Indicator
DTC Lot Size CalculatorYou set an Entry Price and Stop Price (click-to-place on the chart, or type them in). The script works backward from your risk percentage to tell you exactly how large a position you can take — lot size for forex/CFDs, or whole contracts for futures — so that a stop-out costs exactly what you intended to risk, not more.
It plots Entry, Stop, and R-multiple target lines (1R, 2R, 3R...) directly on the chart, and a compact table shows the full breakdown: risk amount, position size, commission, spread cost, required margin, and the resulting reward:risk ratio.
How the sizing works
Position size is solved from your planned Entry/Stop distance, not a live-recalculated one, so the lot size stays stable and doesn't silently drift every time price ticks. An optional "Reset entry to live price" toggle lets Entry track the current close while Stop stays fixed, so you can watch how a live-tracking price affects real risk without re-plotting manually every time.
True Risk (not just the target risk %) accounts for commission and spread cost, so the number you see is what you'd actually lose, not an idealized figure.
Futures contracts (ES, MES, NQ, MNQ, YM, MYM, RTY, M2K, CL, MCL, NG, GC, MGC, SI, HG, ZB, ZN, ZF, 6E, 6J, 6B, 6A, ZC, ZS, ZW, and CME BTC/ETH) use their real exchange tick size and tick value, and size in whole contracts only, no fractional micros. Spot metals (XAUUSD, XAGUSD, XPTUSD, XPDUSD) use standard 100oz/5000oz/50oz lot conventions matching their COMEX futures equivalents, since these are commonly mispriced by generic calculators.
Built-in safety checks
Risk % turns red with a caution mark above a threshold you set (default 3%). Stop distance turns red with a caution mark if it's unusually wide for a forex pair (default 15 pips). Margin % estimates how much of your account the position would tie up at your configured leverage, and warns if it exceeds 100%, catching cases where a risk-correct position size is still too large for the account to actually hold. A second, independently configurable account/risk table can be shown side by side for comparing two account sizes or risk profiles at once.
Why this is a distinct build, not a re-skin
The original by cryptonnnite was a single-instrument forex lot size calculator. This version adds: multi-asset contract specs (futures + metals), the planned-vs-live entry distinction and its safety fallback, commission+spread-inclusive true risk, the margin/leverage check, configurable warning thresholds, a second comparison account, and the auto dark/light theme system, all new logic layered on top of the original risk-sizing concept.
Indicator
Lot Size Calculator KOANLot Size Calculator KOAN
Calculadora de tamaño de lote para operar CFDs de índices, pensada principalmente para el NAS100/US100. Muestra un panel fijo en el gráfico con el tamaño de lote exacto que debes operar para arriesgar solo el porcentaje o la cantidad de dinero que tú definas.
¿En qué instrumentos funciona?
Funciona en CFDs de índices cotizados en dólares (USD), siempre que configures correctamente el "Valor por punto por lote" según las especificaciones de tu bróker:
NAS100/US100 (Nasdaq 100)
US30 (Dow Jones)
SPX500/US500 (S&P 500)
US2000 (Russell 2000)
No está pensada para pares de forex tradicionales (EURUSD, GBPUSD…), ya que en forex el cálculo se hace en pips y el valor del pip depende del par; para eso existen calculadoras específicas de forex.
¿Cómo funciona?
El indicador calcula: Lot Size = Riesgo en $ / (Stop Loss en puntos × Valor por punto). Por ejemplo, con un balance de $2000, un riesgo del 1% ($20), un stop loss de 50 puntos y un valor de $1 por punto por lote, el resultado es un lote de 0.4. Así, si el precio toca tu stop loss, pierdes exactamente lo que habías decidido arriesgar, ni más ni menos.
Configuración:
Balance (USD): el capital total de tu cuenta. Es la base sobre la que se calcula el riesgo.
Modo de riesgo: elige cómo quieres definir tu riesgo por operación: como porcentaje del balance ("Porcentaje (%)") o como cantidad fija de dinero ("Dinero ($)"). El panel siempre muestra ambos valores, el que introduces y el que se calcula automáticamente.
Riesgo (%): porcentaje del balance que arriesgas por operación. Solo se usa si el modo es "Porcentaje (%)". Por defecto: 1%.
Riesgo ($): cantidad fija en dólares que arriesgas por operación. Solo se usa si el modo es "Dinero ($)".
Stop Loss (puntos): distancia de tu stop loss en puntos del índice. Ajústalo en cada operación según tu análisis.
Valor por punto por lote (USD): cuánto vale 1 punto de movimiento con 1 lote en tu bróker. En la mayoría de CFDs de NAS100 es $1, pero varía según el índice y el bróker. Revisa siempre las especificaciones del contrato (ver notas abajo).
Posición del panel: dónde se ancla el panel en pantalla (6 opciones: arriba/abajo, izquierda/centro/derecha). El panel es fijo: no se mueve al desplazar el gráfico ni al hacer zoom.
Color del panel: color de fondo del panel.
Color del texto: color del texto del panel.
Tamaño: tamaño del texto y del panel (Small, Medium, Large, XL).
Mostrar en el panel: casillas para elegir qué datos aparecen: Símbolo, Balance, Riesgo (%), Stop Loss, Valor por punto, Riesgo en $ y Lot Size. Desmarca lo que no quieras ver y el panel se compacta automáticamente.
Notas importantes sobre el "Valor por punto"
No todos los índices valen $1 por punto. El valor depende del tamaño de contrato de tu bróker. Ejemplo orientativo: en NAS100 suele ser $1 por punto por lote, pero algunos brókers manejan contratos de $10 o incluso $20 por punto, y en índices como el US30 o el SPX500 el tamaño de contrato también puede variar de un bróker a otro.
Cómo averiguar el valor en tu bróker: consulta las "especificaciones del contrato" del instrumento en tu plataforma (busca el dato "contract size" o "tamaño del contrato"). Otra forma práctica: abre una operación mínima en cuenta demo y observa cuántos dólares cambia tu P/L cuando el precio se mueve 1 punto; ese es el valor que debes introducir (escalado a 1 lote).
La definición de "punto" también puede variar entre brókers. Ante la duda, usa siempre el método de la cuenta demo descrito arriba.
Introduce el valor correcto en el campo "Valor por punto por lote (USD)" antes de confiar en el resultado. Si el valor es incorrecto, el tamaño de lote calculado también lo será.
El símbolo mostrado en el panel se detecta automáticamente del gráfico activo.
Este indicador es una herramienta de gestión de riesgo; no genera señales de compra o venta.
Verifica siempre los cálculos con tu bróker antes de operar con dinero real.
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
ENGLISH VERSION
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Lot Size Calculator KOAN
Lot size calculator for trading index CFDs, designed primarily for the NAS100/US100. It displays a fixed panel on the chart showing the exact lot size you should trade to risk only the percentage or dollar amount you define.
Which instruments does it work on?
It works on USD-denominated index CFDs, as long as you correctly set the "Point value per lot" according to your broker's specifications:
NAS100/US100 (Nasdaq 100)
US30 (Dow Jones)
SPX500/US500 (S&P 500)
US2000 (Russell 2000)
It is not designed for traditional forex pairs (EURUSD, GBPUSD…), since forex calculations are done in pips and the pip value depends on the pair; there are dedicated forex calculators for that.
How does it work?
The indicator calculates: Lot Size = Risk in $ / (Stop Loss in points × Point value). For example, with a $2000 balance, 1% risk ($20), a 50-point stop loss and a point value of $1 per lot, the result is a lot size of 0.4. This way, if price hits your stop loss, you lose exactly what you decided to risk — no more, no less.
Settings:
Balance (USD): your total account capital. This is the base used to calculate your risk.
Risk mode: choose how you want to define your risk per trade: as a percentage of your balance ("Porcentaje (%)") or as a fixed dollar amount ("Dinero ($)"). The panel always displays both values — the one you enter and the one calculated automatically.
Risk (%): percentage of your balance risked per trade. Only used when the mode is set to percentage. Default: 1%.
Risk ($): fixed dollar amount risked per trade. Only used when the mode is set to money.
Stop Loss (points): your stop loss distance in index points. Adjust it on every trade according to your analysis.
Point value per lot (USD): how much 1 point of movement is worth with 1 lot at your broker. On most NAS100 CFDs it's $1, but it varies by index and broker. Always check your broker's contract specifications (see notes below).
Panel position: where the panel is anchored on screen (6 options: top/bottom, left/center/right). The panel is fixed — it doesn't move when you scroll or zoom the chart.
Panel color: background color of the panel.
Text color: color of the panel text.
Size: text and panel size (Small, Medium, Large, XL).
Show on panel: checkboxes to choose which data is displayed: Symbol, Balance, Risk (%), Stop Loss, Point value, Risk in $ and Lot Size. Untick what you don't want to see and the panel compacts automatically.
Important notes about "Point value"
Not all indices are worth $1 per point. The value depends on your broker's contract size. As a reference: on NAS100 it's usually $1 per point per lot, but some brokers use contracts of $10 or even $20 per point, and on indices like US30 or SPX500 the contract size can also vary from broker to broker.
How to find the value at your broker: check the instrument's "contract specifications" on your platform (look for "contract size"). A practical alternative: open a minimum-size trade on a demo account and watch how many dollars your P/L changes when price moves 1 point; that's the value you should enter (scaled to 1 lot).
The definition of a "point" can also vary between brokers. When in doubt, always use the demo account method described above.
Enter the correct value in the "Point value per lot (USD)" field before trusting the result. If the value is wrong, the calculated lot size will be wrong too.
The symbol shown on the panel is automatically detected from the active chart.
This indicator is a risk management tool; it does not generate buy or sell signals.
Always verify the calculations with your broker before trading real money. Indicator
0.75% Rule - Trade ProjectionA position-sizing and reward-projection overlay for discretionary traders.
You place an entry and a stop on the chart, and the script returns the
position size that risks a fixed fraction of your account, then projects
your reward targets as R-multiples. Direction (long or short) is inferred
from where you click. The focus is getting currency-correct sizing right
with as little input as possible, and catching the sizing mistakes that
quietly distort risk.
📊 What it does
- Sizes the trade so the entry-to-stop distance equals a fixed percentage
of account equity. Default is 0.75%, a conservative fixed-fractional
risk rule, but the percentage is adjustable.
- Reports the result in the correct unit for the instrument: lots and
units for forex, or contracts/shares sized off point value elsewhere.
- Projects a configurable number of reward targets spaced in R-multiples
(1R, 2R, 3R ...), each labeled with its R-multiple and the reward amount
in your account currency.
- Draws the risk zone (entry to stop) and reward zones, plus an info panel
summarizing account, risk, direction, stop distance, size and R:R.
⚙️ How it works
- Risk amount = account size x risk %. Position size = risk amount /
(stop distance x point value x conversion rate). For forex this is
converted into standard lots.
- Direction is read from the two clicks: a stop below entry is a long,
a stop above entry is a short.
- Instrument detection is automatic (forex, JPY pairs, metals, index,
crypto) via symbol info, with a manual override if you need it.
- Account-to-quote currency conversion is explicit and manual. The
account-currency dropdown is a display label only; the single field
that adjusts lot size is the conversion rate. The panel flags the two
mistakes that actually distort risk: leaving the rate at 1.0 on a
mismatched pair, and applying a non-1.0 rate when the currencies match.
- An optional ATR-based stop can override the clicked stop (length and
multiplier adjustable). Direction still comes from your clicks.
- Repaint-free by construction: no higher-timeframe requests, entry and
stop are static prices, and all drawing is deterministic.
📋 How to use it
1. Add the script. It prompts you to click an entry price, then a stop.
2. Set account size and risk % in settings (default 0.75%).
3. If your account currency differs from the pair's quote currency, enter
the conversion rate (account currency per one unit of quote currency).
The panel warns you when a rate is needed.
4. Read position size, R:R and target levels from the panel and on-chart
labels.
5. For a new setup, open the indicator menu, choose Reset points, then
re-click entry and stop. The Re-arm toggle pauses the current
projection so a stale setup cannot mislead you.
## Notes
- This is a planning and risk-discipline tool, not a signal generator and
not financial advice. It does not place trades.
- For non-forex instruments, sanity-check the point value against your
broker's contract specs before trusting the size.
- Inputs are absolute prices, so after switching symbols you may need to
re-click entry and stop. The script detects an off-scale setup and
prompts you. Indicator
Indicator
Indicator
Indicator
Indicator
Panel Multi-Cuenta con Spread y Tamaño Ajustable📘 Indicator Description: Multi-Account Execution Panel with Spread-Adjusted Risk
This indicator is designed for traders who manage multiple accounts with different capital sizes and execution models—such as a personal account and a prop firm account. It provides a visual panel that calculates and displays the ideal position size for each account, factoring in stop loss, spread, and risk preferences.
🔧 Key Features:
- Manual risk input in USD for the personal account (e.g., $2, $5, $10)
- Percentage-based risk for the prop firm account (e.g., 1% of €5,000)
- Spread-adjusted stop loss for each account, ensuring accurate risk calculation
- Real-time pip value calculation based on the current symbol
- Position size output:
- In units for the personal account
- In standard lots for the prop firm account
- Adjustable table size (Compact, Standard, Extended) to fit your screen and workflow
🧠 Ideal for:
- Traders who execute sequentially across multiple accounts
- Those who want precise, spread-aware sizing without manual calculations
- Discretionary strategies that require visual clarity and execution discipline
Spanish Indicator
XAUUSD Lot Size Calculator + RSI (Yoothobbiz)This indicator is designed for Gold traders on the 5-minute timeframe (M5) who want a clear and editable lot size, stop loss, and take profit calculator directly on their chart.
✨ Features:
📌 Dynamic Lot Size Calculation – based on account capital, chosen risk %, and stop loss distance.
⚖️ Risk/Reward Management – automatically displays TP level using a customizable risk/reward ratio (e.g., 1:2, 1:3, etc.).
🛑 Stop Loss in Points & Price – calculates SL from recent M5 highs/lows, including spread.
🎯 Take Profit in Price & Points – automatically adjusted to your risk/reward ratio.
💵 Risk in USD – instantly shows how much capital is at risk per trade.
🕒 Custom Time Zone Support – displays the real trading time (default UTC-4 for New York), fully editable for any user.
⏱ Timeframe Label – clearly shows the working timeframe (M5 by default).
🎨 Fully Editable Display Panel:
Position (6 corners available).
Font family, size, style (bold/italic).
Text and background colors.
Adjustable spacing between lines.
🔑 How to Use:
Set your capital and risk % in the settings.
Adjust spread (in points) if needed.
Choose your risk/reward ratio.
The panel will display:
Recommended lot size for XAUUSD
Stop loss (price + points)
Take profit (price + ratio)
Risk in $
Timeframe & real-time clock
📍 Notes:
Optimized for XAUUSD (Gold) and the 5M timeframe.
Works on any asset/timeframe, but SL logic is based on M5 candle highs/lows.
Ideal for traders who want a fast and disciplined risk management tool right on their chart. Indicator
The Ultimate Lot Size Calculator Backstory
I created this Pine Script tool to calculate lot sizes with precision. While there are many lot size calculators available on PulseWire, I found that most had significant flaws. I started teaching myself Pine Script over three and a half years ago with the sole purpose of building this tool. My first version was messy and lacked accuracy, so I never published it. I wanted it to be better than any other available tool, but my limited knowledge back then held me back.
Recently, I received a request to create a similar tool, as the current options still fail to deliver the precision and reliability traders need. This inspired me to revisit my original idea. With improved skills and a better understanding of Pine Script, I redesigned the tool from scratch, making it as precise, reliable, and efficient as possible.
This tool features built-in error detection to minimize mistakes and ensure accuracy in lot size calculations. I've spent more time on this project than on any other, focusing on delivering a solution that stands out on PulseWire. While I plan to add more features based on user feedback, the current version is already a powerful, dependable, and easy-to-use tool for traders who value precision and efficiency in their lot size calculations.
How to use the tool ?
At first it might seem complicated, but it is quite easy to use the tool. There are two modes: auto and manual. By default, the tool is set on manual mode. When you apply the tool on the chart, it will ask you to choose the entry price, then the stop-loss price, and at last the take-profit price. Select all of them one by one. These values can be changed later.
Settings
There are various setting given for making the tool as flexible as possible. Here is the explanation for some of most important settings. Play with them and make yourself comfortable.
General settings
Auto mode : Use this mode if you want the the risk reward to be fixed and stop loss to be based on ATR. However the stop loss can be changed to be based on user input.
Manual mode : Use this mode if you want full control over entry, stop loss and take profit.
Contract Size : The tool works perfectly for all forex pairs including gold and silver but as the contract size is different for different assets it is difficult to add every single asset into the script manually so i have provided this option. In case you want to calculate lot size for a asset other then forex, gold or silver make sure to change this. Contract size = Quantity of the asset in 1 standerd lot.
Account settings
Automatic mode settings and ATR stop settings
Manual mode settings
Table and risk-reward box settings are pretty much self-explanatory i guess.
Error handling
A lot size calculator is a complex program. There are numerous points where it may fail and produce incorrect results. To make it robust and accurate, these issues must be addressed and managed properly, which practically all existing lot size calculator scripts fail to do.
Golden tip
When the symbol is changed it will display a symbol change warning as the entry, stop loss and take profit price won't change.
There are 2 ways to get fix this. Either manually enter all three values which i hate the most or remove the script from the chart and re-apply the script on chart again.
So to re-apply the indicator in most easy way follow the following instructions:
Note : If you encounter any other error then read the instruction to fix it and if it is an unknow error pleas report it to me in comments or DM. Indicator
Indicator
BB Position CalculatorPosition Size Calculator Instructions
Overview
The Position Size Calculator is designed to help traders automatically determine the appropriate lot size based on the dollar amount they are willing to risk. It includes features for automatic lot sizing, fixed lot risk calculations, take profit calculations (both automatic and fixed), max run-up, and max drawdown. Calculated values are displayed in ticks, points, and USD.
Key Features
• Automatic Lot Sizing: Automatically calculates lot size based on the amount of money you are willing to risk.
• Fixed Lot Risk Calculations: Provides risk calculations for fixed lot sizes.
• Take Profit Calculations: Offers both automatic and fixed take profit calculations.
• Max Run-Up and Max Drawdown: Monitors and displays the maximum run-up and drawdown of your trade.
• Detailed Metrics: Displays all calculated values in ticks, points, and USD.
Setup Instructions
1. Add and Remove for Each Position: The calculator is designed to be added to your chart for each new position. Once your preferences are set the first time, save them as your default to retain your settings for future use.
2. Adding the Indicator to Favorites:
• Use the PulseWire keyboard shortcut “/” then type “pos.”
• Use the arrow key to select the Position Size Calculator and press enter.
• Close the indicator selection pop-up.
3. Setting the Trigger Price:
• A blue pop-up labeled “SET TRIGGER PRICE” will appear at the bottom of the chart.
• Click on the chart at the price level where you want to enter the trade.
4. Setting the Stop Loss:
• The pop-up will change to “SET STOP LOSS.”
• Click on the chart at the price level where your stop loss will be set.
5. Setting the Take Profit:
• The pop-up will change to “SET TAKE PROFIT.”
• Click on the chart at the price level where you want to take profit. If you have selected the option to overwrite with a set risk/reward ratio (R:R), the calculation will use this price level.
6. Setting the Trade Window Start:
• The pop-up will change to “SET TRADE WINDOW START.”
• Click on the bar in time where you want the indicator to start monitoring for price to trigger the position.
7. Adjusting the Position:
• Clicking on any part of the indicator will display draggable lines, allowing you to fine-tune the position that was previously plotted by the first four chart clicks.
Additional Notes
• Compatibility: This calculator has only been tested with futures trading.
• Customization: Once your preferences are set, save them as your default to make setup quicker for future trades.
• Support: If you have any questions or feature requests, please feel free to reach out.
Indicator
Indicator
Indicator
Position Sizing Tool [Skiploss]The position sizing tool is an indicator to help calculate in trading, such as loss and gain, lots size, and risk-reward ratio.
When you open the indicator, you must select the entry, take profit, and stop-loss points.
Be careful;
The take profit point must be more than the entry point in the long position. On the other hand, it will be a short position.
The stop loss point must be less than the entry point in the long position. On the other hand, it will be a short position.
For contract size, you can find details on MetaTrader, Ctrader, or your broker.
Indicator
Indicator
Indicator
