Apex Edge - NQ Correlation HUDApex Edge — NQ Correlation HUD
Note: This script is the HUD only. Screenshots may also show separate Supply & Demand zone and key-level tools running alongside it for extra confluence — those are independent indicators, not part of this script, and aren't required for the HUD to function.
What it does
Apex Edge — NQ Correlation HUD is a compact on-chart dashboard built for trading Nasdaq-100 index products (NQ, MNQ, and similar). Rather than manually flicking between the VIX and individual Mega-Cap Tech charts to gauge whether the broader market agrees with a setup, this indicator brings that context onto your current chart in one glance.
It scores your current instrument's own momentum and structure, then does the same for the VIX and seven Magnificent-7 stocks — live, every bar — and tells you visually which of those names are actually confirming your bias right now versus which aren't.
The HUD: Ticker / Fuel / Confluence
The dashboard is a simple 3-column table:
Ticker — the symbol for that row. Row 1 always reflects whatever chart you're currently on (so it updates automatically if you switch between NQ and MNQ, or any other symbol). Below that: VIX, then the 7 Mag7 names.
Fuel — a 0–10 momentum score for that symbol (see scoring below), shown as a fraction against your configured minimum threshold, e.g. 6/6.
Confluence — a directional vote out of 5, shown as ▲x/▼y, indicating how many of 5 independent components currently lean bullish versus bearish for that symbol.
What it monitors, and why
VIX — the market's fear gauge. It typically moves inversely to equities, so a VIX reading that's rising while your chart is bearish (or falling while your chart is bullish) is a classic confirmation signal. The HUD surfaces VIX's own Fuel and Confluence so you don't have to switch charts to check it.
The 7 Mag7 stocks (defaults: AAPL, MSFT, GOOGL, AMZN, NVDA, META, TSLA — all fully customizable in settings) — these carry substantial weight in the Nasdaq-100 and tend to drive a large share of its movement. When several of them are genuinely moving with your NQ/MNQ chart, that's real confirmation your setup isn't just noise on one instrument; when they're diverging, it's a reason for caution even if your chart alone looks clean.
How each pair offers confluence
A single chart can give a false signal — a stop run, a low-liquidity spike, an isolated headline. Checking whether the broader Nasdaq complex agrees filters a lot of that out. If your NQ/MNQ setup is bearish and the majority of Mag7 names are also showing bearish confluence while correlating with your chart's actual price action, and VIX is leaning bullish (its typical inverse relationship holding up), that's three independent confirmations lining up rather than one chart in isolation.
How the columns are scored
Fuel Score (0–10) is a multi-factor momentum read, built from:
Volume Z-score relative to a rolling average
Candle body dominance within its own range
Where the close sits within the bar's high-low range
ATR expansion versus its own rolling average
Confluence Score (out of 5) is a 5-component directional vote:
LTF trend (Hull moving average)
HTF trend (Hull moving average on a higher timeframe)
LTF RSI position
HTF RSI position
Price structure vs. a rolling range midpoint
Each component casts one bullish or bearish vote; the tally is shown as ▲bullish/▼bearish.
The correlation layer
This is what separates the Mag7 rows from a static watchlist. Each Mag7 ticker's title is colour-coded in real time:
Green — that symbol is BOTH rolling-correlated to your current chart above a threshold you set, AND its own Confluence is currently agreeing with your chart's direction.
Red — either condition fails: it's not correlating closely enough right now, or it's correlating but currently pointing the other way.
This means the HUD isn't just showing you 7 static numbers — it's telling you, live, which of the 7 are actually confirming your bias in this moment versus which are just along for the ride historically. Correlation lookback, the green/red threshold, and the correlation-guide tooltip (with standard statistical strength bands) are all configurable.
Built-in alerts
Two included alert conditions ("HUD Setup: Long Bias" / "HUD Setup: Short Bias") fire when your chart's Confluence bias is shared by a configurable number of the 7 Mag7 symbols AND VIX Confluence is leaning the opposite way. These are deliberately price-agnostic — they tell you when the broader HUD context has aligned, not when to enter. Pair them with your own key-level or zone tools to time actual entries once the alert fires.
Settings
Fuel/Confluence Dashboard toggle, dashboard position, minimum Fuel threshold
Hull MA period and HTF resolution
Multi-Pair HUD toggle, monitor timeframe for the 7 Mag7 rows
VIX symbol, all 7 Mag7 symbols (freely swappable)
Correlation lookback length, correlation threshold, min Mag7 aligned count for alerts
Align it with other confluence indicators to time your entry. Below is an example of the HUD running alongside 2 indicators (Key levels & Supply & Demand zones).
A NOTE ON USE:
Market hours affect the correlation rows. NQ/MNQ trade nearly 24 hours; the Mag7 equities only trade actively during NASDAQ hours (with an extended pre/post-market window beyond that). Outside those hours, correlation can legitimately read n/a for some or all Mag7 rows — that's expected behaviour, not a fault, since a closed/flat equity price has no variance to correlate against. Correlation readings are most meaningful during and immediately around the NASDAQ session; Fuel and Confluence continue working normally at all hours since they don't depend on cross-symbol variance.
This tool is designed to support discretionary trading decisions around Nasdaq-100 index products — it doesn't generate entries or exits on its own, and none of its readings guarantee a particular outcome. Fuel, Confluence, and correlation are all descriptive of current and historical price behaviour, not predictions. As with any tool, backtest and forward-test on a demo account before relying on it in a live or funded environment. Nothing in this script or its description constitutes financial advice. Indicator
Mini SMC Screener I EonMetrics Mini SMC Screener
Mini SMC Screener watches up to 5 symbols at once and answers a question no single-chart indicator can: WHERE is something happening right now. Instead of flipping through charts, you read one small table: market structure direction and the freshest Fair Value Gap event for every symbol on your list.
HOW IT WORKS
The script scans each symbol on the timeframe you choose (empty = chart timeframe) and reports two independent readings per symbol.
🔵Structure — a strict MSS/BOS engine. Swing points are confirmed pivots (a candle with N higher/lower candles on both sides). A close above the last confirmed swing high in a downtrend is a Market Structure Shift to bullish; a close below the protected swing low in an uptrend shifts structure bearish. Between shifts, breaks of structure in trend direction keep updating the protected level. The column shows the current state: ▲ Bull or ▼ Bear.
🔵FVG — a three-candle imbalance tracker. A Fair Value Gap forms when the first and third candle of a three-candle sequence do not overlap (the low of the newest candle stays above the high of the candle two bars back, or the mirror for bearish). The gap between them is unfilled territory. The engine registers a gap only when its height clears an ATR-based minimum size, keeps it active until price trades through its far edge (a full fill), and reports the freshest of two events:
- New — a qualifying gap just formed (displacement is happening now)
- Retest — price traded back INTO a still-open gap (the return many traders wait for)
Each event ages out of the table after a configurable number of bars, so the column only ever shows fresh information — an FVG event from 200 bars ago is not a setup and is not displayed.
Why the two are combined in one script: they answer the two halves of the same scanning question. Structure tells you the directional context of a symbol; the FVG event tells you that something tradeable is happening there right now. One without the other is either context with no trigger, or a trigger with no context — a scanner needs both on one row to be useful.
KEY FEATURES
- 5 symbol slots, each with its own on/off toggle — defaults cover crypto, forex, gold and an index; replace them with your own watchlist
- Structure column: live Bullish / Bearish read from confirmed swing pivots (non-repainting state machine — the state changes only on a confirmed close through a level)
- FVG column: New / Retest events with age in bars ("now", "3b", …); the cell background lights up when the event happened on the current bar
- ATR size filter — noise-sized gaps never make it into the table
- Freshness windows for FVG events, so stale signals disappear on their own
- Alerts: per-symbol alert() messages (structure flips, new FVG, FVG retest) plus two named conditions — "Structure flip (any symbol)" and "FVG event (any symbol)"
- Scan timeframe input — scan a higher timeframe than your chart; a warning shows if you accidentally scan below the chart timeframe (unreliable by design on PulseWire)
- Table position and text size inputs
HOW TO USE
1. Add the indicator to any chart and open Settings → Symbols. Replace the default tickers with the instruments you actually follow.
2. Pick a Scan Timeframe — the chart timeframe or higher. A common setup: chart on M15, scan on M15 or H1.
3. Read rows left to right: Structure gives you the direction bias, FVG tells you whether a fresh imbalance or a retest is in play on that symbol.
4. The combination many traders look for: structure and a fresh FVG event pointing the SAME way — e.g. ▲ Bull structure plus a bullish FVG retest.
5. Set an alert with "Any alert() function call" to get the detailed per-symbol messages without watching the table.
SETTINGS
- Scan: scan timeframe
- Symbols: 5 slots with toggles
- Structure: pivot strength (candles each side to confirm a swing)
- Fair Value Gaps: minimum gap size (× ATR), event freshness (bars)
- Alerts: master toggle
- Table: position, text size, bullish/bearish colors
A note on how the scan works under the hood: each symbol is evaluated in its own sandboxed context via request.security — the full engine state (structure machine, active gap list) is kept separately per symbol, and signals commit on bar close. Disabled slots still consume their data request (a PulseWire compile-time requirement); the toggle hides the row.
This tool reports structure state and imbalance events. It does not generate buy/sell signals, targets or stop levels — what you do with a reading is your decision. It is not financial advice; always do your own analysis and manage your own risk.
Part of the EonMetrics toolset.
Indicator
Pair Correlation Master [Macro]The Main Idea
Trading represents a constant battle between Systemic Flows (the whole market moving together) and Idiosyncratic Moves (one specific asset moving on its own).
This tool allows you to monitor a "basket" of 4 assets simultaneously (e.g., the major USD pairs). It answers the most important question in forex and multi-asset trading: "Is this move happening because the Dollar is weak, or because the Euro is strong?"
It separates the "Signal" (the unique move) from the "Noise" (the herd movement).
1. The Chart Lines: The "Race" (Macro Trend)
Think of the lines on your chart as a long-distance race. They visualize the performance of all 4 assets over the last 200 candles (adjustable).
- Bunched Together: If all lines are moving in the same direction, the market is highly correlated. (e.g., "The Dollar is selling off everywhere").
- Fanning Out: If the lines are spreading apart, specific currencies are outperforming others.
- The Zero Line: This is the starting line.
--- Above 0: The pair is in a macro uptrend.
--- Below 0: The pair is in a macro downtrend.
2. The Dashboard: The "Health Check" (Micro Data)
The table in the top right gives you the immediate statistics for right now.
- A. The Z-Score (The Rubber Band)
This measures how "stretched" price is compared to its normal behavior.
- White (< 2.0): Normal trading activity.
- Orange (> 2.0): The price is stretching. Warning sign.
- Red (> 3.0): Critical Stretch. The rubber band is pulled to its limit. Statistically, a pullback or pause is highly likely.
B. The Star (★)
The script automatically calculates the average behavior of your group. If one asset is behaving completely differently from the rest, it marks it with a Star (★).
- Example: EURUSD, GBPUSD, and NZDUSD are flat, but AUDUSD is rallying hard. AUDUSD gets the ★. This is where the unique opportunity lies.
🎯 Best Uses: 4H & Daily Timeframes
This indicator is tuned for "Macro" analysis. It works best on the "4-Hour" and "Daily" charts to filter out intraday noise and capture swing trading moves.
- Strategy 1: The "Rubber Band" Snap (Mean Reversion)
- Setup: Look for a Z-Score in the RED (> 3.0) on the Daily timeframe.
- Action: This indicates an unsustainable move. Look for reversals or exhaustion patterns to trade against the trend back toward the mean.
- Strategy 2: The "Lone Wolf" (Trend Following)
- Setup: Look for the asset with the Star (★).
- Action: If the whole basket is flat (Balanced), but the Star asset is breaking out, that creates a high-quality trend trade because that specific currency has its own catalyst (News/Earnings).
- Strategy 3: Systemic Flows (Basket Trading)
- Setup: The dashboard footer says "⚠️ SYSTEMIC MOVE."
- Action: This means everything is moving together (e.g., a massive USD crash). Don't look for unique setups; just join the trend on the strongest pair.
Dashboard Footer Key
The bottom of the table summarizes the current state of the market for you:
- Balanced / Rangebound: The market is quiet. Good for range trading.
- Focus: : Trade this specific pair. It is moving independently.
- Systemic Move: The whole basket is moving violently. Trade the momentum.
p.s. Suggestion - apply and use on the chart rather than an oscillator. Indicator
Multi-Ticker Anchored CandlesMulti-Ticker Anchored Candles (MTAC) is a simple tool for overlaying up to 3 tickers onto the same chart. This is achieved by interpreting each symbol's OHLC data as percentages, then plotting their candle points relative to the main chart's open. This allows for a simple comparison of tickers to track performance or locate relationships between them.
> Background
The concept of multi-ticker analysis is not new, this type of analysis can be extremely helpful to get a gauge of the over all market, and it's sentiment. By analyzing more than one ticker at a time, relationships can often be observed between tickers as time progresses.
While seeing multiple charts on top of each other sounds like a good idea...each ticker has its own price scale, with some being only cents while others are thousands of dollars.
Directly overlaying these charts is not possible without modification to their sources.
By using a fixed point in time (Period Open) and percentage performance relative to that point for each ticker, we are able to directly overlay symbols regardless of their price scale differences.
The entire process used to make this indicator can be summed up into 2 keywords, "Scaling & Anchoring".
> Scaling
First, we start by determining a frame of reference for our analysis. The indicator uses timeframe inputs to determine sessions which are used, by default this is set to 1 day.
With this in place, we then determine our point of reference for scaling. While this could be any point in time, the most sensible for our application is the daily (or session) open.
Each symbol shares time, therefore, we can take a price point from a specified time (Opening Price) and use it to sync our analysis over each period.
Over the day, we track the percentage performance of each ticker's OHLC values relative to its daily open (% change from open).
Since each ticker's data is now tracked based on its opening price, all data is now using the same scale.
The scale is simply "% change from open".
> Anchoring
Now that we have our scaled data, we need to put it onto the chart.
Since each point of data is relative to it's daily open (anchor point), relatively speaking, all daily opens are now equal to each other.
By adding the scaled ticker data to the main chart's daily open, each of our resulting series will be properly scaled to the main chart's data based on percentages.
Congratulations, We have now accurately scaled multiple tickers onto one chart.
> Display
The indicator shows each requested ticker as different colored candlesticks plotted on top of the main chart.
Each ticker has an associated label in front of the current bar, each component of this label can be toggled on or off to allow only the desired information to be displayed.
To retain relevance, at the start of each session, a "Session Break" line is drawn, as well as the opening price for the session. These can also be toggled.
Note: The opening price is the opening price for ALL tickers, when a ticker crosses the open on the main chart, it is crossing its own opening price as well.
> Examples
In the chart below, we can see NYSE:MCD NASDAQ:WEN and NASDAQ:JACK overlaid on a NASDAQ:SBUX chart.
From this, we can see NASDAQ:JACK was the top gainer on the day. While this was the case, it also fell roughly 4% from its peak near lunchtime. Unlike the top gainer, we can see the other 3 tickers ended their day near their daily high.
In the explanations above, the daily timeframe is used since it is the default; however, the analysis is not constrained to only days. The anchoring period can be set to any timeframe period.
In the chart below, you can observe the Daily, Weekly, and Monthly anchored charts side-by-side.
This can be used on all tickers, timeframes, and markets. While a typical application may be comparing relevant assets... the script is not limited.
Below we have a chart tracking COMEX:GCV2026 , FX:EURUSD , and COINBASE:DOGEUSD on the AMEX:SPY chart.
While these tickers are not typically compared side-by-side, here it is simply a display of the capabilities of the script.
Enjoy! Indicator
SMT Oscillator: Smarter Money Divergence Detector [PhenLabs]📊Phenlabs - SMT Oscillator: Smarter Money Divergence Detector
Version: PineScript™v6
📌Description
The SMT Oscillator is a sophisticated tool designed to identify smart money divergence between two correlated assets. By analyzing the momentum and volume-weighted price action of a primary and secondary symbol, traders can spot subtle shifts in market dynamics that often precede significant price movements. This indicator is built to provide a clearer, more filtered view of inter-market relationships, solving the common problem of false signals and market noise. Its primary purpose is to equip traders with a quantifiable edge in detecting potential reversals or continuations that are not obvious on a standard price chart.
🚀Points of Innovation
Dual-Symbol Divergence Core: Directly compares momentum (RSI or MACD) between two user-selected symbols to pinpoint true SMT divergence.
Volume-Weighted Analysis: Integrates volume delta into the divergence calculation, giving more weight to moves backed by significant market participation.
Entropy Filter for Noise Reduction: Employs an entropy calculation to filter out low-quality signals during choppy or consolidating market conditions.
Predictive Forecast Line: Utilizes a linear regression model to project the oscillator’s future trajectory, offering a forward-looking glimpse of potential momentum shifts.
Customizable Signal Sensitivity: Allows fine-tuning of overbought and oversold levels to adapt to different market volatilities and trading styles.
Integrated Signal Alerts: Provides built-in alerts for bullish/bearish zero crosses and overbought/oversold conditions.
🔧Core Components
Momentum Engine: The user can select either RSI or MACD as the underlying engine for the divergence calculation, allowing for flexibility in analysis.
Normalization Function: Price data from both symbols is normalized using percentage change to ensure a true “apples-to-apples” comparison, regardless of their nominal price differences.
Divergence Calculator: The core algorithm that subtracts the secondary symbol’s momentum from the primary’s and normalizes the result using the combined standard deviation.
Smoothing Mechanism: An Exponential Moving Average (EMA) is applied to the raw oscillator output to reduce choppiness and provide a clearer signal line.
🔥Key Features
Multi-Asset Comparison: Go beyond single-asset analysis by comparing correlated pairs like ES/NQ or BTC/ETH to uncover hidden trading opportunities.
Heatmap Visualization: An optional heatmap mode provides an intuitive visual representation of divergence strength, making it easier to gauge market sentiment at a glance.
Configurable Lookback and Timeframe: Adjust the lookback period and analysis timeframe to suit your specific strategy, from short-term scalping to long-term trend analysis.
Signal Markers: Visual markers are plotted directly on the chart for bullish and bearish zero-line crossovers, providing clear entry and exit signals.
🎨Visualization
SMT Oscillator Line: The primary visual element, colored blue for bullish (positive) divergence and orange for bearish (negative) divergence.
Zero Line: A solid horizontal line at the zero level, indicating the equilibrium point between the two assets. Crossovers of this line signal a shift in relative strength.
Overbought/Oversold Zones: Dotted lines at the +80 and -80 levels (customizable) that highlight extreme divergence readings, often indicating potential exhaustion points.
Forecast Line: A predictive line that plots the anticipated path of the oscillator, giving traders an advanced warning of potential changes in momentum.
📖Usage Guidelines
Setting Categories
Primary Symbol
Default: (Chart Symbol)
Description: The main asset you are analyzing. Leave blank to use the symbol currently on your chart.
Secondary Symbol
Default: CME_MINI:ES1! (used with NASDAQ futures due to inherent heavy correlation
Description: The asset to compare against the primary symbol.
Lookback Period
Default: 14
Range: 8-100
Description: Controls the calculation window for momentum (RSI/MACD). Higher values result in a smoother, less sensitive oscillator.
Divergence Type
Default: RSI
Options: RSI, MACD
Description: Choose the momentum indicator to use for the divergence calculation.
Enable Volume Weighting
Default: true
Description: When enabled, gives more weight to divergence signals that are accompanied by significant volume.
✅Best Use Cases
Identifying high-probability reversal points by spotting divergence in overbought or oversold territory.
Confirming the strength of a trend by observing sustained positive or negative divergence.
Pairs trading by taking a long position on the outperforming asset and a short position on the underperforming one during a divergence.
Risk management by recognizing when a current trend is losing its underlying momentum.
⚠️Limitations
Requires Correlated Assets: The indicator’s effectiveness is highly dependent on the selection of two assets with a known correlation (e.g., ES and NQ).
Not a Standalone System: Divergence signals should be used in conjunction with other forms of analysis (price action, market structure) and not as a complete trading system.
Lagging by Nature: As it is based on moving averages and past price data, the oscillator is inherently lagging and may not capture all rapid price changes.
💡What Makes This Unique
Combined Momentum & Volume: Unlike standard oscillators, it fuses momentum with volume delta for a more robust “Smart Money” perspective.
Noise-Filtering Mechanism: The proprietary entropy filter is a unique feature designed to weed out insignificant market chatter and focus on high-conviction signals.
🔬How It Works
Data Normalization:
The script first normalizes the price data of the two selected symbols into percentage changes. This ensures that the comparison is fair, regardless of the difference in their price scales.
Momentum Calculation:
It then calculates the chosen momentum value (either RSI or MACD histogram) for each of the normalized price series.
Divergence Computation:
The core of the indicator lies in subtracting the momentum of the secondary symbol from the primary one. This raw divergence is then optionally weighted by volume and filtered for market noise (entropy) to produce the final oscillator value.
💡Note:
For best results, use this indicator on adequate timeframes to filter out market noise. Always confirm signals with price action analysis before entering a trade. Indicator
Indicator
MAG 7 - Weighted Multi-Symbol Momentum + ExtrasOverview
This indicator aggregates the percentage change of multiple symbols into a single “weighted momentum” value. You can set individual weights to emphasize or de-emphasize particular stocks. The script plots two key items:
The default tickers in the script are:
AAPL (Apple)
AMZN (Amazon)
NVDA (NVIDIA)
MSFT (Microsoft)
GOOGL (Alphabet/Google)
TSLA (Tesla)
META (Meta Platforms/Facebook)
Raw Weighted Momentum (Histogram):
Each bar represents the combined (weighted) percentage change across your chosen symbols for that bar.
Bars are colored green if the momentum is above zero, or red if below zero.
Smoothed Momentum (Yellow Line):
An Exponential Moving Average (EMA) of the raw momentum for a smoother trend view.
Helps visualize when short-term momentum is accelerating or decelerating relative to its average.
Features
Symbol Inputs: Up to seven user-defined tickers, with weights for each symbol.
Smoothing Period: Set a custom lookback length to calculate the EMA (or switch to SMA in the code if you prefer).
Table Display: A built-in table in the top-right corner lists each symbol’s real-time percentage change, plus the total weighted momentum.
Alerts:
Configure alerts for when the weighted momentum crosses above or below user-defined thresholds.
Helps you catch major shifts in sentiment across multiple symbols.
How To Use
Select Symbols & Weights: In the indicator’s settings, specify the tickers you want to monitor and their corresponding weights. Weights default to 1 (equal weighting).
Watch the Bars vs. Zero:
Bars above zero mean a positive weighted momentum (the basket is collectively moving up).
Bars below zero mean negative weighted momentum (the basket is collectively under pressure).
Check the Yellow Line: The EMA of momentum.
If the bars consistently stay above the line, short-term momentum is stronger than its recent average.
If the bars dip below the line, momentum is weakening relative to its average.
Review the Table: Quick snapshot of each symbol’s daily percentage change plus the total basket momentum, all color-coded red or green.
Caution & Tips
This indicator measures rate of change, not absolute price levels. A rising momentum can still be part of a larger downtrend.
Always combine momentum readings with other technical and/or fundamental signals for confirmation.
For better reliability, experiment with different smoothing lengths to suit your trading style (shorter for scalping, longer for swing or positional approaches). Indicator
Indicator
Indicator
Indicator
Indicator
