AlgoSentry Opening Range Breakout [Non-Repaint]The Opening Range is the high and low of the first minutes of a session. This indicator maps that range and then tracks the classic Break -> Retest -> Trend sequence that opening-range traders watch — built non-repaint from the ground up.
How it works
Once your opening window closes, the range high and low freeze. From there the script tracks three events:
• Break — the first candle to CLOSE beyond the frozen range, confirmed on the timeframe you choose (chart, 5m, 10m, or 15m). Higher confirmation = fewer fakeouts, later signal.
• Retest — the first pullback that taps an enabled zone: the broken edge, a percent level inside the range, or the session volume Point of Control.
• Trend — the first re-close beyond the range after the retest, marking continuation.
Why non-repaint matters here
Most "breakout" tools look perfect on history because they quietly use future data or redraw as you scroll. This one does not:
• The range freezes at session close and never moves.
• The volume Point of Control is computed once, over a fixed time window — no visible-range tricks, so it never shifts when you scroll or zoom.
• Every signal is committed on bar close.
• Higher-timeframe confirmation is read only after the higher-timeframe candle has closed (lookahead off).
What you saw in real time is what stays on the chart.
Settings
• Opening range session and timezone (default 09:30-09:45, exchange time).
• Confirmation timeframe for the breakout.
• Three retest zones — broken edge, percent of range, and volume Point of Control — each can be toggled on or off.
• Volume POC window: the opening range itself, or the full trading day.
• A compact dashboard shows session state, range size, the live Break/Retest/Trend state, the confirmation timeframe, and the volume POC level.
Every parameter is an input, and every filter can be turned on or off, so you can adapt the tool to your own market and style. It is designed for index futures on intraday charts (1-5 minute), but works on any symbol — validate it on your own instrument and timeframe before relying on it.
A note on honesty
Opening-range breakout is a well-known, widely-published concept. This tool does not invent an edge or promise results — it gives you a clean, disciplined, non-repaint way to see the sequence and study how it actually behaves on your charts.
Educational and informational use only. This is not financial advice, and nothing here is a recommendation to buy or sell. Past or hypothetical behavior does not predict future results. Always test thoroughly before trading. Indicator
Lucky Risk CalculatorLucky Risk Calculator
Know your risk before you pull the trigger — every single time.
Lucky Risk Calculator is a clean, no-nonsense risk management tool built for futures traders. Whether you're trading MNQ, NQ, MES, ES, or any other futures contract, it automatically detects the point value of your instrument and gives you instant dollar risk and profit targets right on your chart — no spreadsheets, no mental math mid-trade.
---
What It Does
Enter your stop distance and number of contracts, and the table instantly shows you:
- **Dollar risk** per contract and for your full position
- **Profit target distance** based on your R:R ratio
- **Dollar profit** at target per contract and full position
- **Auto point value detection** — works on any futures symbol without manual setup
---
How To Use
1. Set your **Stop Distance** (in points) based on where your stop loss is placed
2. Set your **Contracts** — risk and profit scale automatically
3. Set your **R:R Target** — the calculator shows exactly what hitting that target is worth in dollars
4. Move the table to wherever it fits best on your chart
---
Works With
MNQ · NQ · MES · ES · MYM · YM · M2K · RTY — and any other futures contract on PulseWire. Point values are pulled automatically from the symbol, so you never have to touch a setting when switching instruments.
---
Why I Built This
As a futures scalper, I needed to know my exact dollar risk the moment I defined my stop — not after the trade. This tool keeps risk front and center so you trade with discipline, not guesses.
*Trade smart. Manage risk. Stay lucky.*
— LuckyJo Indicator
Index Futures Position Size Calculator V2A simple, free position size calculator for CME index futures traders.
Click Entry, click Stop Loss, pick your asset, get your contract size instantly. Built for fast NY session execution — no spreadsheets, no manual maths, no noise.
This is the updated version. The first release was a bare-bones calculator showing contract size only with a fixed SL buffer. This version is a full rebuild — every feature below came from real trading feedback, not theory.
═══════════════════════════════════
✦ SUPPORTED INSTRUMENTS
MNQ · MES · NQ · ES — all CME tick values hardcoded. No manual lookup, no mistakes.
═══════════════════════════════════
✦ WHAT IS NEW IN THIS VERSION
→ SL buffer is now a toggle — switch the auto ±1 handle offset on or off anytime from settings. When on, the SL label shows +1H so you always know what was calculated
→ Panel now shows four live values — asset, contract size, real USD risk after rounding, and full stop distance in points
→ Direction arrow — ▲ Buy or ▼ Sell auto-detected from your Entry and SL position
→ Panel size control — choose Small, Medium, Large or XL to fit any screen or preference
→ Lines now start exactly at your click point and extend right — no more lines appearing from far left
→ Price labels on both lines — see your exact Entry and adjusted SL price at a glance
→ Ghost line bug fixed — no more phantom line appearing at the bottom when switching timeframes
→ Dark PulseWire-native panel design — colour-coded values, clean two-column layout, easy to read at a glance during live sessions
═══════════════════════════════════
✦ FEATURES
→ One-click Entry and Stop Loss directly on the chart
→ Optional auto ±1 handle SL buffer — structural protection against wick hunts built in
→ Asset dropdown — MNQ, MES, NQ, ES with correct tick value loading automatically
→ Smart rounding — fractional contracts of 0.75 or higher round up, otherwise round down
→ Green Entry line and Red SL line from your exact click, both extending right
→ Live panel updates instantly when you move Entry or SL
═══════════════════════════════════
✦ HOW TO USE
Add to chart → click Entry → click Stop Loss → pick asset → set Account Size and Risk %. Read your size from the top-right panel. Three clicks and you are sized.
═══════════════════════════════════
✦ PROP FIRM CHALLENGE SIZING
Two clean methods to work within your max drawdown limit.
Method 1 — Loss budget split Divide your max loss by how many consecutive losses you can afford. Enter the result as Account Size with Risk at 100%. Example: $2,000 max loss ÷ 5 losses → Account Size $400 · Risk 100%
Method 2 — Direct percentage Enter your full max loss as Account Size and set your per-trade percentage. Example: $2,000 max loss, 20% per trade → Account Size $2,000 · Risk 20%
Both give the same result — use whichever feels natural.
═══════════════════════════════════
✦ A NOTE FROM THE AUTHOR
Built together with Claude AI through real iterative development — every single feature in this indicator exists because a real trade needed it.
This is 100% free and open source. No Discord, no course, no affiliate links, nothing to buy — ever.
You are completely free to copy this, modify it, rename it, improve it and republish it as your own. Seriously — go ahead. If you build something better on top of this, that is exactly the point. Clean tools should be free and open to everyone.
If it helps even one trader size their positions properly and protect their capital, it was worth sharing.
═══════════════════════════════════
✦ DISCLAIMER
Educational tool only. I do not take any responsibility when you use this indicator in your trading — always check the calculations before use. Futures trading carries substantial risk of loss. Not financial advice.
Built with ❤️ by REDz and Claude Indicator
Index Futures Position Size CalculatorA simple, free position size calculator for CME index futures.
Click Entry, click Stop Loss, pick your asset, get your contract size. That's it.
═══════════════════════════════════
✦ SUPPORTED INSTRUMENTS
MNQ • MES • NQ • ES — all CME tick values hardcoded.
═══════════════════════════════════
✦ FEATURES
→ One-click Entry & Stop Loss directly on chart
→ Auto 1-handle SL buffer (protects against wick hunts)
→ Asset dropdown — no manual tick value entry
→ Custom rounding (≥0.75 rounds up, else down)
→ Green Entry / Red SL lines with price labels
→ Clean black-on-white size panel, top right
═══════════════════════════════════
✦ HOW TO USE
Add to chart → click Entry → click Stop Loss
Settings → pick asset, enter Account Size & Risk %
Read your size from the top-right panel
═══════════════════════════════════
✦ TIP
If you're trading a funded challenge, here are two clean ways to use this tool with your max loss limit:
Method 1 — Loss budget split
Decide how many consecutive losses you can take before you're out. Divide your max loss by that number, and use the result as your "Account Size" with Risk % at 100.
Example: $2,000 max loss ÷ 5 losses = $400 per trade
→ Account Size: $400 | Risk %: 100
Method 2 — Direct percentage
Enter your full max loss as Account Size and set Risk % to your per-trade percentage.
Example: $2,000 max loss, risking 20% per trade
→ Account Size: $2,000 | Risk %: 20
Both give the same result — pick whichever feels more natural.
═══════════════════════════════════
✦ A NOTE FROM THE AUTHOR
Built with Claude AI for my own daily trading. Sharing it free because clean tools shouldn't be locked behind paywalls.
100% free. 100% open source. No Discord, no course, no affiliate links, nothing to buy. Copy it, modify it, republish your own version — it's yours.
═══════════════════════════════════
✦ DISCLAIMER
Educational tool only. Not financial advice. Futures trading carries substantial risk of loss. Always verify calculations against your broker's parameters before trading.
Built with ❤️ by REDz & Claude Indicator
Indicator
Indicator
Strategy
Indicator
QQQ and SPY Price Levels [MW]Introduction:
Don’t let SPY and QQQ resistance levels hurt your futures trading anymore. The QQQ and SPY Price Levels indicator automagically provides easily accessible QQQ price levels for NASDAQ-related charts such as QQQ, /NQ and /MNQ futures, and leveraged ETFs such as TQQQ and SQQQ as well as for SPY price levels for S&P 500-related charts such as SPY, /ES and /MES futures, SPX, and leveraged ETFs such as UPRO and SPXU. If you’ve ever traded futures, or anything QQQ- or SPY-related and wanted to know at what price would the corresponding asset reach a key whole number level of QQQ or SPY, like 400, 440, 445, or even 447.50, this tool is for you. Key 10x, 5x, and even 2.5x multiples of QQQ and SPY can act as support or resistance for other related-assets. Until now, there hasn’t been an indicator that can serve as an easy visual cue to know exactly when that is about to happen across assets.
This indicator is a fork of the original SPY Price Levels indicator, which only considered SPY-related assets.
Settings:
QQQ/SPY 2.5x: Show closest levels above and below that are multiples of 2.5 on QQQ
QQQ/SPY 5x: Show closest levels above and below that are multiples of 5 on QQQ
QQQ/SPY 10x: Show closest levels above and below that are multiples of 10 on QQQ
Show QQQ/SPY Price Label: Show the current QQQ/SPY price
Extend lines to the left: Extend label lines for each price level to the beginning of the chart
Calculations:
This indicator defines the ratio between the price of QQQ/SPY and another NASDAQ/S&P-related asset and uses that multiplier once the user-defined price increments are defined. For example, if /MNQ is at 19000 and QQQ is at 465, then the ratio would be 40.8.
The incremental QQQ levels that are above and below the QQQ price are calculated using the following equations:
qqqLevelUp = _multiplier * math.ceil(_qqqClose / _multiplier)
qqqLevelDown = _multiplier * math.floor(_qqqClose / _multiplier)
The conversion ratio is then multiplied by that amount to get the final estimated corresponding price using the calculation:
levelUp := _conversion * qqqLevelUp
levelDown := _conversion * qqqLevelDown
For leveraged assets, the conversion must be used on the difference between the current QQQ price and the incremental upper and lower levels.
For example, the calculation for the next level up looks like the following:
levelUpDelta := math.abs(_qqqClose - qqqLevelUp)
levelUp := close + _conversion * (levelUpDelta * _leverage)
This logic is identical for SPY-related assets.
How to Use:
The QQQ and SPY Price Levels indicator aims to be as unobtrusive as possible. The default view shows 3 labels and 2 lines that are all aligned to the right of the main chart, so that it interferes as little as possible with any other indicators. It can be added to any /NQ or /MNQ futures chart, SQQQ, TQQQ, and, of course, QQQ as well as any /ES /MES futures chart, SPXU, UPRO, SPX, and of course SPY. The most immediate price levels for each multiplier appears above and below the current price along with the price of QQQ/SPY.
For example, MNQU2024 is currently at 19594. By looking at the indicator the next QQQ increment below is at 475, or 19556 on the MNQU2024 chart. This potential support is marked with a green label that shows both prices. The next increment above is at QQQ 477.50, or 19659 on the MESU2024 chart. And the QQQ price itself, is also shown (and can be removed) at 475.92.
QQQ and SPY price increments of 2.5, 5, and 10 tend to consistently act at the very least as emotional support and resistance levels. Weak, or weakening volume and/or momentum when these levels are hit can trigger a strong rejection, and can sometimes precipitate lengthy consolidation periods at those levels. Watching an NASDAQ- and S&P 500-related asset come to a halt, fall off a cliff, or react in some other unintuitive way could very well be the result of a QQQ/SPY level being reached. Even though many of us know that this relationship exists, it’s easy to forget. So, this indicator helps to ensure that its users keep that relationship front and center.
By extending the lines into the past on QQQ/SPY and their related assets, you can see what reactions happened at these key levels.
Other Usage Notes and Limitations:
The calculations used only provide an estimated relationship or a close approximation, and are not exact.
It's important for traders to be aware of the limitations of any indicator and to use them as part of a broader, well-rounded trading strategy that includes risk management, fundamental analysis, and other tools that can help with reducing false signals, determining trend direction, and providing additional confirmation for a trade decision. Diversifying strategies and not relying solely on one type of indicator or analysis can help mitigate some of these risks. Indicator
Indicator
Indicator
