responsible for your trading decisions. Indicator
Reference Price Operating Map [AGPro Series]Reference Price Operating Map
🔹 OVERVIEW
Reference Price Operating Map is a focused overlay that consolidates the four most universally watched reference prices — Daily Open, Weekly Open, Monthly Open, and Previous Close — into a single operating map. It tracks how price interacts with each level in real time, attributes control to the reference currently leading price action, groups overlapping references into confluence clusters, and fades distant context so the active map stays clean.
The chart answers one direct question at a glance: which reference is controlling the session right now.
Built for intraday operators, swing traders, and position traders who anchor their bias to session and period opens. Works on any symbol and any intraday or daily timeframe.
🔸 WHAT MAKES IT DIFFERENT
Most open-line indicators simply draw horizontal lines for Daily, Weekly, Monthly, and Previous Close and stop there. This script goes further by adding four layers on top of those lines:
• State tracking — each reference is classified as Untouched, 1st Touch, Tested, Held, Reclaimed, or Rejected, and the state updates bar by bar as price interacts with the level.
• Control attribution — a proximity-weighted scoring system selects one reference as the current "controller" of price action, highlighted with a dominant-row background in the panel and a thicker line on the chart.
• Confluence grouping — when two or more references sit within 0.5 ATR of each other, they collapse into a single cluster label (for example "D-Open + W-Open + PClose") instead of stacking separate labels on top of each other.
• Distance-aware rendering — references far from current price are demoted to a thin gray zone with a dotted line, keeping them visible as structural context without crowding the active map.
The engine also includes a far-aware state machine: references that price has not meaningfully engaged stay in the Untouched state instead of being forced into misleading classifications.
🔷 METHODOLOGY
Reference levels are pulled directly from the higher timeframe open (Daily, Weekly, Monthly) and the previous daily close using lookahead-safe security calls on confirmed bars.
Distance classification uses ATR(14) as a volatility scale. A reference is considered "near" when price is within a configurable ATR multiple and "far" when it exceeds the far-distance threshold. This adapts the map to both low-volatility ranges and high-volatility expansions without manual tuning.
State transitions are driven by a finite state machine with six states. Key transitions:
• Untouched → 1st Touch when price enters the touch zone (default 0.25 ATR) or wicks through it.
• 1st Touch / Tested → Held when price moves cleanly away from the level on the same side.
• 1st Touch / Tested → Reclaimed when price closes on the opposite side (optionally requiring multi-bar confirmation).
• Any engaged state → Rejected when a large wick rebounds from the level with more than 60 percent wick ratio.
• Held / Rejected → Reclaimed on a confirmed cross.
The control score combines proximity (how close price is to the reference relative to ATR) with a state weight (Reclaimed and 1st Touch score highest, Held scores lowest). The reference with the highest score is tagged as controller; if no reference has meaningful engagement the panel reports No Active Control.
🔶 SIGNALS AND ALERTS
Three alert conditions are exposed:
• Reference Touched — fires the first time any reference is touched in its period.
• Reference Reclaimed — fires when any reference transitions into the Reclaimed state.
• Reference Rejected — fires when a large-wick rejection bar is registered at any reference.
On-chart, first-touch diamond markers are placed on recent bars to make period engagement easy to spot in screenshots and reviews. The panel footer reports the current controller and updates in real time.
🔹 KEY INPUTS
Reference Lines — independent toggles for Daily Open, Weekly Open, Monthly Open, and Previous Close.
Display — Show Active References Only (hide untouched references for a cleaner map), Strict Reclaim Confirmation (require multiple confirmation bars for Reclaim), Label Density (Minimal shows only the dominant reference, Normal shows all active, Detailed appends state names to labels), Show Reaction Bands, Mark First Touches.
Panel — position (four corners), font size, label font size. All default to Normal per AG Pro Series visual standards.
Sensitivity — Touch Threshold (ATR multiple defining a touch), Reclaim Confirm Bars (strict-mode confirmation count), Band Width (reaction band width in ATR), Far Distance (ATR multiple beyond which references are faded to context).
All parameters are ATR-scaled so defaults transfer cleanly across instruments and timeframes.
🔸 HOW TO USE
1. Open the panel and read the controller. If the footer shows "D-Open Controls" with a Bull bias, intraday operators treat Daily Open as the session pivot and trade with that bias until the state changes.
2. Watch the confluence label. A grouped label such as "D-Open + W-Open + PClose" means three references are stacked — a cluster of this kind is typically a higher-conviction zone than a single isolated reference.
3. Use state transitions as triggers. A Rejected state at Monthly Open during a rally is a different signal than a Reclaimed state at the same level. The state tells you what just happened at the level, not just where the level is.
4. Use the far zone as context. A Monthly Open plotted as a gray zone five ATR away from price is not an execution level — it is orientation. When price approaches it, the zone transitions into an active band and the state engine re-engages.
5. Combine with your own structure work. This map is designed to sit underneath price action analysis, order flow, or trend tools, not replace them.
🔷 LIMITATIONS AND TRANSPARENCY
• This is an indicator, not a strategy. No entries, exits, position sizing, or backtesting is performed.
• Reference prices are sourced from higher timeframe candles using confirmed lookahead. Results on intraday charts should match the official Daily, Weekly, and Monthly opens of the exchange the chart is connected to.
• State classifications are heuristic. They describe observed behavior at each level in historical terms and should not be read as forecasts. A Reclaimed state is a description of what just happened, not a prediction of what comes next.
• ATR-based thresholds mean the map adapts to volatility but can feel different on very low-volume or very thinly traded instruments. Adjust the touch threshold and far distance inputs if defaults feel too loose or too tight.
• Confluence grouping uses a 0.5 ATR window. On very wide-range days this window can become large; on very narrow ranges it can feel tight.
🔶 RISK DISCLOSURE
This indicator is provided for informational and educational purposes only. It does not constitute financial advice, investment advice, trading advice, or any other form of advice. Past performance of any level, state, or methodology shown on the chart does not guarantee future results. Trading and investing involve substantial risk of loss. You alone are responsible for your decisions, for managing your risk, and for complying with the laws and regulations that apply to you. Test any tool on a demo account or in paper trading before using it with real capital. Indicator
Fibonacci Retracement MTF/LOGIn Pine Script, there’s always a shorter way to achieve a result. As far as I can see, there isn’t an indicator among the community scripts that can produce Fibonacci Retracement levels (linear and logarithmic) as multiple time frame results based on a reference 🍺 This script, which I developed a long time ago, might serve as a starting point to fill this gap.
OVERVIEW
This indicator is a short and simple script designed to display Fibonacci Retracement levels on the chart according to user preferences, aiming to build the structure of support and resistance.
ORIGINALITY
This script:
Can calculate 'retracement' results from higher time frames.
Can recall previous time frame results using its reference parameter.
Performs calculations based on both linear and logarithmic scales.
Offers optional multipliers and appearance settings to simplify users’ tasks
CONCEPTS
Fibonacci Retracement is a technical analysis tool used to predict potential reversal points in an asset's price after a significant movement. This indicator identifies possible support and resistance levels by measuring price movements between specific points in a trend, using certain ratios derived from the Fibonacci sequence. It is based on impulsive price actions.
MECHANICS
This indicator first identifies the highest and lowest prices in the time frame specified by the user. Next, it determines the priority order of the bars where these prices occurred. Finally, it defines the trend direction. Once the trend direction is determined, the "Retracement" levels are constructed.
FUNCTIONS
The script contains two functions:
f_ret(): Generates levels based on the multiplier parameter.
f_print(): Handles the visualization by drawing the levels on the chart and positioning the labels in alignment with the levels. It utilizes parameters such as ordinate, confirmation, multiplier, and color for customization
NOTES
The starting bar for the time frame entered by the user must exist on the chart. Otherwise, the trend direction cannot be determined correctly, and the levels may be drawn inaccurately. This is also mentioned in the tooltip of the TimeFrame parameter.
I hope it helps everyone. Do not forget to manage your risk. And trade as safely as possible. Best of luck! Indicator
Indicator
Indicator
