5 Advanced MAs MTF🔵 OVERVIEW
5 Advanced MAs MTF is a professional moving averages indicator designed for traders who need to see multiple trend layers on a single chart simultaneously, each one with its own independent configuration and — above all — its own timeframe.
Unlike typical "ribbon" or "multi-MA" indicators on the market, which display several averages all computed on the active chart's timeframe, this indicator allows each of the 5 averages to have its own timeframe. You can have your EMA 8 on the 15-minute chart, your EMA 20 on the 1-hour, your EMA 50 on the 4-hour, and your SMA 200 on the daily, all plotted on the same 15-minute chart. That turns the indicator into a complete multi-timeframe control panel without needing to open four separate charts or saturate your installed indicators list.
🔶 KEY FEATURES
• 5 fully independent moving averages — each one configured separately and enabled or disabled individually.
• True multi-timeframe per MA — the core differentiator. Each MA can read its value from a higher, lower, or equal timeframe relative to the active chart. Leave it empty to use the chart's current timeframe.
• 9 moving average types — SMA, EMA, WMA, RMA, HMA, VWMA, TEMA, KAMA, and JMA. The last three (TEMA, KAMA, JMA) are implemented with their original formulas, no shortcuts. JMA uses Mark Jurik's standard defaults (Phase = 50, Power = 2).
• Configurable source per MA — Close, Open, High, Low, hl2, hlc3, ohlc4.
• Full visual styling per MA — color, width (1 to 10), and line style (solid, dashed, or dotted).
• Smart labels — each MA can show its label directly on the line, with configurable content (type, length, timeframe, or any combination of the three). Adjustable horizontal bar offset and text size.
• Interactive summary table — placed at any of the 9 chart anchors, displaying color column, type, length, timeframe, and price distance from each MA (in percentage and absolute value). Toggle to include or exclude hidden MAs.
• 22-alert system — 10 for Price↔MA crosses (bullish and bearish for each MA), 10 for MA↔MA crosses across 5 configurable slots (you pick which MA pairs to monitor), and 2 wildcard "any cross detected" alerts. All compatible with webhooks and automation.
• Works on any market and any timeframe — equities, futures, crypto, forex, commodities. From tick charts to monthly charts.
🔹 USE CASES BY TRADER STYLE
▪️ Day trader / scalper
Configure the first 3 MAs as short EMAs (8, 20, 50) on the chart's timeframe (5m or 15m) and leave MAs 4 and 5 as SMA 200 and VWMA 100 but reading them from a higher timeframe (1H, 4H, or daily). Result: you see your fast entry signals and the higher-timeframe bias at the same time without switching charts.
▪️ Swing trader
Recommended setup: EMA 20 and EMA 50 on the active chart (1H or 4H) + SMA 200 read from daily + VWMA 100 read from weekly. This lets you watch pullbacks against the EMA 20 on your operative timeframe with immediate confirmation that the higher-timeframe bias is aligned, plus the weekly VWMA as a volume-weighted "fair price" reference.
▪️ Position trader / long-term
Enable all 5 MAs on daily or weekly to build a complete structural map of the asset. The default configuration (EMA 8, EMA 20, EMA 50, SMA 200, and VWMA 100, all on daily) covers everything from fast momentum to the institutional level, combining pure-price references (SMA 200) with volume-weighted references (VWMA 100). The summary table shows the exact distance of price from each one.
▪️ Systematic crossover trader
The MA↔MA alert slots let you configure up to 5 specific crossovers simultaneously. Classic Golden Cross / Death Cross setup: Slot 1 with MA 3 (EMA 50) crossing MA 4 (SMA 200) on daily, with an automatic alert sent to your bot's webhook or notification system.
▪️ Multi-timeframe confluence trader
The most differentiating use case. Assign each MA to a different timeframe: MA 1 on 5m, MA 2 on 15m, MA 3 on 1H, MA 4 on 4H, MA 5 on daily or weekly. The summary table shows you in real time the distance of current price from the key level of each of those timeframes. When several MAs from different timeframes converge on the same price zone, that zone becomes a high-density structural level — one of the most-used concepts among institutional traders.
⚙️ INPUTS & CUSTOMIZATION
The entire indicator is 100% configurable from the Inputs panel. Each MA has its own expandable group with 14 controls. The summary table is also fully customizable (position, text size, background/border/text colors). The JMA global parameters (Phase and Power) live in their own section so advanced users can adjust them without cluttering the individual groups.
By default, all 5 MAs are enabled with a configuration tailored for daily and swing use: EMA 8 (blue, 1D), EMA 20 (red, 1D), EMA 50 (yellow, 1D), SMA 200 (green dashed, 1D), and VWMA 100 (pink dotted, 1D). The user can modify any of the parameters or reassign the MAs to other timeframes at any moment.
🔔 ALERTS
The indicator ships with 22 precompiled alerts ready to use:
• 5 alerts "Price crosses above MA N"
• 5 alerts "Price crosses below MA N"
• 10 alerts across 5 configurable slots for MA↔MA crossovers (bullish and bearish per slot)
• 2 wildcard alerts "any cross detected"
All messages include the {{ticker}} and {{close}} placeholders so they are directly parseable by webhooks, bots, and automation systems.
❓ FAQ
Does the indicator repaint?
No. The moving averages are computed on confirmed historical data. Cross alerts fire on the bar of the cross and values are not modified retroactively. To avoid signals that appear and disappear intra-bar, set the alerts to "Once per bar close".
Does it work on any timeframe?
Yes. From tick charts to monthly. In addition, each MA can have its own higher, lower, or equal timeframe relative to the active chart. The default timeframe is the current chart's timeframe.
Why 9 MA types?
Because each type behaves differently. SMA is the pure average; EMA weights recent bars more; HMA virtually eliminates lag; KAMA adapts to volatility; JMA is the smoothest while staying responsive; VWMA weights by volume. Having all of them available lets you use the right tool for each analysis without installing several separate indicators.
What are the 5 MA↔MA alert slots for?
They let you configure specific crossovers between any pair of MAs without having to create all possible combinations. In each slot you pick the fast MA and slow MA from dropdowns and receive alerts for the bullish and bearish crossovers of that pair. Example: Slot 1 = MA 3 crosses MA 4 (classic Golden Cross / Death Cross when MA 3 = EMA 50 and MA 4 = SMA 200).
What is the best MA combination?
There is no single "best" — it depends on the trading style and the asset. The Use Cases section above includes recommended configurations for the 5 most common profiles.
Is it compatible with webhooks and automation?
Yes. The 22 alerts use {{ticker}} and {{close}} placeholders in their messages, making them directly compatible with PulseWire Webhooks, copy-trading platforms, Telegram/Discord bots, and any system that parses JSON.
Is it free to use?
Yes. Open-source indicator under the Mozilla Public License 2.0. You can review the full code, use it freely on PulseWire, and create derivative copies while respecting the license terms.
⚠️ DISCLAIMER
This indicator is a technical analysis tool provided solely for educational and informational purposes. It does not constitute financial advice, an investment recommendation, or an invitation to trade any instrument. Moving averages are reactive (not predictive) indicators: they are based on historical data and, by their nature, can produce delayed signals in markets with sharp trend changes. In ranging or low-volatility market contexts, crossovers can be frequent and not particularly informative. Every trading decision is the sole responsibility of the trader. Past performance does not guarantee future results.
© 2026 Lic. Farias Foresi, Leandro M. — License: Mozilla Public License 2.0
Indicator
AIR Supertrend (Average Interpercentile Range)Supertrend (ST) is a popular stop loss and trend identification script. The simplicity of seeing a clean trend on a chart makes it attractive, yet it is restricted by only allowing the source, length and multiplier to be adjusted, & these tend to have a limited effect on the properties of the identified trend.
There is a wide variety of interesting ST scripts on PulseWire that give the user more control, but none to my knowledge, based on measuring the statistical dispersion of Average Interpercentile Range (AIR).
Two more levels of control:
Normally, ATR Average True Range is used to calculate the range in ST. ATR is initially calculated using RMA to smooth out True Range. This script gives the user the option of changing the MA to some more interesting varieties & modifying their parameters.
The default range setting when you load the indicator on a chart will be AIR.
The real strength of the indicator, however, and the reason I am publishing it, is to release AIR. Play round with the percentile range setting. Lowering it will allow you to stay longer in a trade in a volatile market. Raising it will make it tighter.
For comparison, you can switch back the range setting to ATR and load up RMA to see how the original, classic ST plots.
Alerts are included in this version. Alway use a stop loss.
DISCLAIMER: None of this is financial advice.
Credits to these authors, whose hard work inspired parts of this script:
@ KivancOzbilgic - SuperTrend
@ KioseffTrading - Tillson T3 MA
@ cheatcountry - Hann Window Smoothing
@ mutantdog - Interquartile Range function in his 'Blaze' script Indicator
T3 JMA KAMA VWMAEnhancing Trading Performance with T3 JMA KAMA VWMA Indicator
Introduction
In the dynamic world of trading, staying ahead of market trends and capitalizing on volume-driven opportunities can greatly influence trading performance. To address this, we have developed the T3 JMA KAMA VWMA Indicator, an innovative tool that modifies the traditional Volume Weighted Moving Average (VWMA) formula to increase responsiveness and exploit high-volume market conditions for optimal position entry. This article delves into the idea behind this modification and how it can benefit traders seeking to gain an edge in the market.
The Idea Behind the Modification
The core concept behind modifying the VWMA formula is to leverage more responsive moving averages (MAs) that align with high-volume market activity. Traditional VWMA utilizes the Simple Moving Average (SMA) as the basis for calculating the weighted average. While the SMA is effective in providing a smoothed perspective of price movements, it may lack the desired responsiveness to capitalize on short-term volume-driven opportunities.
To address this limitation, our T3 JMA KAMA VWMA Indicator incorporates three advanced moving averages: T3, JMA, and KAMA. These MAs offer enhanced responsiveness, allowing traders to react swiftly to changing market conditions influenced by volume.
T3 (T3 New and T3 Normal):
The T3 moving average, one of the components of our indicator, applies a proprietary algorithm that provides smoother and more responsive trend signals. By utilizing T3, we ensure that the VWMA calculation aligns with the dynamic nature of high-volume markets, enabling traders to capture price movements accurately.
JMA (Jurik Moving Average):
The JMA component further enhances the indicator's responsiveness by incorporating phase shifting and power adjustment. This adaptive approach ensures that the moving average remains sensitive to changes in volume and price dynamics. As a result, traders can identify turning points and anticipate potential trend reversals, precisely timing their position entries.
KAMA (Kaufman's Adaptive Moving Average):
KAMA is an adaptive moving average designed to dynamically adjust its sensitivity based on market conditions. By incorporating KAMA into our VWMA modification, we ensure that the moving average adapts to varying volume levels and captures the essence of volume-driven price movements. Traders can confidently enter positions during periods of high trading volume, aligning their strategies with market activity.
Benefits and Usage
The modified T3 JMA KAMA VWMA Indicator offers several advantages to traders looking to exploit high-volume market conditions for position entry:
Increased Responsiveness: By incorporating more responsive moving averages, the indicator enables traders to react quickly to changes in volume and capture short-term opportunities more effectively.
Enhanced Entry Timing: The modified VWMA aligns with high-volume periods, allowing traders to enter positions precisely during price movements influenced by significant trading activity.
Improved Accuracy: The combination of T3, JMA, and KAMA within the VWMA formula enhances the accuracy of trend identification, reversals, and overall market analysis.
Comprehensive Market Insights: The T3 JMA KAMA VWMA Indicator provides a holistic view of market conditions by considering both price and volume dynamics. This comprehensive perspective helps traders make informed decisions.
Analysis and Interpretation
The modified VWMA formula with T3, JMA, and KAMA offers traders a valuable tool for analyzing volume-driven market conditions. By incorporating these advanced moving averages into the VWMA calculation, the indicator becomes more responsive to changes in volume, potentially providing deeper insights into price movements.
When analyzing the modified VWMA, it is essential to consider the following points:
Identifying High-Volume Periods:
The modified VWMA is designed to capture price movements during high-volume periods. Traders can use this indicator to identify potential market trends and determine whether significant trading activity is driving price action. By focusing on these periods, traders may gain a better understanding of the market sentiment and adjust their strategies accordingly.
Confirmation of Trend Strength:
The modified VWMA can serve as a confirmation tool for assessing the strength of a trend. When the VWMA line aligns with the overall trend direction, it suggests that the current price movement is supported by volume. This confirmation can provide traders with additional confidence in their analysis and help them make more informed trading decisions.
Potential Entry and Exit Points:
One of the primary purposes of the modified VWMA is to assist traders in identifying potential entry and exit points. By capturing volume-driven price movements, the indicator can highlight areas where market participants are actively participating, indicating potential opportunities for opening or closing positions. Traders can use this information in conjunction with other technical analysis tools to develop comprehensive trading strategies.
Interpretation of Angle and Gradient:
The modified VWMA incorporates an angle calculation and color gradient to further enhance interpretation. The angle of the VWMA line represents the slope of the indicator, providing insights into the momentum of price movements. A steep angle indicates strong momentum, while a shallow angle suggests a slowdown. The color gradient helps visualize this angle, with green indicating bullish momentum and purple indicating bearish momentum.
Conclusion
By modifying the VWMA formula to incorporate the T3, JMA, and KAMA moving averages, the T3 JMA KAMA VWMA Indicator offers traders an innovative tool to exploit high-volume market conditions for optimal position entry. This modification enhances responsiveness, improves timing, and provides comprehensive market insights.
Enjoy checking it out!
---
Credits to:
◾ @cheatcountry – Hann Window Smoothing
◾ @loxx – T3
◾ @everget – JMA Indicator
+ JMA KDJ with RSI OB/OS SignalsSo, what is the KDJ indicator? If you're familiar with the Stochastic, then you'll know that the two oscillating lines are called the 'K' and 'D' lines. Now you know that this is some sort of implementation of the Stochastic. But, then, what is the J? The 'J' is simply the measure of convergence/divergence of the 'K' and 'D' lines, and the 'J' crossing the 'K' and 'D' lines is representational of the 'K' and 'D' lines themselves crossing. Is this an improvement over simply using the Stochastic as it is? Beats me. I don't use the Stochastic. I stumbled upon the KDJ while surfing around the web, and it sounded cool, so I thought I'd look at it. I do like it a bit more as the 'J' line being far overextended from the other two (usually into overbought/sold territory) does give a clear visual representation of the divergence of the 'K' and 'D' lines, which you might not notice otherwise. So, from that perspective I suppose it is nicer.
But let's get to the good stuff now, shall we? What did I do here?
Well, first thing you're wondering is why there are only two lines when based on my explanation (or your previous experience with the indicator) there should be three. I found this script here on TV, by x4random, who took the 'K' and 'D' lines and made an average of them, so there is only one line instead of the two. So, fewer lines on the indicator, but still the same usefulness. It was in older TV code, so I took it to version4 and cleaned up the code slightly. His indicator included the RSI ob/os plots, and I thought this was neat (even though the RSI being os/ob doesn't tell you much except that the trend is strong, and you should be buying pullback or selling rallies) so I kept them in. His indicator was also the most visually appealing one that I saw on here, so that attracted me too. Credit to x4random for the indicator, though.
Aside from code cleanup and adding the usual bells and whistles (which I will get to) the big thing I did here was change is RMA that he was using for the 'K' and 'D' lines to a Jurik MA's, which smooth a lot of the noise of other moving averages while maintaining responsiveness. This eliminates noise (false signals) while keeping the signals of significance. It took me a while to figure out how to substitute the JMA for the RMA, but thanks to QuantTherapy's "Jurik PPO" indicator I was able to nail down the implementation. One thing you might notice is that there is no input to change signal length. I fiddled with this for a time before sticking to using the period, instead of the signal (thus eliminating the use of the signal input altogether), length to generate the 'K' and 'D' calculations. To make any adjustments other than the period length use the Jurik Power input. You can use the phase input as well, but it has much less of an effect.
Everything else I changed is pretty much cosmetic.
Candle coloring with the option to color candles based on either the 'J' line or the 'KD' line.
color.from_gradients with color inputs to make it beautiful (this is probably my best looking indicator, imo)
plots for when crosses occur (really wish there was a way to plot these over candlesticks! If anyone has any suggestions I'd love to see!)
I think that's about it. Alerts of course.
Enjoy!
Below is a comparison chart of my JMA implementation to the original RMA script.
You can see how much smoother the JMA version is. Both of these had the default period of 55 set, and the JMA version is using the default settings, while the original version is using a length of 3 for the signal line.
Indicator
