Prop Key Levels & Order Blocks - Buy Sell Signals with TP/SLA complete intraday trading suite built around one idea: the decision candle.
Instead of guessing where price might turn, the script marks the exact candles
where the market already made a decision, and then tells you what happened when
price came back to them.
Everything is evaluated on closed bars. Printed signals never move.
━━ WHAT IT DRAWS ━━
MAJOR KEY DETECTION
The origin candle of an impulsive displacement leg. Its body becomes a level
that extends to the right. Green for bullish decisions, red for bearish ones.
When price closes clean through a key, the level is greyed out — it failed, and
you can see that it failed. The detection level (1–100) sets how far price must
travel out of a candidate before it is accepted, so you can go from "every small
turn" to "only the moves that really expanded".
MAJOR ORDER BLOCKS
The last opposing candle before a structural break. Drawn as a box that survives
until price closes through it.
TREND DETECTION
A volatility-scaled trailing line under price, green while bullish and red while
bearish. It is the filter one of the two entry engines uses, and a weighted
component of the other.
ORDER POOL
Price levels that were rejected repeatedly and still hold unfilled resting
orders. Each pool is parked as an arrow at the right edge of the chart. You
decide what happens once price trades through one: remove it (the orders are
spent) or keep it dimmed, so you can still trade the reaction after the sweep.
SMART FVGS
Three-candle imbalances, filtered by a minimum size so the chart is not buried
under meaningless micro-gaps.
━━ THE ENTRY ENGINE ━━
Two independent algorithms, selectable in the settings.
PROP MODE — conservative. A signal needs the trend filter, a key level or order
block, and a confirmation candle to agree, and price must not already be
extended. Fewer trades, built for accounts where a handful of clean entries
beats constant activity.
AI-MODE — adaptive. Trend, momentum, key level, order block, pool sweep, fair
value gap and candle quality each contribute a weighted score. The engine fires
when the combined score clears a threshold you control, so it also takes the
reversals the conservative mode filters away.
Every entry comes with three take profits (Minor, Major, Highest) and a stop.
All four are expressed in volatility units — one unit is the ATR at the signal
bar — so the distances breathe with the market instead of being a fixed point
value that is wrong on half the days.
The reward box, the risk box and the projection line are drawn forward from the
entry, so one glance tells you whether the trade is worth taking. Hover any
signal badge to read why it fired and every price it produced.
━━ COOLDOWN ━━
After a signal, the engine mutes itself for a configurable number of bars. This
is what stops it from firing ten entries into the same move — the single
fastest way to run into a daily loss limit.
━━ DASHBOARDS ━━
A trade metrics table in the corner lists the live entry, all three targets, the
stop, the reward-to-risk and the cooldown state — the numbers you copy into your
order ticket.
A cockpit panel shows the live checklist (trend, key level, order block, pool
sweep, candle, cooldown), the running position, and a hit count across the whole
loaded history: how often each target was reached and how often the stop came
first.
━━ ALERTS ━━
Entry, take-profit hit and stop hit, as readable text or as a JSON object
carrying side, entry, all three targets, the stop and the reward-to-risk — the
format execution bridges expect.
━━ SETTINGS ━━
① Engine Control — strategy type, score threshold, cooldown, metrics table
② Trade Config — Minor / Major / Highest TP, SL, volatility unit
③ Insight Matrix — key detection and its level, order blocks, trend
④ Orderflow & Smart FVGs — order pool, touch count, tolerance, fill handling
⑤ Visuals — theme, candle colouring, boxes, price lines, panel, drawing budget
⑥ Alerts — what to fire and in which format
Every input carries a tooltip explaining what it does and what changes when you
move it.
━━ NOTES ━━
Designed for intraday work on index CFDs, gold and FX. The defaults were set up
on 1- to 15-minute charts; on higher timeframes raise the cooldown and the key
detection level.
This is an analysis tool, not financial advice. Past behaviour of any level or
signal says nothing about future results. Test any configuration on your own
instrument and timeframe before trading it. Indicator
Strategy
Indicator
Prop Firm Consistency Tracker [XWiseTrade]Prop firm consistency rules kill more funded accounts than drawdown limits do - and most traders only find out AFTER they breach one. This tool puts your consistency status ON the chart, live, so you know when to stop trading BEFORE you break the rule.
WHAT IT DOES
Most prop firms (FundedNext, Apex, FundingPips and others) require that no single trading day contributes more than a fixed share (commonly 30-40%) of your total profit. This indicator tracks, in real time:
- Today's P&L share of your total profit, measured against your firm's cap
- Room left today: the exact dollar amount you can still make today before breaching
- Live open-position P&L: enter your position side, entry and size, and the tracker updates tick by tick - your consistency status moves WITH the market, not after you close
- A dashboard with SAFE / WARNING / VIOLATED status, and alerts for both thresholds
- Clean by design: no extra pane, no clutter - a single dashboard on your chart, background flashes only when you approach or breach the rule
WHY THIS IS ORIGINAL
Existing consistency tools are one-shot calculators: you type numbers in, they print a static answer. This tracker is different in two ways. First, it runs continuously on the chart and includes your OPEN position's unrealized P&L in the consistency math, so the "room left today" figure updates in real time as price moves. Second, it solves the forward equation: because every dollar you make today also grows your total, the true breach point is (cap x total - today) / (1 - cap), not a naive percentage of your current total. The tool computes this correctly and turns it into one actionable number - how many more dollars today is safe.
HOW TO USE
1. Set your total profit before today, and your firm's consistency cap (FundedNext Rapid: 40%, Apex: 30% - check your own firm's rules).
2. Update "Realized P&L today" as you close trades.
3. Optional: enter your open position (side / entry / contracts / point value) for live tracking.
4. Set alerts on "Consistency warning" and "Consistency VIOLATED".
Works on any symbol and timeframe; the math is account-level, the chart is just your cockpit.
This tool does not access your broker account - inputs are manual by design, which keeps it compliant with PulseWire rules and your firm's terms. It is a risk-management aid, not financial advice. Indicator
Risk Manager & Position Sizer [martineye15]Prop Firm Risk Manager & Position Sizer — a position-size calculator and rule checker built for funded-account and challenge traders. Place your entry, stop-loss and take-profit on the chart, and the panel returns the exact lot size for your chosen risk, then checks that trade against your prop-firm rules before you take it.
THE CORE IDEA: RISK IS FIXED, LOT SIZE FLOATS
Risk money = account size x risk % (or a fixed cash amount). Lot size = risk money / (stop distance x value per lot + commission). Widening the stop shrinks the position; tightening it grows the position. The money at risk never changes. Sizes are rounded DOWN to your broker's lot step, so actual risk never exceeds planned risk.
TRADE LEVELS
Entry, stop-loss and take-profit are interactive price inputs — click to place them when you add the indicator, then drag the price lines to re-plan and watch every number update live. Entry can follow the current price (market) or sit at a placed level (pending). Direction is derived from the stop's side of entry, or forced long/short to validate your geometry. Optionally, an ATR module sets the stop and target automatically at entry -/+ ATR x multiplier, using the chart timeframe or a higher one, and either the live or the last closed bar's ATR.
ACCOUNT & INSTRUMENT
Set your account size, account currency and risk (percent of account or a fixed cash amount). If the symbol's quote currency differs from your account currency, a conversion rate is fetched automatically (direct pair first, then inverse) and a warning appears if neither resolves. Broker specs are fully adjustable: contract size (auto-derived or manual, for the many CFD symbols whose specs differ from the exchange's), lot step, minimum and maximum lot, and round-trip commission per lot, which is treated as part of the loss. A manual lot override works in reverse: enter a size you already have in mind and the panel tells you the risk money and risk percentage it actually carries.
PROP-FIRM RULE ENGINE
Enter your firm's limits — maximum daily loss, maximum total drawdown, per-trade risk cap, maximum lots, maximum portfolio open risk, and profit target (typical challenge rules are 5% daily, 10% total, 10% target). Log how much you have already lost today and your running P/L, and the panel shows:
- Remaining daily loss budget, and whether this trade fits inside it
- How many identical losing trades it would take to breach the daily limit
- Remaining total drawdown buffer, reduced by any running loss
- Pass/fail on the per-trade risk cap, the lot cap, and combined open risk across positions
- Distance to your profit target, in money and in R multiples of this trade's risk
- A minimum risk:reward check
With hard block enabled, any failed check turns the panel header red and shows DO NOT TRADE.
PANEL, DRAWINGS & ALERTS
A dashboard table (four corner positions, normal or compact, dark or light) shows direction, levels, lot size, units, risk and reward in money and percent, risk:reward, per-pip value for the sized position, every rule check, and a plain-language warnings list explaining anything that is wrong or clamped. Entry, stop and target are drawn as labelled lines with shaded risk and reward zones. Alerts are available for entry, stop or target touches — with the computed lot size and risk in the message — and for any rule check flipping to fail.
HOW TO USE
Add the indicator, click to place entry, stop and target. Set your account size, currency and risk percentage, then enter your broker's contract size, lot step and commission (check these against your own account — CFD specs vary between brokers). Enter your firm's daily loss, drawdown, target and cap rules once. Before each trade, drag the levels to your plan, update the loss-taken-today and current P/L fields, read the lot size, and only take the trade if every check passes.
WHAT MAKES IT DIFFERENT
Most position sizers stop at the lot size. This one continues into the rules that actually end funded accounts: it treats the daily loss budget, the drawdown buffer and total open risk as constraints the trade must fit inside, tells you how many more losses you can survive today, expresses your remaining profit target in R multiples of the position in front of you, and can visibly block the trade when a rule fails. Commission is priced into the size, results are rounded conservatively, and every clamp or failure is explained in plain language rather than silently applied.
IMPORTANT LIMITATIONS — PLEASE READ
Pine Script cannot access your broker account. Account size, loss already taken today, current P/L and risk committed to other open positions are MANUAL inputs — the tool is only as accurate as what you enter, so keep them current during the session. It cannot read your live balance, equity, open positions, spread, swap or margin, and it cannot place, modify or close orders — this is a calculator and a checklist, not an execution tool. PulseWire's symbol specifications may not match your prop firm's CFD specifications, which is what the manual contract size override is for: verify the lot size against your broker before trading. The total drawdown check assumes a static limit measured from the initial balance and does not model trailing drawdown. Figures update live with the current bar (ATR in "Current" mode changes as the bar forms); use the "Previous" ATR setting for stable values.
This is a calculation and decision-support tool. It is not a strategy, generates no trade signals, and is not financial advice. Always verify position sizes against your own broker and risk rules. Indicator
Strong Prop Challenge Sim | ProjectSyndicateStrong Challenge Sim answers the one question every prop-firm trader pays to find out the hard way: with the edge you actually have, what are the odds you pass — and what kills you when you don't. Instead of a single pass/fail formula, it runs thousands of complete evaluations trade-by-trade and day-by-day, enforcing your firm's real rule set the way the firm enforces it: profit target, daily loss limit, maximum drawdown, minimum days, deadline, and consistency. Every simulated run is counted into exactly one outcome — passed, killed by the daily limit, killed by max drawdown, voided by the consistency rule, or out of time — so the buckets always sum to 100% and no losing run is hidden. The result is drawn as real equity curves on a real balance axis in its own pane, ranked on a two-panel dashboard, priced out in expected value, and audited against a pre-flight checklist — so you can see how the challenge behaves on your numbers before you pay a fee.
🎲 Monte-Carlo Core — the core idea, expressed as a lifecycle: EDGE ▸ TRADES ▸ DAYS ▸ RULES ▸ VERDICT. Your edge is defined per trade — win rate, reward:risk, average loss in R, risk basis and size, trades per day. The engine plays that edge forward one trade at a time, accumulates each day, and after every single trade it checks the rule stack in the same order a firm's risk system does: has equity touched the maximum-drawdown floor, has the day's loss breached the daily limit, has the profit target been reached, and have the minimum trading days been served. The drawdown floor itself is modelled three ways — Static from your starting balance, Trailing from the equity peak, or Trailing → locks once the floor reaches your starting balance — because that single rule changes the answer more than almost anything else. Phase 1, Phase 2, or both back-to-back. A deterministic seed makes every result reproducible; change it to draw a different sample.
📈 Equity Simulator — the whole point is to watch the runs, so the indicator lives in its own pane on a true balance axis rather than fighting your price scale. Up to eight complete simulated challenges are drawn as full equity curves, stretched across an adjustable width, each coloured by how it actually ended: green passed, orange died on the daily loss limit, red blew the maximum drawdown, blue passed the target but was voided by the consistency rule, grey ran out of time. Every curve prints its ending balance and outcome at its right edge, and the Target, Start, and Max-DD reference lines are labelled with their real money values — so you read the balances directly instead of guessing at the scale.
🧮 Edge Analytics — the deterministic maths behind the simulation, stated plainly: expectancy per trade in R and as a percentage of equity, theoretical profit factor, break-even win rate, your margin above or below it, the Kelly-optimal risk with a verdict on the risk you actually chose (conservative / aggressive / OVER-BET), and the estimated number of trades to reach target alongside the average the simulation really needed. If the edge is negative, this is where it shows up first — no number of simulations fixes maths that doesn't work.
⚙️ Execution Reality — the section most calculators pretend doesn't exist, and the reason backtests flatter you. Two costs are modelled explicitly. Spread and slippage are charged on every single trade in R, shrinking every winner and deepening every loser, because clean mid-price backtesting overstates performance. Execution Rate captures the gap between the strategy and the operator: the share of setups you actually take by the rules, with the remainder taken as marginal, late, off-rule entries at a degraded win rate. The panel then shows your Backtest WR → Real WR and the exact R your edge loses to costs and execution. Improving execution is frequently worth more than optimising the strategy.
🧠 Loss-Streak Anchor — the psychological instrument. The engine records the longest run of consecutive losers in every simulation and reports the typical and worst streak you should expect, then converts the worst one into what it actually costs as a percentage of your account. This is the number that stops you revenge-trading on loss four when your own data says six is normal — and it is also a hard risk test: if your worst plausible streak costs more than the maximum drawdown, the challenge is unsurvivable at that risk size no matter how good the headline pass probability looks.
💰 Challenge Economics — a challenge is a purchase, so it gets priced like one. Enter the fee, whether it's refunded on first payout, your profit split, the profit you expect per payout cycle, and how many cycles you realistically expect to collect. The panel returns the expected number of attempts to pass, the total fees you should expect to spend getting there, your expected payouts, the net expected value of the whole venture, and the ROI on fees — flagged +EV or −EV. A 99% pass probability and a −EV verdict can coexist; this is where you find out.
📅 Profit Calendar — a day-by-day heat map of one sample run, up to thirty trading days, green for up days and red for down days with the intensity scaled to the size of the move and the P/L printed in each cell, plus that run's final outcome. It turns an abstract probability into a story you can read: where the drawdown hit, which day carried the account, and whether one outsized day is quietly setting up a consistency-rule violation.
⚖️ Rule-Profile Comparison — your identical edge run against six different rule sets side by side, showing target, daily limit, maximum drawdown and the resulting pass probability, with your own rules marked. Profiles are labelled by their actual numbers and drawdown type rather than by brand, because firm terms change and the rules are what the maths responds to. The same trader can be comfortably profitable under one rule set and mathematically doomed under another — this makes that visible before you choose.
🔥 Sensitivity Grid — an optional 5×5 heat grid re-running the simulation across a range of win rates and reward:risk ratios around your inputs, colour-graded by pass probability with your base case marked. It shows how fragile or robust your pass odds are: whether you sit on a plateau where a small slip still passes, or on a cliff edge where two points of win rate is the difference between funded and refunded.
✅ Readiness Checklist — the pre-flight audit, scored out of eight, every box ✓ before you pay: the edge is positive after costs, the sample behind your numbers is at least 100 trades, risk sits at or below half-Kelly, pass probability clears 50%, the worst loss streak is survivable inside the maximum drawdown, spread and slippage are actually modelled, execution rate is at least 85%, and the average drawdown per run stays inside the limit. Each item shows the value it was judged on, so a ✗ tells you exactly what to fix.
📊 Two-Panel Dashboard — the read-out is split into two panels so it fits on a normal screen. Panel A — Results carries the verdict with a pass-probability bar and a plain-language rating, the full failure breakdown by cause, time to pass as median / fastest 10% / average / slowest 10% with the average ending balance and net P/L, the loss-streak anchor, day extremes (average up day, average down day, gain/loss ratio, best and worst day), and your setup summary. Panel B — Edge & Economics carries edge analytics, execution reality, challenge economics, and the readiness checklist. Both panels, the calendar, the comparison and the grid can each be placed in any of nine screen slots at three text sizes, so nothing overlaps whatever else you run.
🎚️ Discipline & Behaviour Controls — rules you impose on yourself, tested rather than assumed. A daily profit lock stops the day after +X R; a circuit breaker stops it after −Y R. Tilt / revenge sizing models the classic killer: after a chosen number of consecutive losses, risk is multiplied — switch it on and watch the daily-loss failure rate climb. The consistency rule caps how much of total profit a single day may carry and voids passes that breach it, exactly as firms do. Variable R randomises win and loss sizes around your averages for extra realism.
🔔 Alerts — fires on a positive edge (expectancy above 0R after costs) and on a negative edge, the latter being the one that matters: it means the challenge maths does not work at your current inputs, regardless of how the curves happen to look.
🔧 Fully Customizable — every component is exposed: account size, currency symbol and phase; both profit targets, daily and maximum drawdown, drawdown type, minimum days, deadline, and the consistency rule with its threshold; win rate, reward:risk, average loss in R, risk basis (current equity / starting balance / fixed amount), risk size, trades per day, and the sample size behind your numbers; spread and slippage in R, execution rate, off-rule win rate, and tilt with its trigger and multiplier; the profit lock and circuit breaker; fee, refund, split, payout percentage and payout count; simulation count, seed, and R randomisation; curve count, curve width, reference lines and balance labels; and every panel, module, position and text size.
🎯 Why this is different — a pass-probability calculator gives you one number from a formula and stops. This runs the entire evaluation thousands of times under the firm's real rule stack, tells you not just whether you pass but precisely what kills you when you don't, charges you for spread and for the trades you don't take properly, hands you the loss streak you must be able to sit through, prices the attempt in expected value rather than hope, checks your readiness against eight objective boxes, and draws the whole thing as honest equity curves where every stop-out is counted. It is built to talk you out of a bad challenge, not into one.
🚀 Where to use it — the simulator is symbol- and timeframe-agnostic: it models your trading edge and your firm's rules, not the chart it sits on, so you can leave it on any instrument on any timeframe and the answer is the same. Load the chart you actually intend to trade for context, feed it the win rate and reward:risk from your own backtest or journal on that market, and set the rule inputs to your specific target firm — different firms' rules produce materially different answers from the identical edge.
🎯 How to use it
Enter your firm's rules exactly — target, daily limit, maximum drawdown, and above all the correct drawdown type, since Static, Trailing and Trailing → Lock are not interchangeable.
Enter your real edge from a real sample — win rate, reward:risk, average loss in R, risk per trade and trades per day — and set the sample size honestly. Under 100 trades, the checklist will flag your numbers as statistically meaningless, and it is right.
Set the execution reality before you believe anything — put your true spread and slippage in R, and set your execution rate to what you actually achieve, not what you intend. Watch Backtest WR → Real WR.
Read the verdict, then read why runs fail — the failure breakdown tells you what to fix. Daily-limit failures mean size or tilt; max-drawdown failures mean the edge or the risk; timeouts mean the target is out of reach in the time allowed.
Check the loss-streak anchor and the checklist before the pass probability — a 99% pass probability with an unsurvivable worst streak is a tail risk, not a green light.
Price it in Panel B — if the net expected value is negative, the challenge is a bad purchase however good the odds look.
Tune risk with the Kelly verdict and the sensitivity grid, and re-check the calendar for consistency-rule exposure if your firm enforces one.
⚠️ Important — this is a planning and decision-support tool, not a trading system, and it makes no performance guarantees. Every output is a probabilistic estimate derived entirely from the inputs you provide: the simulation cannot know your real edge, and garbage in is garbage out with three decimal places. Real markets are not independent coin flips — they cluster, trend, gap and change regime, while the model assumes each trade is an independent draw from your stated win rate, so treat the results as the mathematical shape of your challenge rather than a forecast of it. Pass probability is the headline and the least useful number on its own; weigh it against the failure breakdown, the loss-streak anchor, average drawdown and expected value. Rule sets vary between firms and change over time — verify every rule against your firm's current terms, particularly the drawdown type and any consistency requirement. No simulation, however honest, is a substitute for a tested edge and your own risk management. Indicator
Trailing Drawdown Line Futures PropFirmsSee the exact price where your trailing drawdown gets hit — before it happens.
Built for futures prop-firm traders (Apex, Topstep, MyFundedFutures, Tradeify, BluSky and similar). Enter your firm's trailing DD size, your buffer at entry and your contract count, then click your entry point on the chart. The indicator draws your liquidation line — the price where the account would breach the trailing max drawdown — and ratchets it the way the firm actually does: it trails the implied equity peak at the FULL drawdown distance, and if you enter below your prior peak the line starts closer but does not move until price beats that peak.
Features
• Works on any futures symbol automatically — the contract's point value is read from the symbol (ES, NQ, MNQ, MES, GC, CL, ZB, …). Non-USD contracts (e.g. FDAX) display in their quote currency.
• Three trailing models: Intraday (trails every new high/low — real-time-trailing firms), Bar close, and End of day (EOD-trailing firms; needs an intraday or 1D chart).
• Live buffer readout — dollars and points left before the line — in a dark info table and an on-chart label.
• Breach is latched: once the line is touched the status stays BREACHED, because a trailing max-DD hit is terminal, not a temporary state. On historical bars the intraday model errs toward flagging (the path inside a bar is unknowable) — confirm on a lower timeframe.
• Lock support: enter the price where your firm freezes the DD (breakeven lock), or let the script derive it from your start balance + equity at entry. Status flips to LOCKED.
• Exit time: set it when you close the trade — the line and buffer freeze, because real DD levels stop moving while you're flat.
• Two alert conditions: buffer below warning level, and line touched.
How to use: add to chart → click your entry point → set contracts, firm DD size and buffer at entry (from your firm dashboard) → pick the trailing model that matches your firm → optionally create the two alerts. Re-anchor for every new trade.
Honest limitations: models ONE fixed-size position on THIS symbol. Scaling in/out or holding other instruments changes your real equity path and is not modeled. Anchor on a low timeframe (1–5 min) for precision. Educational risk-visualization tool — always confirm your firm's exact drawdown rule on their own site. Indicator
Prop Firm Risk Guard I EonMetrics Prop Firm Risk Guard
Prop Firm Risk Guard is a risk dashboard and position size calculator for prop firm challenge and funded-account traders. It keeps the numbers that decide whether your account survives — the Daily Loss Limit, the Max Drawdown floor and the size of your next trade — on one screen, derived from one shared account state.
Stated plainly up front: PulseWire cannot see your broker account. Your balance and today's P&L are MANUAL inputs — you type them in, the script does the limit math and the sizing math. Entry, Stop and Take Profit are also yours: the script never calculates or suggests any of them, it only draws the levels you decided on and does the arithmetic. The only live, price-driven element is the Entry/SL/TP lines and their cross alerts. No signals, no trade suggestions.
🔶 WHY ONE SCRIPT
A challenge usually fails through one compounding mistake: a trade sized without checking how much of today's loss allowance is actually left, so a routine stop-out becomes a daily breach. That check only works when the daily limit, the drawdown floor and the position size are computed from the same account state at the same moment — which is why they are one dashboard instead of separate tools you would have to cross-reference by hand. The last sizing row makes the link explicit: it compares one full stop-out against your remaining daily room and turns red BEFORE the trade if it doesn't fit.
🔶 WHAT IT DOES
Daily Loss Limit — enter your firm's daily loss % and its basis (starting or current balance). Today's P&L is a NET number, wins offset losses. Because firms word this rule two ways, both models are supported: Floor (the day has a fixed equity floor, so intraday profit adds room before it — the common model) and Hard Cap (the allowed loss is fixed, profit does not extend it). The table shows the remaining allowance in money and a status ladder: OK → CAUTION (50% used) → DANGER (80%) → BREACHED.
Max Drawdown — Static (floor fixed below the starting balance) or Trailing (floor follows the equity high-water mark). Shows the floor as an actual money level and the buffer above it, with the same status ladder.
Position sizing — risk per trade as % of balance or a fixed amount, planned entry (or live price) and stop. Returns the size in units, the forex conversion to 100k lots and the notional value. A Contract Multiplier input keeps the math correct on futures (e.g. ES = 50, GC = 100) as well as stocks, crypto and forex.
Take Profit (optional) — add your own TP price to see the R:R ratio and the money gain if it hits, using the same calculated size. If the TP sits on the wrong side of entry for your direction, the cell flags it instead of showing a meaningless ratio.
Entry / SL / TP lines — your levels drawn on the chart, with three alert conditions that fire when price crosses any of them.
🔶 HOW TO USE
1. Settings → Account: starting balance, current balance; high-water mark for trailing-drawdown firms (0 = auto).
2. Prop Firm Rules: copy the exact numbers and models from your firm's dashboard.
3. During the session, keep Today's P&L updated — the daily section only knows what you tell it.
4. Before a trade: set risk, entry and stop; read the size; make sure the last row is not red.
5. Optional: add a TP for R:R, and set alerts on the three price-cross conditions.
🔶 SETTINGS
Account (balances, high-water mark) · Prop Firm Rules (daily loss % + basis + Floor/Hard Cap, max drawdown % + Static/Trailing, profit target) · Today's P&L · Position Sizing (risk mode, entry/stop/TP, contract multiplier, lines toggle) · Table (position, text size).
This tool does the arithmetic of your firm's rules and your own trade plan. It does not know your account, does not predict anything and does not tell you what to trade.
Part of the EonMetrics toolset.
Indicator
Indicator
Cody Zig Zag Cody Zig Zag – MT4-Style Zig Zag for PulseWire
The ZigZag indicator that actually works like the classic MT4 version!
🔍 Overview
Cody Zig Zag is a powerful, fully customizable ZigZag indicator that replicates the exact behavior of the popular MetaTrader 4 (MT4) ZigZag. Unlike PulseWire's built-in ZigZag, this version behaves identically to what MT4 traders know and love – making it perfect for Elliott Wave traders, support/resistance hunters, and breakout specialists.
⚙️ Input Parameters (Just like MT4!)
Parameter Default Description
Depth 12 Minimum number of bars between swing points
Deviation 5 Minimum price movement (in ticks) to form a new swing
Backstep 2 Minimum bars between swing points of the same type
Line Thickness 2 Visual weight of the ZigZag line
Bull Color Lime Color for upward swings
Bear Color Red Color for downward swings
Repaint Levels True Enables real-time repainting (MT4 style)
🎯 Key Features
✅ TRUE MT4 BEHAVIOR – Exact replication of MetaTrader 4's classic ZigZag algorithm
✅ INTELLIGENT LABELS – Automatically identifies HH (Higher High), LH (Lower High), LL (Lower Low), and HL (Higher Low)
✅ REAL-TIME UPDATES – Optional repainting mode for live market analysis
✅ DIRECTION BACKGROUND – Visual market direction indicator (Green = Bullish, Red = Bearish)
✅ ALERT CONDITIONS – Get notified when the ZigZag direction changes
💡 How to Use
For Beginners:
Just add the indicator to your chart – the default settings (12,5,2) work perfectly for most timeframes!
For Advanced Traders:
Lower Depth (5-8) → More swings, more detail (scalping/1min charts)
Higher Depth (12-20) → Cleaner swings, fewer signals (swing trading/4H+ charts)
Adjust Deviation → Control minimum swing size based on volatility
🎨 Visual Guide
Lime Line = Price moving UP
Red Line = Price moving DOWN
HH Label = Higher High (uptrend continuation)
LH Label = Lower High (potential reversal down)
LL Label = Lower Low (downtrend continuation)
HL Label = Higher Low (potential reversal up)
📊 Best For
📌 Elliott Wave Counting – Perfect for identifying wave structure
📌 Support & Resistance – Automatically marks swing highs/lows
📌 Breakout Trading – Visualize clear break levels
📌 Divergence Trading – Spot hidden/regular divergences with RSI/MACD
📌 Harmonic Patterns – Identify XABCD patterns easily
⏰ Alert Conditions
Direction Changed – Triggered whenever the ZigZag changes direction
Bullish Direction – When price starts moving up
Bearish Direction – When price starts moving down
🔧 Troubleshooting
Q: Why does the indicator "repaint"?
A: That's how MT4 ZigZag works! Repainting shows the most accurate real-time swing points. Turn OFF "Repaint Levels" if you prefer traditional non-repainting behavior.
Q: What timeframes work best?
A: Works on ALL timeframes! Lower Depth values (5-8) for lower timeframes, higher Depth (12-20) for higher timeframes.
Q: Can I use this for automated strategies?
A: Yes! The alert conditions can trigger pulsewire alerts for manual or webhook-based trading.
🙏 Credits
Original MT4 ZigZag logic ported to Pine Script™ v6 by lucemanb
Renamed and optimized as Cody Zig Zag
📝 Keywords
ZigZag MT4 Elliott Wave Swing High Swing Low Support Resistance Divergence Breakout Harmonic Patterns Price Action Trend Reversal Higher High Lower Low Technical Analysis PulseWire Indicator Free Indicator
⭐ Support & Feedback
If you find this indicator useful:
Like & Follow for more tools
Leave a review with your suggestions
Share with your trading community
Happy Trading! 🚀
Disclaimer: This indicator is for educational and analytical purposes. Past performance does not guarantee future results. Always practice proper risk management. Indicator
Indicator
Pannello Multi-Account con Spread e Dimensione Regolabile📘 Indicator Description: Multi-Account Execution Panel with Spread-Adjusted Risk
This indicator is designed for traders who manage multiple accounts with different capital sizes and execution models—such as a personal account and a prop firm account. It provides a visual panel that calculates and displays the ideal position size for each account, factoring in stop loss, spread, and risk preferences.
🔧 Key Features:
- Manual risk input in USD for the personal account (e.g., $2, $5, $10)
- Percentage-based risk for the prop firm account (e.g., 1% of €5,000)
- Spread-adjusted stop loss for each account, ensuring accurate risk calculation
- Real-time pip value calculation based on the current symbol
- Position size output:
- In units for the personal account
- In standard lots for the prop firm account
- Adjustable table size (Compact, Standard, Extended) to fit your screen and workflow
🧠 Ideal for:
- Traders who execute sequentially across multiple accounts
- Those who want precise, spread-aware sizing without manual calculations
- Discretionary strategies that require visual clarity and execution discipline
Italian Indicator
Panel Multi-Cuenta con Spread y Tamaño Ajustable📘 Indicator Description: Multi-Account Execution Panel with Spread-Adjusted Risk
This indicator is designed for traders who manage multiple accounts with different capital sizes and execution models—such as a personal account and a prop firm account. It provides a visual panel that calculates and displays the ideal position size for each account, factoring in stop loss, spread, and risk preferences.
🔧 Key Features:
- Manual risk input in USD for the personal account (e.g., $2, $5, $10)
- Percentage-based risk for the prop firm account (e.g., 1% of €5,000)
- Spread-adjusted stop loss for each account, ensuring accurate risk calculation
- Real-time pip value calculation based on the current symbol
- Position size output:
- In units for the personal account
- In standard lots for the prop firm account
- Adjustable table size (Compact, Standard, Extended) to fit your screen and workflow
🧠 Ideal for:
- Traders who execute sequentially across multiple accounts
- Those who want precise, spread-aware sizing without manual calculations
- Discretionary strategies that require visual clarity and execution discipline
Spanish Indicator
Indicator
Indicator
FTMO Rules MonitorFTMO Rules Monitor: Stay on Track with Your FTMO Challenge Goals
TLDR; You can test with this template whether your strategy for one asset would pass the FTMO challenges step 1 then step 2, then with real money conditions.
Passing a prop firm challenge is ... challenging.
I believe a toolkit allowing to test in minutes whether a strategy would have passed a prop firm challenge in the past could be very powerful.
The FTMO Rules Monitor is designed to help you stay within FTMO’s strict risk management guidelines directly on your chart. Whether you’re aiming for the $10,000 or the $200,000 account challenge, this tool provides real-time tracking of your performance against FTMO’s rules to ensure you don’t accidentally breach any limits.
NOTES
The connected indicator for this post doesn't matter.
It's just a dummy double supertrends (see below)
The strategy results for this script post does not matter as I'm posting a FTMO rules template on which you can connect any indicator/strategy.
//@version=5
indicator("Supertrends", overlay=true)
// Supertrend 1 Parameters
var string ST1 = "Supertrend 1 Settings"
st1_atrPeriod = input.int(10, "ATR Period", minval=1, maxval=50, group=ST1)
st1_factor = input.float(2, "Factor", minval=0.5, maxval=10, step=0.5, group=ST1)
// Supertrend 2 Parameters
var string ST2 = "Supertrend 2 Settings"
st2_atrPeriod = input.int(14, "ATR Period", minval=1, maxval=50, group=ST2)
st2_factor = input.float(3, "Factor", minval=0.5, maxval=10, step=0.5, group=ST2)
// Calculate Supertrends
= ta.supertrend(st1_factor, st1_atrPeriod)
= ta.supertrend(st2_factor, st2_atrPeriod)
// Entry conditions
longCondition = direction1 == -1 and direction2 == -1 and direction1 == 1
shortCondition = direction1 == 1 and direction2 == 1 and direction1 == -1
// Optional: Plot Supertrends
plot(supertrend1, "Supertrend 1", color = direction1 == -1 ? color.green : color.red, linewidth=3)
plot(supertrend2, "Supertrend 2", color = direction2 == -1 ? color.lime : color.maroon, linewidth=3)
plotshape(series=longCondition, location=location.belowbar, color=color.green, style=shape.triangleup, title="Long")
plotshape(series=shortCondition, location=location.abovebar, color=color.red, style=shape.triangledown, title="Short")
signal = longCondition ? 1 : shortCondition ? -1 : na
plot(signal, "Signal", display = display.data_window)
To connect your indicator to this FTMO rules monitor template, please update it as follow
Create a signal variable to store 1 for the long/buy signal or -1 for the short/sell signal
Plot it in the display.data_window panel so that it doesn't clutter your chart
signal = longCondition ? 1 : shortCondition ? -1 : na
plot(signal, "Signal", display = display.data_window)
In the FTMO Rules Monitor template, I'm capturing this external signal with this input.source variable
entry_connector = input.source(close, "Entry Connector", group="Entry Connector")
longCondition = entry_connector == 1
shortCondition = entry_connector == -1
🔶 USAGE
This indicator displays essential FTMO Challenge rules and tracks your progress toward meeting each one. Here’s what’s monitored:
Max Daily Loss
• 10k Account: $500
• 25k Account: $1,250
• 50k Account: $2,500
• 100k Account: $5,000
• 200k Account: $10,000
Max Total Loss
• 10k Account: $1,000
• 25k Account: $2,500
• 50k Account: $5,000
• 100k Account: $10,000
• 200k Account: $20,000
Profit Target
• 10k Account: $1,000
• 25k Account: $2,500
• 50k Account: $5,000
• 100k Account: $10,000
• 200k Account: $20,000
Minimum Trading Days: 4 consecutive days for all account sizes
🔹 Key Features
1. Real-Time Compliance Check
The FTMO Rules Monitor keeps track of your daily and total losses, profit targets, and trading days. Each metric updates in real-time, giving you peace of mind that you’re within FTMO’s rules.
2. Color-Coded Visual Feedback
Each rule’s status is shown clearly with a ✓ for compliance or ✗ if the limit is breached. When a rule is broken, the indicator highlights it in red, so there’s no confusion.
3. Completion Notification
Once all FTMO requirements are met, the indicator closes all open positions and displays a celebratory message on your chart, letting you know you’ve successfully completed the challenge.
4. Easy-to-Read Table
A table on your chart provides an overview of each rule, your target, current performance, and whether you’re meeting each goal. The table adjusts its color scheme based on your chart settings for optimal visibility.
5. Dynamic Position Sizing
Integrated ATR-based position sizing helps you manage risk and avoid large drawdowns, ensuring each trade aligns with FTMO’s risk management principles.
Daveatt Strategy
