Rebound V-BoardRebound V-Board
Multi-timeframe V-Ladder step scoreboard. It runs both Rebound V-Fib engines - RT (long / V-bottom rebound) and Closer (short / inverted-V breakdown) - with support/resistance detection on five timeframes at once and shows how far each timeframe's V-Ladder has progressed, as an on-chart emoji table and as sortable Screener columns. Early steps suggest continuation; late steps warn of the reversal.
Steps are the V-Ladder key levels of the family: hit / 1st / 2nd / 3rd / run on the long ladder (+1..+5), catch / out 1 / out 2 / out 3 / lock on the short ladder (-1..-5), 0 = no ladder yet.
TABLE (top right)
Weather cell - net count of up-expected minus down-expected cells with a sunny / cloudy / rain emoji (within +-1 = cloudy).
Sup%/d - support / resistance slope (linear %/day) of the longest timeframe with a step, RT and CL rows.
One column per timeframe - RT and CL steps as baseball emojis, tinted by expected direction (teal = upside, red = downside).
STATUS LINE
Up-Down - the weather cell's net count (-10..+10).
VL Score A / B (-3..+3) - V-Score-style net readiness over the fast (A-C) and slow (C-E) timeframe triplets, 1:1:1: each ladder's current Fib value through the zone curve (full between hit and 1st, zero by run), long minus short.
PER-TIMEFRAME READOUTS (Data Window + Screener)
For each slot A-E, RT and CL: Step (signed), Age (minutes since the step's level was crossed), Sup% (support / resistance slope, %/day), LFib (current position on the ladder Fib). Plus the representative RT / CL Sup% shown in the table.
INPUTS
Timeframe preset - Swing (15/1H/4H/1D/1W, default), Day trade (5s/15s/1/5/15), or Custom (five Timeframe inputs).
Session (regular / extended / 24h, default 24h) for the analysis timeframes.
Lookback bars and trend detection thresholds - same as Rebound V-Fib RT / Closer.
Calc on every bar - recompute history so the status line follows the cursor (heavy; leave off for live use).
Table position - board anchor (top/middle/bottom x right/left), so two instances (e.g. Swing and Day trade) fit on one chart.
Notes: values update on the last bar and repaint intrabar. Keep the chart on the lowest configured timeframe - a timeframe below the chart's returns only one intrabar per chart bar (fine live, unreliable on history). Pine Screener is limited to 500 bars and 5 request.* calls (this uses all 5); seconds-based timeframes may have no data there.
DISCLAIMER
This script is provided "AS IS" without warranty of any kind. It is for informational purposes only and does not constitute financial advice. Past performance is not indicative of future results. The author is not liable for any losses arising from the use of this script. Trade at your own risk.
Indicator

Rebound V-ScoreRebound V-Score
Scores Rebound V-Fib setups across timeframes. It runs both engines - RT (long / V-bottom rebound) and Closer (short / inverted-V breakdown) - on three selectable timeframes at once (default 1H, daily, weekly) and outputs ranking scores plus per-timeframe readouts for sorting and filtering across symbols. The score is built on the same V-Fib metric (where price sits on the slanted Fib) as the rest of the family. Built for the Pine Screener; no chart drawing, but it also runs on a chart.
For US equities by default. Adjust 'Trading hours per day' for other markets (default 6.5).
Each (direction x timeframe) produces a 0-1 "readiness" - how close that setup is to firing - blended into RT Score and CL Score. Columns are suffixed A / B / C, naming the slot, not the timeframe.
SCORES (sort / filter keys, also on the status line)
RT Score / CL Score (0-3) - long / short readiness across A/B/C. Sort descending for the best long / short candidates.
V-Score (-3..+3) = RT Score - CL Score - net direction. RT/CL are kept separate too, so a timeframe conflict shows as both high.
ENTRY SIGNALS + ALERTS (both directions)
Entry L / Entry S (Any, A, B, C) - long / short trend-entry on a timeframe, gated by the opposite Score (long needs no breakdown, short needs no rebound).
Alerts "Long entry" / "Short entry" (any TF, A, B, C) - one-shot per setup. Use "Once Per Bar Close".
PER-TIMEFRAME READOUTS (Data Window + Screener)
For each of A / B / C: RT/CL V-Fib (position on the slanted Fib), RT/CL Age (bars since firing), V-Trend (RT-CL, %/day). Plus % change 3M / M / W / D (close vs 63 / 21 / 5 / 1 daily bars ago).
INPUTS
Timeframe A / B / C and their Score weights (default 6:3:1, leaning on slot A; normalized, only the ratio matters).
Entry L max CL Score / Entry S max RT Score - the opposite-direction gate for each signal.
Trend / entry thresholds and Score weights (V-Fib zone / trend / lead, default 6:3:1) - same as Rebound V-Fib RT / Closer.
Notes: Pine Screener is limited to 500 bars and 5 unique request.* calls (this uses 4). The score measures readiness, not expected return.
DISCLAIMER
This script is provided "AS IS" without warranty of any kind. It is for informational purposes only and does not constitute financial advice. Past performance is not indicative of future results. The author is not liable for any losses arising from the use of this script. Trade at your own risk.
Indicator

Rebound V-Fib RT CloserRebound V-Fib RT Closer
The price-axis mirror of Rebound V-Fib RT for normal (linear) price charts. It detects an inverted-V peak (run-up then breakdown), draws the slanted V-Fib, resistance line, V-Ladder and baseball closer, marks trend entries, and exposes trend/resistance readouts - fast enough for second-scale charts and the Pine Screener.
For US equities on intraday/daily timeframes. Adjust 'Trading hours per day' for other markets (default 6.5).
Drawing-focused: there is no back-test, technical rating, resistance/exit signal, trailing stop, or lower-timeframe request. Trend geometry and rates update every bar; resistance detection and all drawing run on the last bar. Signals and drawings update on the live bar and confirm at close (they repaint intrabar) - for confirmed-only entry alerts, choose "Once Per Bar Close".
DIFFERENCES FROM Rebound V-Fib RT
Mirrors the whole detection in price: an inverted-V peak instead of a V-bottom, a breakdown leg instead of a rebound, a resistance ceiling instead of a support floor, and Fib targets projected downward
The trend entry is shown as a single entry-bar background tint (red) plus an alert, computed from the live bar's rates / V-Fib / lead
Inputs keep their positive magnitudes; the breakdown direction lives in the comparison signs (breakdown rate is negative, prior run-up rate is positive)
OUTPUTS
Overlay:
Slanted Fib band (multi-colored levels), red breakdown line, purple resistance diagonal
V-Ladder - purple key levels (0.236 / 0.5 / 1.0 / 1.618 / 2.272 / 3.0) between the previous and current resistance
Baseball closer - emoji below the first bar that reached each V-Ladder level
V-Fib Ratio label on the last bar
Entry-bar background tint (red) when a trend entry is marked
Status line + Data Window + Screener:
V-Fib - current V-Fib Ratio (how far price has dropped down the slanted Fib band; the value equals the Fib level number)
V-Trend - net rate (breakdown + run-up), %/day
Sup%/d - resistance slope, %/day
Data Window + Screener:
Age - bars since the current trend entry (0 when not in a setup). Recommended Pine Screener filter: Age 1 ~ 7
SupAge - days since the current resistance line was established
SupLead% - close below resistance, as % of close (negative)
Lead% - leading days x breakdown rate. Negative means price is leading the breakdown below the downtrend baseline
Up%/d, Down%/d - trend slopes, %/day (Up%/d is the active breakdown leg, negative; Down%/d is the prior run-up, positive)
Note: Pine Screener is limited to 500 bars of history; the resistance readouts (SupAge, Sup%/d, SupLead%) are computed on the last bar only.
INPUTS
General:
Lookback bars - inverted-V detection window
Trading hours per day - intraday day-to-bar conversion for the %/day readouts (6.5 = US equities)
Trend detection:
Min run-up bars / Min breakdown bars - minimum bars from bottom to peak / from peak to now
Trend entry:
Min breakdown rate - reject if breakdown slope magnitude is below this (%/day)
Run-up rate limit - constrains the prior run-up; default 0 requires run-up >= 0, more negative requires a steeper run-up
Min V-Trend - reject unless breakdown + run-up rate clears the gate
Min / Max entry V-Fib - lower / upper bound of the entry window on the slanted Fib band
Min entry leading drop - minimum leading drop required at entry
Unlock V-Fib - re-arm the entry once V-Fib drops past this (one signal per setup)
Display:
Show baseball closer - toggle the V-Ladder emoji
Show trend entry - toggle the entry-bar background tint
DISCLAIMER
This script is provided "AS IS" without warranty of any kind. It is for informational purposes only and does not constitute financial advice. Past performance is not indicative of future results. The author is not liable for any losses arising from the use of this script. Trade at your own risk.
Indicator

Rebound V-Fib RTRebound V-Fib RT
A lightweight, real-time variant of Rebound V-Fib for normal (linear) price charts. It draws the slanted V-Fib, support line, V-Ladder and baseball runner, marks trend entries, and exposes trend/support readouts - fast enough for second-scale charts and the Pine Screener.
For US equities on intraday/daily timeframes. Adjust 'Trading hours per day' for other markets (default 6.5).
Drawing-focused: there is no back-test, technical rating, support/exit signal, trailing stop, or lower-timeframe request. Trend geometry and rates update every bar; support detection and all drawing run on the last bar. Signals and drawings update on the live bar and confirm at close (they repaint intrabar) - for confirmed-only entry alerts, choose "Once Per Bar Close".
DIFFERENCES FROM Rebound V-Fib
Adds the V-Ladder (key Fib levels along the support direction) and the baseball runner (emoji marking how far price has run up the ladder)
Trend entry is shown as a single entry-bar background tint plus an alert, computed from the live bar's rates / V-Fib / lead - no back-test, no support entry, no exit, no trailing stop
Detection works before a full Lookback bars of history exists, so it draws on short histories and in Bar Replay
Tuned for real-time use and Pine Screener filtering rather than historical simulation
OUTPUTS
Overlay:
Slanted Fib band (multi-colored levels), blue uptrend line, purple support diagonal
V-Ladder - purple key levels (0.236 / 0.5 / 1.0 / 1.618 / 2.272 / 3.0) between the previous and current support
Baseball runner - emoji above the first bar that reached each V-Ladder level
V-Fib Ratio label on the last bar
Entry-bar background tint (blue) when a trend entry is marked
Status line + Data Window + Screener:
V-Fib - current V-Fib Ratio (position on the slanted Fib band; the value equals the Fib level number)
V-Trend - net rate (Up + Down), %/day
Sup%/d - support slope, %/day
Data Window + Screener:
Age - bars since the current trend entry (0 when not in a setup). Recommended Pine Screener filter: Age 1 ~ 7
SupAge - days since the current support line was established
SupLead% - close above support, as % of close
Lead% - leading days x uptrend rate. Leading days = days the current price is ahead of / behind the uptrend baseline
Up%/d, Down%/d - trend slopes, %/day
Note: Pine Screener is limited to 500 bars of history; the support readouts (SupAge, Sup%/d, SupLead%) are computed on the last bar only.
INPUTS
General:
Lookback bars - V-shape detection window
Trading hours per day - intraday day-to-bar conversion for the %/day readouts (6.5 = US equities)
Trend detection:
Min downtrend bars / Min uptrend bars - minimum bars from top to V-bottom / from V-bottom to now
Trend entry:
Min uptrend rate - reject if uptrend slope is below this (%/day)
Max downtrend rate - reject if downtrend slope exceeds this (typically <= 0)
Min V-Trend - reject if Up + Down rate is below this
Min / Max entry V-Fib - lower / upper bound of the entry window on the slanted Fib band
Min entry leading gain - minimum Lead% required at entry
Unlock V-Fib - re-arm the entry once V-Fib rises past this (one signal per setup)
Display:
Show baseball runner - toggle the V-Ladder emoji
Show trend entry - toggle the entry-bar background tint
DISCLAIMER
This script is provided "AS IS" without warranty of any kind. It is for informational purposes only and does not constitute financial advice. Past performance is not indicative of future results. The author is not liable for any losses arising from the use of this script. Trade at your own risk.
Indicator

Rebound V-Fib LogRebound V-Fib Log
A log-scale variant of Rebound V-Fib. Trend geometry - V-shape detection, slanted Fibonacci levels, support lines - is computed in log price space, so on log-scale charts the bands and trend lines render straight, representing constant %/day rates of change. Intended for log-scale charts only.
For US equities on intraday/daily timeframes. Adjust 'Trading hours per day' for other markets (default 6.5).
The built-in back-test verifies entries and trailing-stop hits on lower-timeframe bars within each chart bar. It ignores slippage, commissions, liquidity and compounding - reference use only.
DIFFERENCES FROM Rebound V-Fib
Trend slopes, Fib levels and support lines are computed in log(price) space
Rate outputs (Up%/d, Down%/d, Sup%/d) use log-space slopes. Numerically interchangeable with the linear version's %/day at typical trend speeds
V-Fib Ratio: position on the slanted Fib band, computed as a log-distance ratio. The value equals the Fib level number - e.g. V-Fib = 0.236 means price is on the 0.236 line (the downtrend's middle top), V-Fib = 1.0 means price is on the 1.0 line
Trail anchored as % of trail high (scales with price), not absolute price width
OUTPUTS
Overlay:
Slanted Fib band (multi-colored levels), blue uptrend line, purple support diagonal - all log-straight on log charts
V-Fib Ratio label on the last bar
Dotted stop guides: blue/purple = active trend/support entry, orange = current support trail
Sub-pane:
Capital - equity curve from the back-test start
LONG label on entry - entry price, rate, V-Fib, lead, trail level, gap %
EXIT label on close - exit price, exit reason (Trail / Trend / V-Fib) and P/L
IF label - last-bar support-entry forecast, shown when V-Fib has overshot the entry window and a pullback-rebound is confirmed
Background color (both panes): blue/purple on entry bars (trend/support), red/gray on close bars (loss/gain).
Status line + Data Window + Screener:
V-Fib - current V-Fib Ratio
V-Trend - net rate (Up + Down), %/day
Sup%/d - support slope, %/day
SupTrail% - max drawdown since support start (floored by Min support trail), used as trail gap
Capital - current equity value
Risk - worst open-trade drawdown across the back-test (<= 0)
Gain/d - average gain per day spent in completed trades
Data Window + Screener:
3M% / M% / W% / D% - change from 3M / 1M / 1W / day close
Age - bars held in the current trade (= days on daily timeframe)
SupAge - days since the current support line was established
SupLead% - close above support, as % of close
Lead% - leading days x uptrend rate. Leading days = days the current price is ahead of / behind the uptrend baseline (positive when above, negative when below)
Up%/d, Down%/d - trend slopes, %/day
Data Window only:
ActiveTrail, SupportTrail - current stop prices
INPUTS
General:
Lookback bars - V-shape detection window
Support last bar only - compute support only on the last bar (faster, disables historical support back-test)
Trading hours per day - intraday day-to-bar conversion (6.5 = US equities)
Trend detection:
Min downtrend bars / Min uptrend bars - minimum bars from top to V-bottom / from V-bottom to now
Min uptrend rate - reject if uptrend slope below this (%/day)
Max downtrend rate - reject if downtrend slope exceeds this (typically <= 0)
Min V-Trend - reject if Up + Down rate is below this
Entry conditions:
Min / Max entry V-Fib ratio - lower / upper bound of the entry window on the slanted Fib band
Min entry leading gain - minimum Lead% required at entry
Max trend trail - cap on the trail gap for trend entries, % of entry price
Min support pullback - V-Fib must drop from its peak by (peak x this ratio) before trough tracking starts
Min support rebound - V-Fib must then rise by this amount from the post-peak trough to arm the support entry
Min support trail - floor on the support trail gap (%)
Max support trail - cap on the trail gap for support entries, % of entry price
Exit conditions:
Only exit by trailing stop - disable the V-Fib-based exit only; rate-based exit and trailing stop remain active
Exit uptrend diff / Keep uptrend rate - rate-based exit fires when uptrend rate falls below both Keep uptrend rate AND (entry rate + Exit uptrend diff). Exit uptrend diff is typically negative
Exit V-Fib ratio - V-Fib-based exit triggers when V-Fib reaches this
Unlock V-Fib ratio - release the trend-entry lock when V-Fib reaches this (should be > Exit V-Fib ratio). The lock is set on each trend entry and is also released by the rate-based exit
Back-test:
Enable backtest - run the simulation
Start capital - starting capital (default 1000)
Capital risk - fraction of capital risked per trade (default 0.2 = 20%). Back-test outputs (Risk, Gain/d, Capital deltas) scale with Start capital x Capital risk
Backtest bars - recent bars included
Min trade bars - hide Gain/d until this many bars have been spent in trades
Display:
Show entry / support entry / exit label - toggle LONG / IF / EXIT
Show labels on capital - place labels on the capital curve instead of by rate value
DISCLAIMER
This script is provided "AS IS" without warranty of any kind. It is for informational purposes only and does not constitute financial advice. Past performance is not indicative of future results. The author is not liable for any losses arising from the use of this script. Trade at your own risk.
Indicator

Indicator

Support Line [by rukich]🟠 OVERVIEW
The indicator displays a floating line that acts as a support level. It's important to remember that any support level can be broken.
🟠 COMPONENTS
The indicator is based on the percentage difference between the closes of the n-th bar back and the current bar. The resulting percentage is smoothed to remove noise.
The indicator is displayed as a green-red line (the colors don’t carry meaning — they are used just for visual variety). When the price touches the support level, the bar background turns green.
For convenience, there is a label on the right side of the indicator showing the current value of the line.
🟠 HOW TO USE
The indicator includes several settings that can be adjusted, though optimal defaults are provided.
Settings:
Timeframe — specifies which timeframe’s data is used to calculate the line.
Candles back — specifies how many bars back from the current one are used.
The indicator should be used according to general support-zone logic. Since no support zone guarantees a price bounce, the optimal approach is to confirm the reaction after the price touches the line.
Example of use:
In the current example, the Timeframe in the indicator settings is set to 1 hour, and the currently open chart is 5 minutes. This means that on the 5-minute chart we see a 1-hour line. After the price touches the support line, you need to see a confirmation of the reaction to understand whether the support zone is holding the price.
In the examples, reaction confirmation is shown through: the formation of an M5 shift and the invalidation of an FVG M5- (the latter is more risky than the M5 shift):
🟠 CONCLUSION
The indicator shows a floating support zone, and when tested, you should confirm the reaction on a lower timeframe. Indicator

Deviations from ARL (DARL)Similar to Bollinger Bands, this indicator uses standard deviations but from Adaptive Rebound Lines (See: 'ARL').
The adaptiveness of the 'ARL' is further affected by volatility and helps greatly in spotting the possible strength and direction of rebounds.
All this information is presented with minimal lag thanks to the rebound qualities of the 'ARL' adapting to market volatility.
----- HOW TO USE IT -----
1) Use with 1h time frame.
2) Smaller width typically means that price will be moving is smaller movements.
3) Small price movements while the width is increasing typically means that a large price move will occur soon.
4) Larger width typically means that price will be moving in larger movements.
5) Very large width with sideways price typically means that the price will have a bias towards the center.
Note: A V-Offset of 1 is also a good setting alternative for this indicator.
----- HOW THIS INDICATOR IS ORIGINAL; WHAT IT DOES AND HOW IT DOES IT -----
This indicator has an original, unique ability in anticipating the strength and direction of a price rebound while at the same time showing the bias of the rebound with minimal lag.
It does this by letting the adaptive qualities of the 'ARL' be affected by market volatility, not just by price movement alone.
----- VERSION -----
This indicator is not a variation, replacement, or presentation of the 'ARL' or the 'ARL' Bands -- it merely derives its base calculations for standard deviations from the 'ARL'.
However, this indicator affects the calculations of the standard 'ARL' with volatility and creates a new, unique calculation.
It thus presents a totally different context for price action.
A standard 'ARL' helps in finding possible rebounds but it does not help in finding the strength of them or the directional bias of a rebound.
This is because a standard 'ARL' is more negligent of market volatility and adapts to price movement alone.
In contrast, this indicator does help in anticipating the strength and direction of the rebound because it adapts deviations from an 'ARL' to market volatility.
Therefore, the lines cannot be adjusted individually but in pairs and only further from their respective, mirroring lines. Indicator
