VOLD Confluence Table [MMT]VOLD Confluence Table is a compact market-internals dashboard that overlays directly on your main chart and summarizes VOLD, ADD, and TICK into a single, tradeable bias signal and day-type read.
What this indicator shows
VOLD : measures whether volume is flowing into advancing or declining stocks on the exchange, giving you the “horsepower” behind the move.
ADD : tracks how many stocks are advancing vs declining, giving a breadth read on participation.
TICK : looks at how many stocks are ticking up vs ticking down right now, acting as a very short-term sentiment and momentum gauge.
All three are pulled into a 3‑column table (Label / Value / Signal) plus rows for VOLD trend vs SMA, day type (Trend / Chop / Responsive), and an overall bias + 0–6 confluence score.
Core logic and signals
Bull/bear scores are built from six binary conditions each (VOLD sign, strong VOLD, ADD sign, strong ADD, TICK sign, TICK momentum levels). When 5+ of the bull (or bear) conditions align, the indicator flags a potential “Trend Day” in that direction; 4 gives “High Confidence” bias, while low scores on both sides classify the session as “Chop.”
A VOLD SMA filter on a higher timeframe (default 5‑min) labels whether VOLD is ABOVE or BELOW its SMA and applies a “freight train” rule: strong expanding VOLD above SMA triggers “🚂 NO SHORT,” strong contracting VOLD below SMA triggers “🚂 NO LONG,” discouraging fades against a powerful breadth/volume trend.
Divergence logic highlights when ADD and VOLD disagree (e.g., ADD bullish while VOLD is negative), which often signals distribution/absorption or unstable internals; these are labeled as divergence with a caution bias.
How to use it intraday
Pre-session / first 30–60 minutes
Watch the BIAS row and score: a quick push to 4–6 on one side with “✦ TREND” TYPE suggests you lean with that side for the day (buy pullbacks in bull trend, sell bounces in bear trend).
Check the SMA row: “🚂 NO SHORT” or “🚂 NO LONG” means avoid fading the index just because it feels extended; treat counter‑trend scalp ideas as lower probability.
During the session
Use the TYPE row:
“✦ TREND” → favor continuation setups, avoid fighting the dominant side.
“✕ CHOP” → stand down on trend assumptions, consider mean‑reversion or smaller size.
“◈ RESPONSIVE” → market is two‑sided; treat both extremes carefully and rely more on local structure.
Watch VOLD Δ (EXPANDING / CONTRACTING / FLAT) to confirm whether a move in your index is being reinforced by broad volume or starting to lose pressure.
Risk and filter use-cases
Use “Chop Detected” / low confluence as a filter to reduce size or skip marginal setups when internals show no clear edge.
Use divergence alerts (ADD vs VOLD) as a reason to tighten risk or take partials if you are heavily positioned and internals stop agreeing with the move.
SMA Filter:
VOLD SMA Length (default 10)
VOLD SMA Timeframe (default 5‑minute)
Shorter lengths or timeframes make the freight-train bias more reactive; longer settings smooth out noise.
Alerts
The script includes alert conditions for key regime shifts so you do not have to stare at the table all day:
Trend Day Bull / Bear (score ≥ 5)
VOLD crossing above/below its SMA (freight train flips)
ADD/VOLD divergence
Chop detected (no edge)
These can be tied to popups, sounds, or webhooks so your automation or discretionary workflow can react when internals meaningfully change state. Indicator
Little Charts Pro [MMT]Little Charts Pro is a compact, multi‑timeframe overlay indicator for PulseWire that lets you embed small “mini‑charts” directly on your main chart, each showing price action, moving averages, CBC flip signals, Fair Value Gaps (FVGs), and order‑block‑style zones. It is designed to give you a quick, multi‑timeframe snapshot of trend, structure, and order‑flow context without cluttering your workspace.
What the indicator does
- Multiple mini‑charts
Displays up to six mini‑charts on the right side of your main chart, each representing a different timeframe (configurable from 5m up to W1).
Each mini‑chart shows candles, background box, and a compact timeframe label, all dynamically sized and positioned based on your layout settings.
- Moving averages & trend
Plots two custom MAs per mini‑chart (type and length configurable: EMA, SMA, WMA, HMA, DEMA, TEMA, SMMA) so you can instantly see trend direction and key dynamic levels on each higher timeframe.
- CBC flip arrows
Shows CBC‑style flip arrows when price closes above a prior high (bullish flip) or below a prior low (bearish flip), only on the state change. Arrows help you spot aggressive breaks in higher‑timeframe structure and changes in momentum.
- Fair Value Gaps (FVGs)
Automatically highlights bullish and bearish FVGs on each mini‑chart, with a user‑set maximum per chart to avoid visual overload. This helps you quickly identify where unfilled gaps in liquidity may attract price later.
- Order blocks (OBs)
Detects simple order‑block‑style zones (e.g., bullish OB when today’s close is above open while previous bar closed below its open) and shades them on the relevant mini‑chart. Labels can be toggled on/off for cleaner or more explicit structure.
Key customization features
- Layout & sizing
You can adjust mini‑chart width in bars, horizontal offset, horizontal gap between charts, overall vertical height scale, and a small vertical buffer percentage so the mini‑charts fit neatly without covering your main price.
- Multi‑timeframe selection
Each of the six mini‑charts can have its own timeframe and bar count (how many candles back to display), letting you mix intraday, daily, and weekly views in one indicator.
- Style & colors
Fully customizable:
Up / down candle colors.
Background and border colors for the mini‑chart boxes.
Text color for labels and MA/FVG/OB colors so the indicator can match your preferred chart theme.
Indicator
Indicator
CBC Engine [MMT]CBC Engine is a Candle-By-Candle (CBC) Flip strategy indicator for PulseWire, specifically optimized for the 3-minute chart with a 10-minute higher-timeframe (HTF) bias.
It is based on the CBC Flip method originally popularized by MapleStax . The core idea is simple yet powerful: a new directional bias is established the moment price closes beyond the previous candle’s extreme.
Core Logic – CBC Flip
Bullish Flip (Long) : Current candle closes above the previous candle’s High
Bearish Flip (Short) : Current candle closes below the previous candle’s Low
If neither happens, the previous CBC state persists (no new flip).
Strong Flip (optional, higher accuracy):
Long : Price first sweeps below the previous low (liquidity grab), then closes above the previous high.
Short : Price first sweeps above the previous high, then closes below the previous low.
Key Filters & Enhancements
1. Trend Environment (EMA + VWAP)
Longs are only allowed when the Slow EMA > VWAP (bullish environment)
Shorts are only allowed when the Slow EMA < VWAP (bearish environment)
You can also display a Pullback EMA for extra context.
2. Dual Timeframe Bias (3m + 10m)
The 10-minute chart provides the overall bias using its own CBC state.
Primary rule: Only take 3m flips that align with the 10m CBC bias.
Bounce Override (very useful): If the 3m flip goes against the 10m bias, it can still fire only if price bounces off the 10m EMA band (Fast & Slow EMA) while that band is trending in the direction of the trade.
3. Stop Loss Logic
Long SL = Lowest low of the last N candles (default N=2)
Short SL = Highest high of the last N candles
The SL is plotted on the chart and tracked internally. The position is invalidated if price closes beyond the SL.
Visual & Usability Features
- Background Coloring : Shows the current 10m HTF bias (green = bullish, red = bearish, gray = neutral).
- EMA Cloud : Filled areas between 9/13 and 13/21 EMAs to visualize trend strength and pullbacks.
- VWAP : Session-anchored VWAP with customizable style.
- Signals :
Main aligned signals → Lime ▲ LONG or Red ▼ SHORT labels with SL level.
Bounce overrides → Blue ▲ BOUNCE or Orange ▼ REJECT labels.
Weak flips (when “Show ALL Flip Arrows” is on) → small faint triangles for context.
- Dashboard : Shows 10m Bias, 3m State, EMA/VWAP environment, Current Position (Main or Bounce), Stop Loss, and Mode (Strong Flip vs All Flips).
- Session Filter : Optional intraday session (default 09:30–16:00).
Best Use Case
Primary setup : 3-minute chart for entries + 10-minute for bias.
Works best in trending markets where the HTF bias is clear.
The bounce override makes it more flexible in choppy or ranging conditions by allowing counter-bias entries when price respects the HTF EMA band.
“Strong Flips Only” mode significantly reduces noise but gives fewer signals.
Indicator
Denial [MMT]Denial is a reversal signal indicator designed to help traders identify Morning Star and Evening Star patterns when price attempts to continue in one direction, fails, and turns back the other way.
How to use this indicator
Use Denial to scan for potential reversal points after an impulsive move. The indicator looks for a 3-candle structure: a strong first candle, a small-bodied star candle, and a confirmation candle that closes back into the first candle’s range, signaling a possible shift in direction.
For higher-quality setups, keep the structural sweep filter enabled. This helps isolate patterns where the star candle first pushes beyond the prior candle’s extreme before rejecting, which often produces cleaner reversals and removes weaker inside-range formations.
If you want fewer but cleaner signals, keep the stricter filters on and require the pattern to form at equal highs or equal lows. If you want broader signal coverage, enable the option to signal all valid star patterns and disable the session filter to allow setups across all trading hours.
The optional stop loss display can be used as a simple invalidation reference. When enabled, it plots the stop level at the high of a sell signal bar or the low of a buy signal bar, making it easier to frame risk directly from the setup.
This indicator works best as a confirmation tool, not as a standalone reason to enter a trade. It is most useful when combined with key levels, market structure, session context, liquidity sweeps, or your existing framework. Indicator
Indicator
NQ 8020 Zones [MMT]The NQ 8020 Zones is a precision price-level indicator designed for Nasdaq futures traders. It automatically maps recurring 80/20 reaction zones around key 100-point price intervals, helping traders maintain focus on the most relevant areas of the market without unnecessary chart clutter.
This indicator defines the broader and more actionable zone from 25,020 down to 24,980. This structure reflects the intended 20-to-lower-80 price block and provides a cleaner framework for identifying reaction areas, liquidity interaction, and short-term support or resistance.
The script continuously centers its displayed zones around current market price, ensuring that only the most relevant nearby levels remain visible. For example, when price is trading around 25,000, the indicator will display a user-defined total number of zones surrounding current price, keeping the chart organized and execution-focused.
Core features
Automatically plots 80/20 zones around active 100-point price levels.
Allows the user to define the total number of zones displayed on screen.
Includes customization for zone fill, border color, and border style.
Displays a warning when applied to symbols outside supported Nasdaq futures markets.
Supports Nasdaq futures symbols such as NQ1!, MNQ1!, and standard contract symbols such as NQM2026.
Intended use
This indicator is built for traders who use price-based frameworks to identify recurring intraday reaction zones in Nasdaq futures. It can be used as a standalone reference tool or as a confluence layer alongside models based on liquidity, displacement, structure, or session execution.
Because the indicator stays centered on current price, it is especially useful for active traders who only need nearby zones visible during live market conditions. The result is a cleaner chart and a more practical view of price levels that matter most in the moment.
Inputs
Total Zones on Screen : Sets the total number of zones displayed relative to current price.
Zone Background : Adjusts the fill color of the zone.
Border Color : Adjusts the outline color.
Border Style : Selects the border appearance, including solid, dashed, dotted, or hidden.
Notes
This indicator is specifically intended for Nasdaq futures and Micro Nasdaq futures. When applied to other symbols, a warning is shown to indicate that the logic is designed for Nasdaq futures price behavior and may not be appropriate for unrelated markets. Indicator
EMA Inversion [MMT]The EMA Inversion indicator is a complete, trend-following price action system that bridges traditional moving average momentum with modern imbalance concepts (Fair Value Gaps and Inversions). It is designed to strictly identify high-probability pullback continuation setups while keeping your chart clean and optimized.
How the Strategy Works
This script looks for a specific sequence of events to trigger a valid entry:
Trend Alignment: The overarching trend is defined by the alignment of the Fast (33), Medium (50), and Slow (200) EMAs.
The Pullback: Price must pull back into the "Value Band" (the shaded area between the 33 and 50 EMAs).
The Imbalance: During this pullback, the script tracks the formation of Fair Value Gaps (FVGs).
The Inversion (Trigger): A signal is fired when price violently reverses out of the pullback, closing completely through the opposing FVG (turning it into an iFVG) while simultaneously closing back in the direction of the EMA trend.
Signal Triggers
🟢 Long Setup: Price is above all 3 EMAs. Price pulls back into the EMA band. A Bearish FVG is formed. Price then rallies, closing above the Bearish FVG (creating a bullish iFVG) AND closing back above the 33 EMA.
🔴 Short Setup: Price is below all 3 EMAs. Price pulls back into the EMA band. A Bullish FVG is formed. Price drops, closing below the Bullish FVG (creating a bearish iFVG) AND closing back below the 33 EMA.
Key Features
[* ]Decoupled FVG & iFVG Tracking : Unlike standard scripts that clutter your screen, this indicator utilizes independent, modular array management. You can set a strict limit on how many "Normal FVGs" and "Inverted FVGs" are drawn on your chart at one time, keeping your workspace incredibly clean.
Dynamic Extension Limits : Choose exactly how many bars you want your unmitigated imbalance boxes to extend to the right, or set it to 0 for indefinite extension until mitigated.
Visual Customization : Fully customize the colors, borders, and backgrounds for your EMAs, normal FVGs, and Inversion FVGs. The indicator visually flips the box colors the exact moment an inversion occurs.
Built-in Automation Alerts : The script includes pre-formatted JSON webhook alerts (ready for Node.js, Python, or 3rd-party execution services) to instantly route buy and sell signals to your live brokerage accounts.
Best Timeframes:
Works well across all intraday timeframes (1m, 3m, 5m, 15m), particularly for index futures (NQ/ES) and forex day trading.
Disclaimer: This script is for educational and technical analysis purposes only and does not constitute financial advice. Indicator
Indicator
pD Zones [MMT]pD Zones plots a clean set of intraday high‑of‑day (HOD) and low‑of‑day (LOD) zones that automatically extend forward, flip color on mitigation, and archive as historical levels for context. It is designed to give intraday traders a simple visual map of premium/discount zones derived from a chosen calculation timeframe.
Overview
Objective : Highlight the current day’s HOD/LOD wick zones as actionable intraday support and resistance.
Core logic runs on a user‑selectable source timeframe (default 15m), then projects those zones onto any chart you are trading.
Zones extend into the future, react to price via mitigation logic, and then optionally roll into a dimmed historical layer.
Zone logic
Each session, the script tracks the extreme high and low plus their wick limits (open/close‑based) on the source timeframe to form two intraday zones.
When a new day starts, the finalized prior‑day zones are “locked in” and the current day begins tracking a fresh HOD/LOD pair.
Only one HOD and one LOD zone are created per day, reducing clutter and keeping focus on the most relevant levels.
Mitigation & color flips
Active HOD zones behave as resistance: a decisive break above the top of the box flips it to a bullish (supportive) color profile, while a move back below can re‑flip it.
Active LOD zones behave as support: a break below the bottom of the box flips it to a bearish profile, and a sustained reclaim can re‑flip it as well.
Once mitigated and carried into a new day, zones are restyled with a softer historical color so they remain visible but unobtrusive.
Alerts
When price breaks a HOD zone to the upside, the script can trigger an alert message noting that HOD resistance has been broken and showing the exact level.
When price breaks a LOD zone to the downside, an alert notes that LOD support has been broken, again with the precise price printed.
These alerts are meant for intraday confirmation of structure shifts at key daily extremes, rather than frequent scalper signals.
Inputs & customization
- Calculation Timeframe: choose which timeframe defines the daily HOD/LOD zones (e.g., 5m, 15m, 1h), independent from the chart.
- Visual Settings: customize support/resistance fill colors and border color to integrate with existing layouts.
- Logic Settings:
Max Active Zones: cap how many live zones remain on the chart at once to control noise.
Max Historical Zones: keep only the most recent historical levels or show all past days.
Zone Extension Offset (Bars): control how aggressively boxes project into the future.
- Mitigation Settings: choose the historical zone color to distinguish active levels from archived ones at a glance. Indicator
Trend Meter [MMT]The Trend Meter is a dynamic Pine Script indicator designed to provide traders with a clear, multi-dimensional view of market trends and momentum across different timeframes and metrics. By integrating Exponential Moving Averages (EMAs), Volume-Weighted Average Price (VWAP), higher timeframe (HTF) analysis, and Regular Trading Hours (RTH) breakouts, this indicator offers a comprehensive tool for identifying bullish, bearish, or neutral market conditions. Its customizable visual display and label system make it ideal for traders seeking actionable insights for trend-following, breakout, or reversal strategies.
Key Features:
1. Multi-Metric Trend Analysis:
- Trend Meter : Compares a Fast EMA (default: 9) and Slow EMA (default: 21) to determine short-term trend direction.
- Bias Meter : Uses a longer-term Bias EMA (default: 35) to assess the overall market bias based on the close price.
- VWAP Meter : Evaluates price position relative to the VWAP for dynamic support/resistance insights.
- HTF Meter : Analyzes higher timeframe (default: 60-minute) price action, detecting breakouts of previous highs/lows and candle direction.
- RTH Meter : Tracks price breakouts above/below the US Regular Trading Hours (09:30–16:00 EST) 15m opening range (09:30–09:45 EST).
2. Color-Coded Visuals:
- Each metric is displayed as a horizontal line with customizable colors (green for bullish, red for bearish, gray for neutral).
- Visual style options (dotted, dashed, or solid lines) allow for personalized chart clarity.
3. Dynamic Labels:
- Optional labels for each metric (Trend, Bias, VWAP, HTF, RTH) with customizable text, size (tiny to huge), and color.
- Labels update in real-time, providing clear identification of each meter’s role and current state.
4. Flexible Metric Selection:
- Toggle individual metrics (EMA, VWAP, HTF, RTH) on/off to focus on relevant indicators for your trading style.
- Option to use the previous bar’s close price for calculations, reducing noise in volatile markets.
5. RTH and Opening Range Analysis:
- Calculates the high/low of the opening range (09:30–09:45 EST) during RTH sessions.
- Signals bullish or bearish conditions when the price breaks above/below the opening range outside the initial 15-minute window.
6. Higher Timeframe Breakout Detection:
- Monitors HTF price action to identify breakouts of the previous candle’s high or low, combined with the HTF candle’s direction for trend confirmation.
How to Use:
- Trend Confirmation : Use the Trend and Bias Meters to confirm short-term and long-term market direction.
- Breakout Trading : Leverage the RTH Meter for breakout setups above/below the opening range during US trading hours.
- Support/Resistance : Utilize the VWAP Meter to identify dynamic price levels for entries or exits.
- Higher Timeframe Context : Monitor the HTF Meter for broader market trend alignment, ideal for swing or position trading.
- Customization : Adjust EMA lengths, toggle metrics, and customize visual styles and labels to suit your chart preferences.
Settings:
- Bias Settings :
- Fast EMA (default: 9), Slow EMA (default: 21), Bias EMA (default: 35).
- Higher Timeframe (default: 60-minute).
- Option to use previous close price for calculations.
- Enable/disable individual metrics (EMA, VWAP, HTF, RTH).
- Visual Settings :
- Bullish (green), bearish (red), and neutral (gray) colors.
- Line style (dotted, dashed, solid).
- Label Settings :
- Enable/disable labels.
- Customize label size (tiny, small, normal, large, huge) and text color.
- Custom text for each meter’s label (Trend, Bias, VWAP, HTF, RTH).
Notes:
- Optimized for intraday trading (e.g., 1m, 5m, 15m) but adaptable to any timeframe.
- RTH and opening range calculations are tailored for US markets (EST timezone); adjust session times in the code for other markets.
- Higher timeframe analysis enhances context for multi-timeframe strategies.
Ideal For:
- Intraday traders targeting RTH breakout opportunities.
- Swing traders aligning with higher timeframe trends.
- Traders using VWAP and EMA-based strategies for trend and momentum analysis.
- Those seeking a clean, customizable dashboard for multi-metric market analysis. Indicator
Trend Engine [MMT]The Trend Engine is a versatile Pine Script indicator designed to identify trend direction, potential reversals, and key price levels using a combination of Exponential Moving Averages (EMAs), and Anchored Volume-Weighted Average Price (VWAP). This indicator provides traders with a clear visual representation of market bias, momentum, and key support/resistance levels, making it suitable for both trend-following and pullback trading strategies.
Key Features:
1. EMA Cloud System:
- Displays three customizable EMAs (Fast, Pullback, and Slow) with configurable lengths and visibility.
- Creates two cloud fills:
- Fast Cloud : Between the Fast EMA (default: 8) and Pullback EMA (default: 13).
- Slow Cloud : Between the Pullback EMA and Slow EMA (default: 21).
- Clouds are color-coded (green for bullish, red for bearish) based on EMA alignment, with adjustable transparency for clarity.
2. Bias EMA:
- A longer-term EMA (default: 35) indicates the overall market bias.
- Changes color based on whether the regular candle close is above (green) or below (red) the Bias EMA, providing a clear trend direction signal.
3. Heikin Ashi Signals:
- Utilizes Heikin Ashi candles to detect strong bullish or bearish momentum.
- Generates buy/sell signals when a Heikin Ashi candle confirms a trend (bullish HA candle closing above Bias EMA for buy, bearish HA candle closing below for sell).
- Signal arrows are currently disabled but can be enabled via settings for visual confirmation.
4. Anchored VWAP and Standard VWAP:
- Plots both a standard VWAP and an Anchored VWAP (anchored to the US RTH session, 09:30–16:00 EST).
- Customizable line styles (solid, cross, or circles) and colors for both VWAPs, aiding in identifying dynamic support/resistance levels.
5. Background and Candle Coloring:
- Optional background coloring reflects the market bias (green for bullish, red for bearish) based on the regular close relative to the Bias EMA.
- Optional Heikin Ashi candle coloring to visually distinguish bullish and bearish market conditions.
6. Regular Candle Close:
- Option to plot the regular (non-Heikin Ashi) close price with customizable styles (line, circles, or cross) for reference.
7. Alerts:
- Built-in alert conditions for bullish and bearish signals, allowing traders to receive notifications when a Heikin Ashi candle confirms a trend relative to the Bias EMA.
How to Use:
- Trend Identification : Use the Bias EMA and background color to determine the overall market direction.
- Pullback Trading : Monitor the EMA clouds for alignment (bullish or bearish) and use the Pullback EMA for entries during retracements.
- Support/Resistance : Leverage the VWAP and Anchored VWAP as dynamic levels for trade entries or exits.
- Signal Confirmation : Enable signal arrows (when fixed) to spot high-probability trend continuation or reversal setups.
- Customization : Adjust EMA lengths, colors, transparency, and visibility to suit your trading style and timeframe.
Settings:
- EMA Cloud : Customize lengths (default: 8, 13, 21), visibility, and cloud colors/transparency.
- Bias EMA : Adjust length (default: 35) and colors for above/below states.
- VWAP : Toggle standard and Anchored VWAP, with customizable styles and colors.
- Background/Candles : Enable/disable background and candle coloring for visual clarity.
- Regular Close : Show/hide the regular close price with style options.
Notes:
- Designed for use on any timeframe, but most effective on intraday (e.g., 5m, 15m) or daily charts.
- Best used in conjunction with other technical analysis tools for confirmation.
- Anchored VWAP is tailored for US markets (RTH session) but can be adjusted for other sessions by modifying the anchor time in the code.
Ideal For:
- Day traders and swing traders looking for trend direction and pullback opportunities.
- Traders using VWAP-based strategies for intraday support/resistance.
- Those seeking a clean, customizable visual aid for market bias and momentum.
This indicator is a powerful tool for traders aiming to capture trends and manage risk effectively, with extensive customization to adapt to various markets and trading styles. Indicator
