Indicator
Inside / Outside BarsThis indicator highlights Inside Bars and Outside Bars directly on the chart, helping identify consolidation and expansion phases in price action.
Key Features:
Inside Bar Detection
An Inside Bar is a candle whose high and low are fully contained within the range of the previous candle.
This typically signals consolidation, reduced volatility, and potential buildup before a breakout.
Outside Bar Detection
An Outside Bar is a candle whose high is higher than the previous high and whose low is lower than the previous low.
This reflects range expansion, increased volatility, and possible reversal or continuation momentum.
Visual Highlighting
Inside and Outside Bars are clearly marked on the chart with customizable colors, allowing quick recognition without manual analysis.
Clean and Minimal Design
-The indicator is designed to avoid clutter, focusing only on key price action signals.
-Works on Any Market
-Can be applied to crypto, forex, stocks, and indices.
Use Cases:
-Identify breakout setups after consolidation (Inside Bars)
-Spot volatility expansion and potential reversals (Outside Bars)
-Combine with higher timeframe levels and liquidity concepts for improved decision-making
This tool is built for traders who rely on pure price action and want a clear, automated way to track key candle patterns. Indicator
Outside Bar & 2-Bar Reversal Alerts + SystemOutside Bar & 2-Bar Reversal — Price Action Reversal Detection with Integrated Trade Management
Hello friends and traders!
🔹 Introduction
This indicator — Outside Bar & 2-Bar Reversal — automatically identifies two of the most structurally sound price action reversal patterns and overlays a complete trade management system directly on your chart.
The patterns this indicator detects are rooted in a simple but powerful idea: momentum exhaustion followed by full absorption. When price makes an aggressive directional push and is then completely engulfed by the opposing side, it often signals that the prevailing move has run out of willing participants.
The indicator also includes an optional suite of confluence filters — VWAP, swing sweeps, and time-of-day — so you can isolate the highest-quality setups rather than trading every signal blindly.
I'll cover the pattern logic, the trade management system, and all filters in detail throughout this description.
🔹 The Premise
🔸 Why Reversal Candles Work
Price moves because of imbalance. When more aggressive buyers than sellers are active, price rises. When more aggressive sellers than buyers are active, price falls.
Reversal candle patterns are useful because they attempt to identify the moment that imbalance flips — where one side that was previously dominant is fully overcome by the other.
The key word is fully. A simple bearish candle after a bullish candle tells you very little. What's meaningful is when the opposing candle completely engulfs the prior move — taking out its low, closing above its open, and reaching above its high. That's not just a pause. That's a statement.
This is the foundation of both patterns this indicator detects.
🔸 What Is an Outside Bar?
An outside bar is a candle that completely engulfs the prior candle — its range exceeds the prior candle's range on both sides.
But not all outside bars are created equal. A random outside bar on a quiet consolidation bar means very little. The patterns this indicator targets require context and directionality before the signal fires.
Bullish Outside Bar — Full Conditions:
Candle 1 must be bearish — it closes below its open
Candle 1 must close below the prior candle's close — a genuine continuation of selling
Candle 1's low must be below the prior candle's low — it must make a lower low, showing directional commitment
Candle 2 (signal candle) must have a lower low than Candle 1 — extending the flush
Candle 2 must close above Candle 1's open — full absorption of the bearish candle
Candle 2 must have a higher high than Candle 1 — completing the engulf
The result: a setup where price made a committed bearish push, and then a single candle came in, swept below it, and closed above the entire prior move. Buyers didn't just show up — they overwhelmed every seller from the prior candle.
Bearish Outside Bar — Full Conditions:
The exact mirror. A committed bullish candle that makes a higher high, followed by a signal candle that sweeps above it and closes below its entire range. Sellers overwhelmed every buyer.
🔸 What Is a 2-Bar Reversal?
The 2-Bar Reversal is a related but distinct pattern. Rather than requiring full range engulfment, it focuses on close-to-close extremity.
Bullish 2-Bar Reversal:
Candle 1 closes entirely below the low of the candle before it — an aggressive, committed flush
Candle 2 closes above the open of Candle 1 — a full reclaim of the prior candle's starting point
The logic: if price closes below a prior candle's entire range, sellers were aggressive. If the very next candle reclaims all of that, buyers responded even more aggressively. The speed of the reversal is what makes this significant.
Bearish 2-Bar Reversal:
Candle 1 closes above the prior candle's high. Candle 2 closes below Candle 1's open. Immediate and full rejection of the breakout.
🔹 Integrated Trade Management
Every signal automatically places three levels on your chart so you never have to manually calculate a trade again.
🔸 Entry
The open of the candle immediately following the signal candle. You're not chasing — you're entering at the next structured open after confirmation is complete.
🔸 Stop Loss
The open of the signal candle itself. The reasoning: if price returns to where the signal candle opened, the reversal thesis is structurally compromised.
🔸 Take Profit
Fully user-adjustable R multiple. Default is 2R — meaning for every dollar risked, you're targeting two dollars of reward. Adjustable from 0.1R to any value via the settings panel.
🔸 Line Behavior
All three lines extend to the right in real time and automatically terminate the moment price hits either the TP or SL level. No manual cleanup. No cluttered leftover lines. Every historical trade remains visible on the chart so you can review setups at a glance.
🔹 Live Performance Table
A built-in stats table tracks every closed trade automatically:
Total Trades — all resolved trades
Wins — trades that reached the TP level
Losses — trades that hit the SL level
Win Rate — displayed as a percentage, color coded green above 50% and red below
Load any chart, any timeframe, any market — the table populates in real time and gives you an instant read on how the patterns have performed under your current filter settings.
🔹 Confluence Filters
Each filter is independently toggleable. Use one, all, or none — the indicator works standalone without any filters active.
🔸 VWAP Filter
VWAP (Volume Weighted Average Price) is widely used by institutional participants as an intraday benchmark. Price trading above VWAP is generally considered a bullish market structure for the session; below VWAP is bearish.
When enabled, this filter requires:
Bullish signals: the signal candle must close above VWAP
Bearish signals: the signal candle must close below VWAP
This keeps you aligned with the intraday institutional bias rather than trading reversals against the dominant order flow of the session.
🔸 Swing Sweep Filter
One of the most reliable contexts for a reversal pattern is when it occurs after a liquidity sweep — price briefly trading through a prior swing point before reversing. This is often where stop orders from trapped traders trigger, adding fuel to the reversal.
When enabled:
Bullish signals only show if the signal candle's low swept below a recent pivot low
Bearish signals only show if the signal candle's high swept above a recent pivot high
Both the lookback window and the pivot strength (number of bars required on each side to qualify as a swing) are fully adjustable.
🔸 Time Window Filter
Not all hours of the trading day are equal. The highest-quality price action signals tend to occur during periods of genuine institutional participation — typically the first few hours of the New York session when volume, spread, and volatility are all at their daily peak.
When enabled, signals are restricted to a user-defined time window. Default is 8:00 AM – 11:00 AM EST, covering the New York open. The start and end times are individually adjustable by hour and minute. Uses the America/New_York timezone, so EST/EDT daylight saving transitions are handled automatically.
🔹 Settings Overview
SettingDescriptionShow Bullish / Bearish SignalsToggle each direction independentlyShow Outside BarsToggle OB pattern on/offShow 2-Bar ReversalsToggle 2BR pattern on/offTake Profit R MultipleAdjustable TP target (default 2R)Show Trade LinesToggle entry/SL/TP linesLine ColorsIndependently customizableTime Window FilterOn/off + start/end timeVWAP FilterOn/offSwing Sweep FilterOn/off + lookback + pivot strength
🔹 Works On Any Market & Timeframe
The patterns are purely price-action based — no volume dependency, no indicator inputs. They apply equally to equities, futures, forex, and crypto. Most effective on intraday timeframes (1m–15m) during high-liquidity sessions, but the logic holds on higher timeframes for swing traders as well.
🔹 Closing Remarks
The Outside Bar and 2-Bar Reversal are not new concepts. Traders have been observing these patterns for decades. What this indicator adds is precision in definition — ensuring every signal meets a strict structural checklist rather than firing on any loosely engulfing candle — combined with a fully automated trade management overlay and a real-time performance table.
The filters exist because context matters. The same pattern in the middle of a choppy afternoon session, below VWAP, with no liquidity sweep, is a different proposition to the same pattern at the New York open, above VWAP, after a clean sweep of a prior swing low.
Use the filters to build a ruleset that matches your edge, and use the performance table to validate it.
Drop a comment below with the market and timeframe you're testing this on — always interested to see how different traders apply price action tools. Indicator
Indicator
Indicator
Indicator
Salman Indicator: Multi-Purpose Price ActionSalman Indicator: Multi-Purpose Price Action Tool for Pin Bars, Breakouts, and VWAP Anchoring
This indicator provides a comprehensive suite of price action insights, designed for active traders looking to identify key market structures and potential reversals. The script incorporates a Quarterly VWAP for trend bias, marks pin bars for possible reversal points, highlights outside bars for volatility signals, and indicates simple breakouts and pivot-level breaks. Customizable settings allow for flexibility in various trading styles, with default settings optimized for daily charts.
Outside Bars : Represented by an ⤬ symbol on the chart, these indicate bars where the current high is greater than the previous bar’s high, and the low is lower than the previous bar’s low, signaling high volatility and potential market reversals.
Pin Bars : Denoted by a small dot at the top or bottom of a candle’s wick, these are crucial signals of potential reversal areas. Pin bars are identified based on the percentage length of their shadows, with adjustable strictness in settings.
Quarterly VWAP : The light blue line on the chart represents the VWAP (Volume-Weighted Average Price), which is anchored to the Quarterly period by default. The VWAP acts as a directional bias filter, helping you to determine underlying market trends. This period, source, and offset are fully adjustable in the script’s settings.
Simple Breaks : Hollow candles on the chart indicate "simple breaks," defined when the current bar closes above the previous high or below the previous low. This is an effective way to highlight directional momentum in the market.
Bonus Pivot Breaks : The tilde symbol ~ appears when the price closes above or below prior pivot high/low levels, helping traders spot significant breakout or breakdown points relative to recent pivots.
Alerts
Simple Breaks : Alerts you when a breakout occurs beyond the previous bar’s high or low. Pin Bars : Notifies you of potential reversal points as indicated by bullish or bearish pin bars. Outside Bars : Triggers an alert whenever an outside bar is detected, indicating possible volatility changes.
How to Use
VWAP for Trend Bias : Use the Quarterly VWAP line to gauge overall market trend, with settings that allow adjustment to daily, weekly, monthly, or even larger time frames.
Pin Bars for Reversal Potential : Look for the dot markers on candle wicks, where the strictness of the pin bar detection can be adjusted via settings to match your trading preference.
Simple and Pivot Breaks for Momentum : Watch for hollow candles and the tilde symbol ~ as indicators of potential breakout momentum and pivot break levels, respectively.
This script can serve traders on multiple timeframes, from daily to weekly and beyond. The flexible configuration allows for adjustments in VWAP anchoring and pin bar criteria, providing a tailored fit for individual trading strategies. Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
PopGun Trading, PG Pattern DetectorPopGun Bar Pattern Strategy
PG Trading
The indicator does the following:
It detects the Outside Bar, the smaller inside Bar and the 3rd Pop Gun that is bigger, than the inside Bar.
When the Pop Gun was detected, the indicator will calculate 3 targets for long and short trades.
In our understanding, a Pop Gun is neutral. The next candles after the Pop Gun will decide if the PG breakout is bullish or bearish.
So if one of the next candles after the PG is breaking the high or low of the PG Candle, this is a breakout confirmation and can traded long or short.
We are using the PG Indicator for Stock, Futures and Index Trading.
The Script uses 3 targets per default, but you can extend the target dots up to 6.
If you want to see the targets in plain text, you can activate the PG Box.
The targets are calculated really easy: Just the height of the candle multiplied with 1, 2 and 3 (4,5 and 6 additionally). In some communities there is an ATR calculation for more extended targets but it seems, that the ATR Calculation will sometimes lead to unreachable targets if the ATR is really high intraday...
We trade PopGuns starting at M15 chart. I think PGs smaler than M15 are not worth a trade...
Maybe i will add the ATR Function in the future just to compare the 2 ways to calculate PG targets. We are really doing well with 1,2,3 targets based on the PG Candle size. (Low to High).
Please leave a comment if you have some feature requests or input to make this the best Pop Gun Indicator in Trading View ;-) Indicator
Indicator
Candilator RSI [AstrideUnicorn]OVERVIEW
The name Candilator comes from blending the words "candlestick" and "oscillator". And as the name suggests, this indicator is a good old RSI plotted as a candlestick chart. To produce a candlestick chart, Candilator RSI calculates four RSI's based on the open, high, low, and close time series. It also has a candlestick patterns detection feature.
HOW TO USE
You can use Candilator RSI as a normal RSI to analyze momentum, detect overbought and oversold markets, and find the oscillator's divergences with the price. You can also get creative and apply all sorts of technical analysis to the RSI candlestick chart, including candlestick patterns analysis.
Candilator RSI can automatically scan the price for some candlestick patterns in the overbought and oversold zones. This feature can help detect price reversals early.
SETTINGS
The indicator settings are divided into two groups: Main Settings and Pattern Detection. In the Main Settings, you can find standard RSI settings. In the Pattern Detection part, you can turn on and off the automatic search for a particular candlestick pattern. Indicator
Strategy
Strategy
Indicator
Indicator
