EVA Ai+ Radar v25.2 Screener - Crypto & Stock LONG SHORT Si🧬 EVA Ai+ Radar — профессиональный рыночный скринер и индикатор для PulseWire, созданный для быстрого поиска перспективных торговых инструментов среди российских акций и популярных криптовалют.
Система одновременно анализирует до 20 активов, рассчитывает приоритет каждого инструмента и автоматически сортирует рынок по силе текущего движения. Вместо ручного переключения между графиками трейдер получает компактную премиальную панель с готовым рейтингом активов.
🔎 Что анализирует EVA Ai+ Radar
Для каждого инструмента рассчитываются:
направление краткосрочного и среднесрочного тренда;
положение цены относительно EMA;
сила тренда через ADX и DMI;
состояние RSI;
относительный торговый объём;
направленный рыночный поток Flow;
изменение цены;
итоговая сила и приоритет сигнала.
📊 Сигналы скринера
🟢 LONG — подтверждённое преимущество покупателей и восходящее направление.
🔴 SHORT — подтверждённое преимущество продавцов и нисходящее направление.
🟡 РАНО ↑ / РАНО ↓ — раннее формирование движения до достижения строгого порога основного сигнала.
⚪ НАБЛ. — инструмент пока не имеет достаточного преимущества для подтверждённого входа.
⚡ Два режима работы
RADAR — строгий режим для поиска подтверждённых сигналов LONG и SHORT.
РАНО — расширенный режим, дополнительно показывающий инструменты, в которых движение только начинает формироваться.
🛡️ Защита от перерисовки
По умолчанию скринер использует данные только закрытых свечей выбранного таймфрейма:
без lookahead_on;
без смещения сигналов в прошлое;
без перерисовки подтверждённых значений;
с безопасной обработкой недоступных торговых инструментов
🌍 Поддерживаемые рынки
🇷🇺 Российские акции Московской биржи:
Сбербанк;
Газпром;
Лукойл;
Роснефть;
Новатэк;
Норникель;
Полюс;
Татнефть;
ВТБ;
Яндекс.
₿ Криптовалюты:
Bitcoin;
Ethereum;
Solana;
BNB;
XRP;
Dogecoin;
Cardano;
Avalanche;
Chainlink;
Toncoin.
Все тикеры можно изменить в настройках индикатора.
⚙️ Основные возможности
✅ Скринер акций и криптовалют
✅ Одновременный анализ 20 инструментов
✅ Торговые сигналы LONG и SHORT
✅ Раннее обнаружение движения
✅ Автоматический рейтинг активов
✅ Анализ тренда, объёма, RSI, ADX и DMI
✅ Относительный объём и Flow
✅ Индикатор без перерисовки
✅ Настраиваемый таймфрейм
✅ Алерты PulseWire
✅ Премиальный интерфейс EVA
✅ Безопасная обработка недоступных тикеров
⚠️ Важная информация
EVA Ai+ Radar является аналитическим инструментом и не представляет собой инвестиционную рекомендацию. Сигналы индикатора необходимо оценивать совместно с рыночным контекстом, управлением капиталом и контролем риска.
🧬 EVA Ai+ Radar is a professional PulseWire market scanner designed to help traders quickly identify strong opportunities across major cryptocurrencies and Russian stocks.
The screener analyzes up to 20 markets simultaneously, calculates a priority score for every symbol, and automatically ranks instruments according to current trend strength and market momentum. Instead of manually switching between multiple charts, traders receive a compact premium dashboard with a structured market overview.
🔎 What EVA Ai+ Radar analyzes
For every selected symbol, the system evaluates:
short-term and medium-term trend direction;
price position relative to exponential moving averages;
trend strength using ADX and DMI;
RSI momentum;
relative trading volume;
directional market Flow;
price change;
final signal strength and priority score.
📊 Screener signals
🟢 LONG — confirmed bullish advantage and positive market direction.
🔴 SHORT — confirmed bearish advantage and negative market direction.
🟡 EARLY ↑ / EARLY ↓ — an emerging directional setup detected before the strict signal threshold is reached.
⚪ WATCH — the asset does not currently have enough directional advantage for a confirmed signal.
⚡ Two scanning modes
RADAR — strict mode designed to identify confirmed LONG and SHORT signals.
EARLY — expanded mode that also identifies assets where a new directional move may be starting.
🛡️ Non-repainting calculation
By default, the screener uses confirmed data from closed candles on the selected timeframe:
no lookahead_on;
no historical signal backfilling;
no repainting of confirmed values;
safe processing of unavailable or unsupported symbols.
If one selected ticker is temporarily unavailable, the remaining markets continue to be calculated normally.
💎 Premium EVA dashboard
The dashboard displays:
market ranking;
symbol;
LONG, SHORT, or EARLY signal;
signal strength;
percentage price change;
RSI and relative volume;
directional Flow;
number of active LONG, SHORT, and EARLY signals;
selected timeframe and calculation mode.
The visible list can be adjusted from 5 to 20 rows, while all enabled markets continue to be analyzed.
🔔 PulseWire alerts
The screener includes three alert conditions:
confirmed LONG signal detected;
confirmed SHORT signal detected;
EARLY directional setup detected.
Alerts can be configured using the standard PulseWire alert system.
🌍 Supported markets
🇷🇺 Russian stocks:
Sberbank;
Gazprom;
Lukoil;
Rosneft;
Novatek;
Norilsk Nickel;
Polyus;
Tatneft;
VTB;
Yandex.
₿ Cryptocurrencies:
Bitcoin;
Ethereum;
Solana;
BNB;
XRP;
Dogecoin;
Cardano;
Avalanche;
Chainlink;
Toncoin.
Every symbol can be changed through the indicator settings.
⚙️ Main features
✅ PulseWire stock and crypto screener
✅ Simultaneous analysis of 20 symbols
✅ LONG and SHORT trading signals
✅ Early trend detection
✅ Automatic market ranking
✅ Trend, volume, RSI, ADX, and DMI analysis
✅ Relative volume and directional Flow
✅ Non-repainting indicator
✅ Custom scanning timeframe
✅ PulseWire alerts
✅ Premium EVA interface
✅ Safe invalid-symbol handling
⚠️ Disclaimer
EVA Ai+ Radar is an analytical and educational tool. It does not provide financial or investment advice. Every signal should be evaluated together with market context, position sizing, risk management, and independent analysis. Indicator
Indicator
SXA: Super Xtation Amplitude | MTF FrameworkSXA (Super Xtation Amplitude) is a multi-timeframe market positioning framework designed to provide a complete visual overview of price location within the broader market structure.
Rather than focusing on entry signals, SXA combines trend context, volatility, session activity, anchored VWAPs, prior-day reference levels, Fibonacci projections, and higher-timeframe moving averages into a single environment. The objective is to help traders understand where price is currently trading relative to statistically and structurally significant areas.
The indicator was built around a simple principle:
"Price behaves differently depending on where it is located within the market."
By integrating multiple forms of context into one view, SXA allows traders to quickly identify premium and discount zones, trend alignment, session-driven liquidity areas, and potential reaction levels without switching between multiple indicators.
FEATURES
• Smart Trend Engine
Multi-timeframe moving average framework designed to visualize short, intermediate, and macro directional bias.
• Dynamic Trend Clouds
Visual cloud structures help identify trend alignment and potential transition zones between bullish and bearish conditions.
• Higher Timeframe Context
Daily 50 SMA and 200 SMA provide broader market structure and long-term directional references.
• Prior Day Reference Levels
Automatic plotting of previous day's Open, High, Low, and Close.
• Fibonacci Expansion Grid
Extended Fibonacci projections derived from the previous day's range to identify potential reaction zones and liquidity targets.
• Anchored Session VWAPs
Includes:
* Daily VWAP
* European Session VWAP
* Pre-New York VWAP
* New York Session VWAP
* Post-European Session VWAP
These levels provide institutional-style references for price acceptance and value.
• Weekly Structure Levels
Dynamic weekly Open, High, and Low levels update in real time throughout the trading week.
• Session Mapping
Visual session boxes highlight important market periods, including the Asian session and Pre-New York range.
INTENDED USE
SXA is designed as a contextual decision-support tool rather than a standalone trading system.
The indicator can be used to:
* Assess overall market positioning.
* Identify trend alignment across multiple timeframes.
* Locate potential support and resistance zones.
* Track session-driven liquidity.
* Monitor volatility expansion and contraction.
* Build discretionary trade narratives.
* Enhance existing trading systems.
SXA does not generate buy or sell recommendations. Instead, it seeks to answer a more fundamental question:
"Where is price currently located within the broader market landscape?"
By providing that context at a glance, traders can make more informed decisions while reducing chart clutter and indicator overload.
Created by @Peter_n_n
Indicator
Ribbon Conviction SystemRibbon Conviction System — Trend, Flow, Value and Adaptive Stop
Overview
This is a single decision-support system for intraday traders. It answers three questions on one chart: which way is the trend, how much conviction is behind the current move, and where a logical trailing stop sits. A moving-average ribbon defines direction, a conviction score from 0 to 100% grades every signal, and an adaptive volatility stop marks risk. The components are designed to work together as one filtered signal, not as a loose collection of separate indicators.
Why these components are combined
A moving-average crossover on its own fires constantly in sideways markets and gives no sense of whether a cross is meaningful. Each part added here exists to fix a specific weakness of the part before it, so the result is one filtered signal rather than several indicators stacked on a chart.
Ribbon (direction). Five Fibonacci-length averages — 8, 13, 21, 34, 55 — using a mix of Hull, EMA and Kaufman Adaptive Moving Average (KAMA). The KAMA anchors deliberately flatten in choppy conditions, so the ribbon stops giving direction when there is no trend. Weakness it leaves open: a crossover can still fire on a weak, low-conviction move.
Conviction score (filter). Instead of taking every crossover, each signal is graded 0–100% by blending four independent readings of the same bar, chosen because they measure different things rather than repeat each other:
Buy/sell flow — net buying versus selling pressure, inferred from lower-timeframe price-and-volume behaviour.
Effort vs move — how far price travelled for the volume spent; absorption and churn are penalised.
Trend quality — Kaufman Efficiency Ratio: directional travel divided by total path, separating trend from noise.
Price location — is price on the right side of value? Blends session VWAP slope, a swing-anchored VWAP, the session volume-profile value area (VAH/VAL/POC), and the prior session's VWAP and unfilled POC.
A flow-toxicity proxy (VPIN-style) then lowers the score when flow looks one-sided and unstable. Weakness it leaves open: all four readings come from the chart timeframe, so they can agree for the wrong reason.
Higher-timeframe agreement (independent confirmation). The same volatility-stop direction is computed on 3×, 5× and 15× the chart timeframe and folded in as a multiplier, not a fifth blended input. It is kept separate precisely because it is the one genuinely independent check on the chart-timeframe score: full agreement raises conviction, disagreement lowers it.
Adaptive volatility stop (risk). A Chande-style volatility stop whose ATR period and multiplier adapt through the Efficiency Ratio, so the stop tightens in clean trends and widens in chop. This turns the tool from "where is the signal" into "where is my risk if I take it."
How they work together
Direction (ribbon) decides the side. The conviction score decides whether a crossover on that side is worth showing and how strongly. Higher-timeframe agreement scales that conviction up or down. The adaptive stop shows the exit reference. Every signal is the product of all four stages working in sequence.
What it plots
The five-average ribbon with shaded bands; the 55 line is the bold trend-reference band.
Signal badges at qualifying crossovers, labelled with the band crossed and the conviction percent (for example "21 65%").
Optional value references: session VWAP, swing-anchored VWAP with bands, volume-profile VAH/VAL/POC, and the prior session's VWAP and POC.
The adaptive volatility stop as a step line with a live distance label.
A compact dashboard summarising trend, conviction and each component, higher-timeframe agreement, the stop, and the data mode.
A small higher-timeframe agreement ribbon.
How to use
Add it to an intraday chart. The defaults suit index futures, but direction works on any symbol.
Spot vs futures: many spot indices publish no real volume, which the flow, value-area and toxicity parts depend on. Under "Data source" the script auto-detects this and switches the volume-based parts to a time-at-price method so everything still works; you can also set the mode manually. The dashboard "Data" row shows which mode is active.
Trade in the ribbon's direction. Prefer signals with a higher conviction percent and higher-timeframe agreement, and treat low-conviction crosses as noise. Use "Hide signals weaker than" to suppress them.
Use the adaptive stop as a trailing-risk reference, sized to your own plan.
The "Look & size" group controls signal size, dashboard size and position, a "Minimal" preset (ribbon + signals + stop only), and band lightness.
Originality
The individual techniques — adaptive moving averages, the Efficiency Ratio, effort-versus-result, VWAP, volume profile and volatility stops — are publicly documented. What is original here is the integration: a single conviction score that fuses chart-timeframe flow, effort, efficiency and value, damps it by flow toxicity, and scales it by independent higher-timeframe agreement, then gates an adaptive-stop-aware signal on that score. The components were selected so each covers a distinct weakness, and redundant filters were deliberately left out to keep one clear signal.
Credits
Perry Kaufman — Adaptive Moving Average and Efficiency Ratio. Tushar Chande — Volatility Stop concept. The effort-versus-result component is an original, compact reimplementation inspired by the publicly described effort-versus-result method from the volume-spread-analysis lineage.
Disclaimer
This script is for education and information only. It is not financial, investment or trading advice and does not guarantee any outcome. Signals describe current conditions; they do not predict the future. Markets carry substantial risk of loss. Volume-based readings depend on the data feed and are unreliable on instruments without real volume. Always test on your own market and timeframe, and manage risk with your own stops and position sizing. The author is not a licensed financial advisor; consult a qualified professional before making financial decisions. You are solely responsible for your own trading decisions. Indicator
Mean Reversion Pro 📊 Mean Reversion Pro — Data-Driven Edge on Any Market, Any Timeframe
Most mean reversion indicators tell you the price is "too far" from the moving average. This one tells you exactly how far is statistically worth trading — using your own chart's historical data as proof.
Works on all instruments and timeframes: futures (NQ, ES, CL, GC…), crypto (BTC, ETH, SOL…), forex (EUR/USD, GBP/USD…), indices (SPX, DAX, NASDAQ…), stocks, commodities — anything with a price and volume.
─────────────────────────────────────────
🔍 WHAT THIS INDICATOR DOES
─────────────────────────────────────────
Mean Reversion Pro silently analyses every historical instance where price deviated from a moving average by a given distance. For each of 15 tested threshold levels it computes:
• Win rate — % of times price returned to the MA within the timeout
• Expectancy — (win-rate × avg MFE) − (loss-rate × avg MAE)
• Profit Factor — gross gain / gross loss ratio
• Avg MAE — average adverse excursion (how far against you before reverting)
• Avg MFE — average favourable excursion (how far in your favour)
• Avg return time — average bars needed to reach the MA
It then automatically selects the threshold with the highest expectancy that also satisfies your minimum win-rate and minimum occurrences filters — and only then shows a signal. No manual optimisation. No curve-fitting.
─────────────────────────────────────────
⚙️ KEY FEATURES
─────────────────────────────────────────
✅ Universal — works on futures, crypto, forex, indices, stocks, commodities
✅ 3 threshold modes: fixed Points, ATR multiples, Z-Score (adapts to any volatility regime)
✅ 5 MA types: EMA, SMA, WMA, VWMA, Hull MA
✅ Auto-optimised threshold — the indicator finds the best level by itself
✅ Real-time dashboard: win-rate, expectancy, profit factor, MAE, MFE, return time (Long & Short)
✅ Dynamic bands: 1× and 1.5× optimal threshold zones drawn on the chart
✅ Non-repainting signals — only fires on confirmed, closed bars
✅ Optional filters: trend (EMA 50), volume, US session, minimum ATR
✅ Minimum history guard — signals are held until enough bars have been analysed
✅ All parameters fully exposed and documented with tooltips
─────────────────────────────────────────
📈 WHO IS THIS FOR
─────────────────────────────────────────
• Futures traders — NQ, MNQ, ES, MES, CL, GC, SI, ZB…
• Crypto traders — BTC, ETH, SOL and all altcoins on any exchange
• Forex traders — all major, minor and exotic pairs
• Index traders — SPX, NDX, DAX, FTSE, CAC, Nikkei…
• Stock traders and swing traders looking for mean reversion pullbacks
• Prop firm traders who need a systematic, rules-based edge
• Any trader tired of arbitrary support/resistance levels with no statistical backing
─────────────────────────────────────────
🧠 HOW TO USE IT
─────────────────────────────────────────
1. Apply to any chart on any timeframe
2. Let at least 500 bars load (recommended: 1000–2000 for robust statistics)
3. Choose Threshold Mode:
— Points → best for futures and indices (fixed price distances)
— ATR → best for crypto and forex (volatility-adjusted)
— Z-Score → best for statistical/quant approaches
4. Set your minimum Win Rate (default 65%) and minimum Occurrences (default 15)
5. A signal appears only when all statistical conditions are met AND your filters pass
6. Read the dashboard to assess setup quality before entering a trade
─────────────────────────────────────────
💡 WHY EXPECTANCY MATTERS MORE THAN WIN RATE
─────────────────────────────────────────
A strategy with 80% win rate can still lose money if the average loss is 5× the average win. Mean Reversion Pro uses expectancy — the only metric that combines win rate, average gain and average loss into a single number — as its selection criterion. A signal only appears when the math is in your favour.
─────────────────────────────────────────
⚠️ DISCLAIMER
─────────────────────────────────────────
This indicator is a decision-support tool only. It does not provide financial advice and does not guarantee future results. Past statistical performance is not indicative of future performance. Always use proper risk management. Indicator
Indicator
Indicator
AG Pro Moving Average Ribbon Stress Meter [AGPro Series]AG Pro Moving Average Ribbon Stress Meter
Overview / What It Does
This indicator is designed to read the internal condition of a moving-average ribbon rather than treating the ribbon as a simple trend overlay. Instead of asking only whether the ribbon is bullish or bearish, it asks a different question: is the ribbon structurally calm, starting to load, becoming strained, or losing internal order.
The script builds a six-line moving-average ribbon, measures how those averages interact with each other, and converts that interaction into a stress framework. The result is a visual map that helps show whether the ribbon is organized, stretched, unstable, or resetting after stress.
In practical terms, the script is built to help users evaluate ribbon quality, internal synchronization, and the degree of structural pressure inside the moving-average stack. It is not intended to forecast future prices, call tops or bottoms, or replace broader market analysis. Its purpose is to organize what the ribbon is doing now and how stable or unstable that structure appears to be.
The chart output combines multiple layers: the ribbon itself, a central stress spine, edge bands, optional stress aura, event labels, and a compact status panel. Together, these elements aim to make the ribbon easier to interpret without requiring the user to manually inspect every moving average line on every bar.
Unique Edge
Many ribbon-style tools focus on directional bias, crossovers, or broad expansion and contraction. This script focuses on internal ribbon stress.
Its main distinction is that it does not treat all ribbon trends as equal. A ribbon can be rising while still carrying internal disagreement. A ribbon can also look compressed or visually clean while underlying alignment, slope behavior, width dynamics, or price stretch are beginning to deteriorate. This script is built to surface those conditions.
The goal is not to reduce the market to a single signal. The goal is to provide a structured visual read on whether the moving-average stack is operating in a calm state, a loaded state, a strained state, or a more unstable condition. That makes it more useful as a workflow tool than as a simple trend-colour overlay.
Another point of differentiation is presentation. The script uses a ribbon-focused visual design so that the user can read internal condition directly from the chart. Focus modes, theme presets, stress spine layering, and a compact panel are included to keep the display informative without turning the chart into a dense dashboard.
Methodology
The script evaluates ribbon condition through five stress components.
1) Order Stress
This measures whether the moving averages are stacked cleanly or whether their order is becoming mixed. Lower stress suggests cleaner structural order. Higher stress suggests more internal disorder.
2) Slope Dispersion Stress
This evaluates how consistently the moving averages are sloping together. When the ribbon lines are moving with similar directional agreement, synchronization is stronger. When their slopes diverge, internal stress rises.
3) Width Instability Stress
This tracks whether the ribbon width is behaving in a stable or unstable way. A ribbon can widen in an orderly way or in a more erratic way. This component attempts to distinguish between those conditions.
4) Curvature Stress
This evaluates bending in the ribbon core. Strong changes in ribbon curvature may indicate increasing internal pressure or transition.
5) Price Stretch Stress
This measures how far price is moving from the ribbon core relative to ribbon width and ATR-based normalization. This is not a directional claim. It is a structure-based distance measure.
These components are weighted and blended into a smoothed Stress Score. That score then feeds the state engine.
Primary states include Calm, Loaded, Strained, Critical, Fractured, and Recovery. The panel and visual styling use those states to summarize the ribbon condition at the current bar.
Signals & Alerts
This script is built around state transitions and structural events rather than buy/sell promises.
Depending on settings, users may see event labels and alerts such as:
Stress Build
Shows that stress has crossed into an early loading phase.
Strained
Shows that the ribbon has moved into a more stressed internal state.
Critical Load
Highlights a higher-pressure condition where instability has become more meaningful.
Ribbon Fracture
Marks a stronger structural failure condition when stress and ribbon order deterioration align.
Stress Reset
Shows that a previously elevated stress condition has cooled enough to register recovery.
Order Restored
Highlights improvement in ribbon order after disorder had been present.
These events are not trade instructions. They are context markers intended to help users track shifts in ribbon condition. Alerts should be interpreted together with market structure, timeframe context, volatility, and personal risk management.
Key Inputs
Source and MA Type
The ribbon can be built from different moving-average types and data sources.
Ribbon Lengths
Users can define the six ribbon lengths to fit their preferred structure and timeframe.
Stress Engine Inputs
ATR length, slope lookback, width lookback, curvature lookback, smoothing, and component references allow users to calibrate how sensitive the stress model should be.
Weights
The script includes separate weights for order stress, slope dispersion, width instability, curvature stress, and price stretch stress.
Thresholds
Loaded, Strained, Critical, and Fracture thresholds can be adjusted for tighter or looser state transitions.
Theme Presets and Focus Mode
Theme presets and focus modes allow the ribbon to be displayed in different visual styles while preserving the same logic.
Events and Panel
Users can control label density, label spacing, marker visibility, and panel position.
Limitations & Transparency
This script is an interpretation framework built around moving-average relationships. It does not know future price movement, and it does not claim certainty. Like any model built on smoothed market data, it will react more slowly in some environments and may produce fewer useful transitions in others.
Different assets and timeframes can produce different ribbon personalities. A threshold or weight set that feels balanced on one market may feel too sensitive or too quiet on another. Users should expect to adapt settings if they move between instruments with very different volatility or trend behavior.
The stress model is also deliberately selective. It does not try to label every fluctuation or classify every candle. Its purpose is to organize ribbon condition, not to describe every possible market state.
This indicator should also not be confused with a complete trading plan. It does not define entries, exits, position sizing, or account risk. It is best used as a structural context tool inside a broader workflow.
Risk Disclosure
This script is for chart analysis and educational use. It is not financial advice, investment advice, or a promise of outcome.
No indicator can guarantee performance, remove risk, or eliminate false readings. Market conditions change, correlations shift, and trend behavior can weaken or reverse without warning. Any decision taken from this script should be made within a broader framework that includes price structure, liquidity, volatility, timeframe alignment, and risk control.
Users are responsible for testing settings, understanding the limitations of moving-average tools, and deciding whether the information produced by the script fits their own process.
Indicator
Indicator
Indicator
Price per m2 Argentina CABA USD/m2 - SMAs (1999-2025)Overview
This indicator plots the historical USD price per square meter of apartments in CABA (Buenos Aires City), Argentina, combining annual data (1999–2011) with monthly data (2012–2025) to reconstruct a long-term residential real estate pricing series.
All values were manually digitized, cleaned, and consolidated from public reports and market datasets to create a continuous analytical framework for historical valuation analysis.
The script also includes SMA20, SMA50, and SMA100 calculated over the custom dataset to support long-term trend analysis, cycle identification, and macro structural evaluation.
Data Sources
1999–2011 (Annual): Maure Real Estate Market Reports
2012–2020 (Monthly): UCEMA Real Estate Index
2020–2025 (Monthly): RE/MAX – UCEMA Market Monitor
All datasets referenced are derived from publicly available reports and institutional publications.
How to Use This Indicator
*USE ON THE 1 MONTH TIMEFRAME*
This tool enables investors, developers, and market analysts to:
• Identify multi-year trend shifts in residential real estate valuations
• Compare pricing cycles against Argentine macroeconomic environments
• Map long-term support and resistance zones
• Detect early signs of market recovery or contraction
• Integrate real estate fundamentals with technical analysis frameworks
The moving averages help visualize structural trends that are typically less observable in traditional property datasets.
About This Work
This historical series was reconstructed and coded by Engineer Francisco Michelich through the consolidation of market research, statistical normalization, and technical analysis methodologies.
This script does not represent an official financial index and is not affiliated with the original data institutions. It is intended solely as an educational and analytical tool for visualizing long-term trends in the Buenos Aires, Argentina residential real estate market. Indicator
Indicator
Strategy: HMA 50 + Supertrend SniperHMA 50 + Supertrend Confluence Strategy (Trend Following with Noise Filtering)
Description:
Introduction and Concept This strategy is designed to solve a common problem in trend-following trading: Lag vs. False Signals. Standard Moving Averages often lag too much, while price action indicators can generate false signals during choppy markets. This script combines the speed of the Hull Moving Average (HMA) with the volatility-based filtering of the Supertrend indicator to create a robust "Confluence System."
The primary goal of this script is not just to overlay two indicators, but to enforce a strict rule where a trade is only taken when Momentum (HMA) and Volatility Direction (Supertrend) are in perfect agreement.
Why this combination? (The Logic Behind the Mashup)
Hull Moving Average (HMA 50): We use the HMA because it significantly reduces lag compared to SMA or EMA by using weighted calculations. It acts as our primary Trend Direction detector. However, HMA can be too sensitive and "whipsaw" during sideways markets.
Supertrend (ATR-based): We use the Supertrend (Factor 3.0, Period 10) as our Volatility Filter. It uses Average True Range (ATR) to determine the significant trend boundary.
How it Works (Methodology) The strategy uses a boolean logic system to filter out low-quality trades:
Bullish Confluence: The HMA must be rising (Slope > 0) AND the Close Price must be above the Supertrend line (Uptrend).
Bearish Confluence: The HMA must be falling (Slope < 0) AND the Close Price must be below the Supertrend line (Downtrend).
The "Choppy Zone" (Noise Filter): This is a unique feature of this script. If the HMA indicates one direction (e.g., Rising) but the Supertrend indicates the opposite (e.g., Downtrend), the market is considered "Choppy" or indecisive. In this state, the script paints the candles or HMA line Gray and exits all positions (optional setting) to preserve capital.
Visual Guide & Signals To make the script easy to interpret for traders who do not read Pine Script, I have implemented specific visual cues:
Green Cross (+): Indicates a LONG entry signal. Both HMA and Supertrend align bullishly.
Red Cross (X): Indicates a SHORT entry signal. Both HMA and Supertrend align bearishly.
Thick Line (HMA): The main line changes color based on the trend.
Green: Bullish Confluence.
Red: Bearish Confluence.
Gray: Divergence/Choppy (No Trade Zone).
Thin Step Line: This is the Supertrend line, serving as your dynamic Trailing Stop Loss.
Strategy Settings
HMA Length: Default is 50 (Mid-term trend).
ATR Factor/Period: Default is 3.0/10 (Standard for trend catching).
Exit on Choppy: A toggle switch allowing users to decide whether to hold through noise or exit immediately when indicators disagree.
Risk Warning This strategy performs best in trending markets (Forex, Crypto, Indices). Like all trend-following systems, it may experience drawdown during prolonged accumulation/distribution phases. Please backtest with your specific asset before using it with real capital. Strategy
Indicator
AllMA Trend Radar [trade_lexx]📈 AllMA Trend Radar is your universal trend analysis tool!
📊 What is AllMA Trend Radar?
AllMA Trend Radar is a powerful indicator that uses various types of Moving Averages (MA) to analyze trends and generate trading signals. The indicator allows you to choose from more than 30 different types of moving averages and adjust their parameters to suit your trading style.
💡 The main components of the indicator
📈 Fast and slow moving averages
The indicator uses two main lines:
- Fast MA (blue line): reacts faster to price changes
- Slow MA (red line): smoother, reflects a long-term trend
The combined use of fast and slow MA allows you to get trend confirmation and entry/exit points from the market.
🔄 Wide range of moving averages
There are more than 30 types of moving averages at your disposal:
- SMA: Simple moving average
- EMA: Exponential moving average
- WMA: Weighted moving average
- DEMA: double exponential MA
- TEMA: triple exponential MA
- HMA: Hull Moving Average
- LSMA: Moving average of least squares
- JMA: Eureka Moving Average
- ALMA: Arnaud Legoux Moving Average
- ZLEMA: moving average with zero delay
- And many others!
🔍 Indicator signals
1️⃣ Fast 🆚 Slow MA signals (intersection and ratio of fast and slow MA)
Up/Down signals (intersection)
- Buy (Up) signal:
- What happens: the fast MA crosses the slow MA from bottom to top
- What does the green triangle with the "Buy" label under the candle look
like - What does it mean: a likely upward trend reversal or an uptrend strengthening
- Sell signal (Down):
- What happens: the fast MA crosses the slow MA from top to bottom
- What does it look like: a red triangle with a "Sell" mark above the candle
- What does it mean: a likely downtrend reversal or an increase in the downtrend
Greater/Less signals (ratio)
- Buy signal (Greater):
- What happens: the fast MA becomes higher than the slow MA
- What does it look like: a green triangle with a "Buy" label under the candle
- What does it mean: the formation or confirmation of an uptrend
- Sell signal (Less):
- What happens: the fast MA becomes lower than the slow MA
- What does it look like: a red triangle with a "Sell" mark above the candle
- What does it mean: the formation or confirmation of a downtrend
2️⃣ Signals ⚡️ Fast MA (fast MA and price)
Up/Down signals (intersection)
- Buy signal (Up Fast):
- What happens: the price crosses the fast MA from bottom to top
- What does it look like: a green triangle with a "Buy" label under the candle
- What does it mean: a short-term price growth signal
- Sell signal (Down Fast):
- What happens: the price crosses the fast MA from top to bottom
- What does it look like: a red triangle with a "Sell" label above the candle
- What does it mean: a short-term price drop signal
Greater/Less signals (ratio)
- Buy signal (Greater Fast):
- What happens: the price is getting higher than the fast MA
- What does it look like: a green triangle with a "Buy" label under the candle
- What does it mean: the price is above the fast MA, which indicates an upward movement
- Sell signal (Less Fast):
- What happens: the price is getting lower than the fast MA
- What does it look like: a red triangle with a "Sell" mark above the candle
- What does it mean: the price is under the fast MA, which indicates a downward movement
3️⃣ Signals 🐢 Slow MA (slow MA and price)
Up/Down signals (intersection)
- Buy signal (Up Slow):
- What happens: the price crosses the slow MA from bottom to top
- What does it look like: a green triangle with a "Buy" label under the candle
- What does it mean: a potential medium-term upward trend reversal
- Sell signal (Down Slow):
- What happens: the price crosses the slow MA from top to bottom
- What does it look like: a red triangle with a "Sell" label above the candle
- What does it mean: a potential medium-term downward trend reversal
Greater/Less signals (ratio)
- Buy signal (Greater Slow):
- What happens: the price is getting above the slow MA
- What does it look like: a green triangle with a "Buy" label under the candle
- What does it mean: the price is above the slow MA, which indicates a strong upward movement
- Sell signal (Less Slow):
- What is happening: the price is getting below the slow MA
- What does it look like: a red triangle with a "Sell" mark above the candle
- What does it mean: the price is under the slow MA, which indicates a strong downward movement
🛠 Filters to filter out false signals
1️⃣ Minimum distance between the signals
- What it does: sets the minimum number of candles between signals of the same type
- Why it is needed: it prevents the appearance of too frequent signals, especially during periods of high volatility
- How to set it up: Set a different value for each signal type (default: 3-5 bars)
- Example: if the value is 3 for Up/Down signals, after the buy signal appears, the next buy signal may appear no earlier than 3 bars later
2️⃣ Advanced indicator filters
🔍 RSI Filter
- What it does: Checks the Relative Strength Index (RSI) value before generating a signal
- Why it is needed: it helps to avoid countertrend entries and catch reversal points
- How to set up:
- For buy signals (🔋 Buy): set the RSI range, usually in the oversold zone (for example, 1-30)
- For sell signals (🪫 Sell): set the RSI range, usually in the overbought zone (for example, 70-100)
- Example: if the RSI = 25 (in the range 1-30), the buy signal will be confirmed
📊 MFI Filter (Cash Flow Index)
- What it does: analyzes volumes and the direction of price movement
- Why it is needed: confirms signals with data on the activity of cash flows
- How to set up:
- For buy signals (🔋 Buy): set the MFI range in the oversold zone (for example, 1-25)
- For sell signals (🪫 Sell): set the MFI range in the overbought zone (for example, 75-100)
- Example: if MFI = 80 (in the range of 75-100), the sell signal will be confirmed
📈 Stochastic Filter
- What it does: analyzes the position of the current price relative to the price range
- Why it is needed: confirms signals based on overbought/oversold conditions
- How to configure:
- You can configure the K Length, D Length and Smoothing parameters
- For buy signals (🔋 Buy): set the stochastic range in the oversold zone (for example, 1-20)
- For sell signals (🪫 Sell): set the stochastic range in the overbought zone (for example, 80-100)
- Example: if stochastic = 15 (is in the range of 1-20), the buy signal will be confirmed
🔌 Connecting to trading strategies
The indicator provides various connectors to connect to your trading strategies.:
1️⃣ Individual connectors for each type of signal
- 🔌Fast vs Slow Up/Down MA Signal🔌: signals for the intersection of fast and slow MA
- 🔌Fast vs Slow Greater/Less MA Signal🔌: signals of the ratio of fast and slow MA
- 🔌Fast Up/Down MA Signal🔌: signals of the intersection of price and fast MA
- 🔌Fast Greater/Less MA Signal🔌: signals of the ratio of price and fast MA
- 🔌Slow Up/Down MA Signal🔌: signals of the intersection of price and slow MA
- 🔌Slow Greater/Less MA Signal🔌: Price versus slow MA signals
2️⃣ Combined connectors
- 🔌Combined Up/Down MA Signal🔌: combines all the crossing signals (Up/Down)
- 🔌Combined Greater/Less MA Signal🔌: combines all the signals of the ratio (Greater/Less)
- 🔌Combined All MA Signals🔌: combines all signals (Up/Down and Greater/Less)
❗️ All connectors return values:
- 1: buy signal
- -1: sell signal
- 0: no signal
📚 How to start using AllMA Trend Radar
1️⃣ Selection of types of moving averages
- Add an indicator to the chart
- Select the type and period for the fast MA (default: DEMA with a period of 14)
- Select the type and period for the slow MA (default: SMA with a period of 14)
- Experiment with different types of MA to find the best combination for your trading style
2️⃣ Signal settings
- Turn on the desired signal types (Up/Down, Greater/Less)
- Set the minimum distance between the signals
- Activate and configure the necessary filters (RSI, MFI, Stochastic)
3️⃣ Checking on historical data
- Analyze how the indicator works based on historical data
- Pay attention to the accuracy of the signals and the presence of false alarms
- Adjust the settings if necessary
4️⃣ Introduction to the trading strategy
- Decide which signals will be used to enter the position.
- Determine which signals will be used to exit the position.
- Connect the indicator to your trading strategy through the appropriate connectors
🌟 Practical application examples
Scalping strategy
- Fast MA: TEMA with a period of 8
- Slow MA: EMA with a period of 21
- Active signals: Fast MA Up/Down
- Filters: RSI (range 1-40 for purchases, 60-100 for sales)
- Signal spacing: 3 bars
Strategy for day trading
- Fast MA: TEMA with a period of 10
- Slow MA: SMA with a period of 20
- Active signals: Fast MA Up/Down and Fast vs Slow Greater/Less
- Filters: MFI (range 1-25 for purchases, 75-100 for sales)
- Signal spacing: 5 bars
Swing Trading Strategy
- Fast MA: DEMA with a period of 14
- Slow MA: VWMA with a period of 30
- Active signals: Fast vs Slow Up/Down and Slow MA Greater/Less
- Filters: Stochastic (range 1-20 for purchases, 80-100 for sales)
- Signal spacing: 8 bars
A strategy for positional trading
- Fast MA: HMA with a period of 21
- Slow MA: SMA with a period of 50
- Active signals: Slow MA Up/Down and Fast vs Slow Greater/Less
- Filters: RSI and MFI at the same time
- The distance between the signals: 10 bars
💡 Tips for using AllMA Trend Radar
1. Select the types of MA for market conditions:
- For trending markets: DEMA, TEMA, HMA (fast MA)
- For sideways markets: SMA, WMA, VWMA (smoothed MA)
- For volatile markets: KAMA, AMA, VAMA (adaptive MA)
2. Combine different types of signals:
- Up/Down signals work better when moving from a sideways trend to a directional
one - Greater/Less signals are optimal for fixing a stable trend
3. Use filters effectively:
- The RSI filter works great in trending markets
- MFI filter helps to confirm the strength of volume movement
- Stochastic filter works well in lateral ranges
4. Adjust the minimum distance between the signals:
- Small values (2-3 bars) for short-term trading
- Average values (5-8 bars) for medium-term trading
- Large values (10+ bars) for long-term trading
5. Use combination connectors:
- For more reliable signals, connect the indicator through the combined connectors
💰 With the AllMA Trend Radar indicator, you get a universal trend analysis tool that can be customized for any trading style and timeframe. The combination of different types of moving averages and advanced filters allows you to significantly improve the accuracy of signals and the effectiveness of your trading strategy! Indicator
Moving Average Shift WaveTrend StrategyMoving Average Shift WaveTrend Strategy
🧭 Overview
The Moving Average Shift WaveTrend Strategy is a trend-following and momentum-based trading system designed to be overlayed on PulseWire charts. It executes trades based on the confluence of multiple technical conditions—volatility, session timing, trend direction, and oscillator momentum—to deliver logical and systematic trade entries and exits.
🎯 Strategy Objectives
Enter trades aligned with the prevailing long-term trend
Exit trades on confirmed momentum reversals
Avoid false signals using session timing and volatility filters
Apply structured risk management with automatic TP, SL, and trailing stops
⚙️ Key Features
Selectable MA types: SMA, EMA, SMMA (RMA), WMA, VWMA
Dual-filter logic using a custom oscillator and moving averages
Session and volatility filters to eliminate low-quality setups
Trailing stop, configurable Take Profit / Stop Loss logic
“In-wave flag” prevents overtrading within the same trend wave
Visual clarity with color-shifting candles and entry/exit markers
📈 Trading Rules
✅ Long Entry Conditions:
Price is above the selected MA
Oscillator is positive and rising
200-period EMA indicates an uptrend
ATR exceeds its median value (sufficient volatility)
Entry occurs between 09:00–17:00 (exchange time)
Not currently in an active wave
🔻 Short Entry Conditions:
Price is below the selected MA
Oscillator is negative and falling
200-period EMA indicates a downtrend
All other long-entry conditions are inverted
❌ Exit Conditions:
Take Profit or Stop Loss is hit
Opposing signals from oscillator and MA
Trailing stop is triggered
🛡️ Risk Management Parameters
Pair: ETH/USD
Timeframe: 4H
Starting Capital: $3,000
Commission: 0.02%
Slippage: 2 pips
Risk per Trade: 2% of account equity (adjustable)
Total Trades: 224
Backtest Period: May 24, 2016 — April 7, 2025
Note: Risk parameters are fully customizable to suit your trading style and broker conditions.
🔧 Trading Parameters & Filters
Time Filter: Trades allowed only between 09:00–17:00 (exchange time)
Volatility Filter: ATR must be above its median value
Trend Filter: Long-term 200-period EMA
📊 Technical Settings
Moving Average
Type: SMA
Length: 40
Source: hl2
Oscillator
Length: 15
Threshold: 0.5
Risk Management
Take Profit: 1.5%
Stop Loss: 1.0%
Trailing Stop: 1.0%
👁️ Visual Support
MA and oscillator color changes indicate directional bias
Clear chart markers show entry and exit points
Trailing stops and risk controls are transparently managed
🚀 Strategy Improvements & Uniqueness
In-wave flag avoids repeated entries within the same trend phase
Filtering based on time, volatility, and trend ensures higher-quality trades
Dynamic high/low tracking allows precise trailing stop placement
Fully rule-based execution reduces emotional decision-making
💡 Inspirations & Attribution
This strategy is inspired by the excellent concept from:
ChartPrime – “Moving Average Shift”
It expands on the original idea with advanced trade filters and trailing logic.
Source reference:
📌 Summary
The Moving Average Shift WaveTrend Strategy offers a rule-based, reliable approach to trend trading. By combining trend and momentum filters with robust risk controls, it provides a consistent framework suitable for various market conditions and trading styles.
⚠️ Disclaimer
This script is for educational purposes only. Trading involves risk. Always use proper backtesting and risk evaluation before applying in live markets. Strategy
MTF Signal XpertMTF Signal Xpert – Detailed Description
Overview:
MTF Signal Xpert is a proprietary, open‑source trading signal indicator that fuses multiple technical analysis methods into one cohesive strategy. Developed after rigorous backtesting and extensive research, this advanced tool is designed to deliver clear BUY and SELL signals by analyzing trend, momentum, and volatility across various timeframes. Its integrated approach not only enhances signal reliability but also incorporates dynamic risk management, helping traders protect their capital while navigating complex market conditions.
Detailed Explanation of How It Works:
Trend Detection via Moving Averages
Dual Moving Averages:
MTF Signal Xpert computes two moving averages—a fast MA and a slow MA—with the flexibility to choose from Simple (SMA), Exponential (EMA), or Hull (HMA) methods. This dual-MA system helps identify the prevailing market trend by contrasting short-term momentum with longer-term trends.
Crossover Logic:
A BUY signal is initiated when the fast MA crosses above the slow MA, coupled with the condition that the current price is above the lower Bollinger Band. This suggests that the market may be emerging from a lower price region. Conversely, a SELL signal is generated when the fast MA crosses below the slow MA and the price is below the upper Bollinger Band, indicating potential bearish pressure.
Recent Crossover Confirmation:
To ensure that signals reflect current market dynamics, the script tracks the number of bars since the moving average crossover event. Only crossovers that occur within a user-defined “candle confirmation” period are considered, which helps filter out outdated signals and improves overall signal accuracy.
Volatility and Price Extremes with Bollinger Bands
Calculation of Bands:
Bollinger Bands are calculated using a 20‑period simple moving average as the central basis, with the upper and lower bands derived from a standard deviation multiplier. This creates dynamic boundaries that adjust according to recent market volatility.
Signal Reinforcement:
For BUY signals, the condition that the price is above the lower Bollinger Band suggests an undervalued market condition, while for SELL signals, the price falling below the upper Bollinger Band reinforces the bearish bias. This volatility context adds depth to the moving average crossover signals.
Momentum Confirmation Using Multiple Oscillators
RSI (Relative Strength Index):
The RSI is computed over 14 periods to determine if the market is in an overbought or oversold state. Only readings within an optimal range (defined by user inputs) validate the signal, ensuring that entries are made during balanced conditions.
MACD (Moving Average Convergence Divergence):
The MACD line is compared with its signal line to assess momentum. A bullish scenario is confirmed when the MACD line is above the signal line, while a bearish scenario is indicated when it is below, thus adding another layer of confirmation.
Awesome Oscillator (AO):
The AO measures the difference between short-term and long-term simple moving averages of the median price. Positive AO values support BUY signals, while negative values back SELL signals, offering additional momentum insight.
ADX (Average Directional Index):
The ADX quantifies trend strength. MTF Signal Xpert only considers signals when the ADX value exceeds a specified threshold, ensuring that trades are taken in strongly trending markets.
Optional Stochastic Oscillator:
An optional stochastic oscillator filter can be enabled to further refine signals. It checks for overbought conditions (supporting SELL signals) or oversold conditions (supporting BUY signals), thus reducing ambiguity.
Multi-Timeframe Verification
Higher Timeframe Filter:
To align short-term signals with broader market trends, the script calculates an EMA on a higher timeframe as specified by the user. This multi-timeframe approach helps ensure that signals on the primary chart are consistent with the overall trend, thereby reducing false signals.
Dynamic Risk Management with ATR
ATR-Based Calculations:
The Average True Range (ATR) is used to measure current market volatility. This value is multiplied by a user-defined factor to dynamically determine stop loss (SL) and take profit (TP) levels, adapting to changing market conditions.
Visual SL/TP Markers:
The calculated SL and TP levels are plotted on the chart as distinct colored dots, enabling traders to quickly identify recommended exit points.
Optional Trailing Stop:
An optional trailing stop feature is available, which adjusts the stop loss as the trade moves favorably, helping to lock in profits while protecting against sudden reversals.
Risk/Reward Ratio Calculation:
MTF Signal Xpert computes a risk/reward ratio based on the dynamic SL and TP levels. This quantitative measure allows traders to assess whether the potential reward justifies the risk associated with a trade.
Condition Weighting and Signal Scoring
Binary Condition Checks:
Each technical condition—ranging from moving average crossovers, Bollinger Band positioning, and RSI range to MACD, AO, ADX, and volume filters—is assigned a binary score (1 if met, 0 if not).
Cumulative Scoring:
These individual scores are summed to generate cumulative bullish and bearish scores, quantifying the overall strength of the signal and providing traders with an objective measure of its viability.
Detailed Signal Explanation:
A comprehensive explanation string is generated, outlining which conditions contributed to the current BUY or SELL signal. This explanation is displayed on an on‑chart dashboard, offering transparency and clarity into the signal generation process.
On-Chart Visualizations and Debug Information
Chart Elements:
The indicator plots all key components—moving averages, Bollinger Bands, SL and TP markers—directly on the chart, providing a clear visual framework for understanding market conditions.
Combined Dashboard:
A dedicated dashboard displays key metrics such as RSI, ADX, and the bullish/bearish scores, alongside a detailed explanation of the current signal. This consolidated view allows traders to quickly grasp the underlying logic.
Debug Table (Optional):
For advanced users, an optional debug table is available. This table breaks down each individual condition, indicating which criteria were met or not met, thus aiding in further analysis and strategy refinement.
Mashup Justification and Originality
MTF Signal Xpert is more than just an aggregation of existing indicators—it is an original synthesis designed to address real-world trading complexities. Here’s how its components work together:
Integrated Trend, Volatility, and Momentum Analysis:
By combining moving averages, Bollinger Bands, and multiple oscillators (RSI, MACD, AO, ADX, and an optional stochastic), the indicator captures diverse market dynamics. Each component reinforces the others, reducing noise and filtering out false signals.
Multi-Timeframe Analysis:
The inclusion of a higher timeframe filter aligns short-term signals with longer-term trends, enhancing overall reliability and reducing the potential for contradictory signals.
Adaptive Risk Management:
Dynamic stop loss and take profit levels, determined using ATR, ensure that the risk management strategy adapts to current market conditions. The optional trailing stop further refines this approach, protecting profits as the market evolves.
Quantitative Signal Scoring:
The condition weighting system provides an objective measure of signal strength, giving traders clear insight into how each technical component contributes to the final decision.
How to Use MTF Signal Xpert:
Input Customization:
Adjust the moving average type and period settings, ATR multipliers, and oscillator thresholds to align with your trading style and the specific market conditions.
Enable or disable the optional stochastic oscillator and trailing stop based on your preference.
Interpreting the Signals:
When a BUY or SELL signal appears, refer to the on‑chart dashboard, which displays key metrics (e.g., RSI, ADX, bullish/bearish scores) along with a detailed breakdown of the conditions that triggered the signal.
Review the SL and TP markers on the chart to understand the associated risk/reward setup.
Risk Management:
Use the dynamically calculated stop loss and take profit levels as guidelines for setting your exit points.
Evaluate the provided risk/reward ratio to ensure that the potential reward justifies the risk before entering a trade.
Debugging and Verification:
Advanced users can enable the debug table to see a condition-by-condition breakdown of the signal generation process, helping refine the strategy and deepen understanding of market dynamics.
Disclaimer:
MTF Signal Xpert is intended for educational and analytical purposes only. Although it is based on robust technical analysis methods and has undergone extensive backtesting, past performance is not indicative of future results. Traders should employ proper risk management and adjust the settings to suit their financial circumstances and risk tolerance.
MTF Signal Xpert represents a comprehensive, original approach to trading signal generation. By blending trend detection, volatility assessment, momentum analysis, multi-timeframe alignment, and adaptive risk management into one integrated system, it provides traders with actionable signals and the transparency needed to understand the logic behind them. Indicator
Ultra Moving AverageThe Ultra Moving Average is a versatile technical indicator that combines various types of moving averages to analyze trends, providing multi-timeframe insights for traders. It offers four customizable moving averages and a trend strength table for enhanced decision-making.
Introduction
The Ultra Moving Average indicator is a powerful tool designed to help traders track market trends by offering a combination of four distinct moving averages. With flexible customization options, users can apply different types of moving averages like SMA, EMA, TEMA, and many more, across various timeframes. Additionally, it provides trend strength analysis through an intuitive visual table, helping traders quickly identify market conditions.
Detailed Description
.........
Moving Averages
Each of the four moving averages is independently configurable. You can select the timeframe, type, length, color, and width to match your trading strategy.
The types of moving averages range from traditional ones like the Simple Moving Average (SMA) to advanced ones like the Double Expotential Moving Average (DEMA) or the Triple Exponential Moving Average (TEMA) or the Recursive Moving Average (RMA) or the Weigthend Moving Average (WMA) or the Volume Weigthend Moving Average (VWMA) or Hull Moving Average (HMA).
Very Special ones are the Triple Weigthend Moving Average (TWMA) wich created RedKTrader .
I created the Multi Weigthend Moving Average (MWMA) wich is a simple signal line to the TWMA.
.....
Trend Visualization
The indicator uses color-coding to visually represent whether the price is in an uptrend or downtrend. Bullish trends are highlighted in one color, while bearish trends appear in another, making it easy to interpret.
.....
Trend Strength Table
One of the unique features of the Ultra Moving Average is the trend strength table at the bottom of the chart. This table breaks down the strength of the fast, mid, and slow moving averages, displaying them as percentages. It also shows the overall "trend power," which helps assess how strong or weak the current trend is.
You have the option to calculate trends using live data or the previous bar's data, offering flexibility in how the indicator reacts to market changes. This can help traders make more responsive decisions based on real-time trends.
The table displays trend strength across three timeframes Fast, Mid, and Slow by calculating the percentage difference between the price and each of the moving averages (MA1, MA3, MA4).
The Power row shows the average of these percentages, representing overall trend strength.
The percentages are calculated relative to their maximum values in history (limited by PulseWire subscription), providing insight into the trend's strength for each timeframe.
.........
Overall, the Ultra Moving Average indicator is a comprehensive tool that combines multiple moving average types and advanced trend analysis, helping traders identify market direction and strength at a glance. With its intuitive visualization and flexible settings, it's suited for both beginner and experienced traders.
Special Thanks
I use the TWMA-Function created from RedKTrader to smooth the values.
Special thanks to him for creating and sharing this function! Indicator
Indicator
Indicator
