HERMES Zarb SetupPivot Points and FVG and IFVG .....Using volume profile to point out Value area high and low , point of control and previous day point of control and other pivot points
Indicator
Fvg_strategy
FVG Sniper [JOAT]═══ FVG SNIPER ═══
A complete Fair Value Gap engine that finds price imbalances, grades their quality, tracks how they fill, mitigate and invert, and then paints a full trade blueprint the moment a clean setup fires. One gap is spotlighted as the strongest, and every signal arrives with entry, three targets, a stop, and colored risk/reward zones — no arrows, no clutter.
▎ WHAT IT DOES
FVG Sniper detects three-candle fair value gaps (imbalances), scores each one from 0–10, and monitors its life cycle: how much of the gap has been filled, whether it has been mitigated (wick-tapped through), and whether price has closed fully through it to flip its role into an Inverted FVG (IFVG) . When a graded gap produces a rejection or an IFVG flip that agrees with the higher-timeframe bias, it draws a structured trade plan and reports the whole picture in a dashboard.
▎ HOW IT WORKS
• Gap detection — a bullish gap forms when the current low sits above the high from two bars back; a bearish gap forms when the current high sits below the low from two bars back.
• Quality filters — each candidate must clear a minimum gap size (as a multiple of ATR ) and a minimum displacement body ratio on the impulse candle, so tiny or weak imbalances are ignored.
• Grade (0–10) — blends gap size, the displacement range of the middle candle, and relative volume into a single score. Only gaps at or above your minimum grade may fire a signal.
• Fill & mitigation — the engine tracks the running extreme inside each gap to compute a live fill percentage, and marks a gap mitigated once a wick fully traverses it.
• Inversion (IFVG) — when price closes fully through a gap, its role flips; the box restyles to a dashed amber accent and the flip is logged.
• Signals — two sources you can mix or isolate: Rejection (price retraces into a live gap and reacts back out with a directional close) and IFVG Flip (a mitigated gap is closed through, confirming continuation).
• HTF bias filter — an optional higher-timeframe EMA bias must agree with the signal direction before it is allowed.
• Trade model — on a fresh signal it sets entry at close, a stop either gap-protected (just beyond the triggering gap boundary) or ATR-based, with risk clamped between a floor and a cap. Targets TP1/TP2/TP3 are placed at your chosen R multiples.
• Non-repainting — all detection, scoring and signals evaluate on confirmed (closed) bars only, and the HTF request uses no lookahead.
▎ HOW TO USE IT
• Trade in the direction of the BUY / SELL pill. The stars and score on the pill show the grade of the gap that triggered it.
• The entry line (chrome), dashed stop , and TP1/TP2/TP3 lines map the plan directly on the chart; level labels on the right print exact prices and R values.
• The green zone is the target/reward area from entry to TP3; the red zone is the risk area between entry and stop — a fast visual read of the trade's R:R.
• A single ★ spotlight tags only the strongest active gap, so you always know the best imbalance in view.
• Use live gaps as decision zones: watch the fill % of the nearest gap, and treat an IFVG flip as a shift in short-term control.
• When a trade closes, a result label prints the outcome (TP hit, stop, or exit at R) so completed setups stay readable.
• Combine with your own structure, session and news context — the gap engine locates the where , you confirm the when .
▎ KEY SETTINGS
• Engine — enable bullish/bearish detection, choose the signal source (Rejection, IFVG Flip, or both), and cap how many gaps stay visible plus their lifetime and box extension.
• Filters — ATR length, minimum gap size, minimum displacement body ratio, minimum grade, the HTF bias filter (timeframe + EMA length), and whether a directional rejection close is required.
• Trade Model — stop basis (Gap-Protected vs ATR), stop buffer/distance, risk floor and cap, TP1–TP3 in R, max trade duration, zone projection, and how many completed trades to keep.
• Visuals — toggle gap boxes, midline, hide-mitigated declutter, grade spotlight, IFVG styling, signal pills, zone boxes, lines, level and result labels, zone-reader candle coloring, optional VWAP + σ bands, and all colors/transparency/sizes.
• Dashboard — show/hide, position, text size, and dark or light panel.
▎ DASHBOARD
The on-chart panel reports: HTF bias, count of active bullish and bearish gaps, the nearest gap price and its fill %, the strongest gap's star grade, the last IFVG flip (with bar age), the active signal, any live trade with its entry, and running totals of bullish / bearish / inverted gaps detected.
▎ ALERTS
• BUY signal
• SELL signal
• Bullish IFVG Flip (inversion up)
• Bearish IFVG Flip (inversion down)
▎ NOTES
• Works on all timeframes and all assets — indices, forex, crypto, stocks, futures.
• Signals and drawings are computed on closed bars, so they do not repaint after the bar confirms.
• Object caps and hide-mitigated / declutter toggles keep the chart clean even on long histories.
• Any on-chart result labels reflect historical signals only and are illustrative, not a performance guarantee.
For research and education only. This is not financial advice. No indicator can predict the future, and past behavior does not guarantee future results — always manage your own risk.
Made with passion by JackOfAllTrades ⚡
Indicator
ICT Setup DetectorICT SETUP DETECTOR (ICT-SD)
A mechanical, bias-gated ICT setup scanner for NQ and ES futures intraday
(built and tuned on the 1-minute chart). It marks liquidity, draws the key
daily/session levels, grades directional bias across three timeframes, and
arms four ICT trade setups with fixed targets, stops, and alerts.
This is an INDICATOR, not a strategy — it places no orders. It draws on the
chart and fires alert() messages so you can act (or forward them to a bot).
------------------------------------------------------------
WHAT IT DRAWS
------------------------------------------------------------
LEVELS
- PDH / PDL — previous day high & low
- Overnight H / L — 18:00 to 09:30 ET range
- Midnight Open (00:00 ET) and RTH Open (09:30 ET)
- ORG — Opening Range Gap zone (prior RTH close to today's RTH open)
- Prior Week H / L
BIAS ENGINE (top-right table)
- Reads three timeframes (default 4H / 1H / 15m) plus the ORG gap state
- Modes: Structure (pivot HH/HL), Momentum (EMA 20 vs 50 + close), or Hybrid
- Produces a gate: "Longs OK", "Shorts OK", or "NO TRADE"
- When the gate is on, setups only arm in the permitted direction
KILLZONES (shaded)
- London 03:00-04:00, NY AM 10:00-11:00, NY PM 14:00-15:00 (NY time, DST-aware)
LIQUIDITY SWEEPS
- BSL/SSL grabs of PDH/PDL/ON H/L (breach within N bars + close back through)
- Red "BSL" / green "SSL" triangles
TRADE SETUPS (each has arm -> entry -> exit with TP / SL / time-stop)
- Silver Bullet — sweep, then FVG + displacement inside a killzone
- OTE — 62-79% fib retrace of a swept leg
- OB+FVG — order-block 50% mitigation behind a displacement FVG
- Sweep Reversal (SR) — simple sweep-and-fade scalp (yellow SR-L / SR-S)
15-MINUTE FVG IDENTIFIER
- 3-bar Fair Value Gaps from the 15m timeframe, drawn on your chart
- Non-repainting (only confirmed/closed 15m candles create a box)
- Teal = bullish gap, red = bearish gap, with a dashed CE (mid) line
- Boxes extend right until price fully fills the gap, then freeze/grey
------------------------------------------------------------
HOW TO USE
------------------------------------------------------------
1. Add to an NQ or ES chart on the 1-minute timeframe (point sizing is
auto-detected from the ticker; other symbols fall back to NQ values).
2. Check the bias table (top-right) for the current gate state before acting.
3. Wait for a setup flag/label to arm in the gate-allowed direction. Each
setup shows its FVG/zone box, dashed entry (CE), dotted stop, dotted TP.
4. Targets default to +20 pts (NQ) / +15 pts (ES). Setups auto-skip when the
required stop is wider than the configured max.
5. To get notified: create an alert on this indicator and choose the
"Any alert() function call" condition. Enable the alert types you want
in the Alerts group (armed / entry / exit / bias-flip / new 15m FVG).
------------------------------------------------------------
KEY SETTINGS
------------------------------------------------------------
- Bias gate on/off, and Bias mode (Structure / Momentum / Hybrid)
- Enable/disable each setup individually
- Displacement filter: x ATR(20) and optional volume-spike requirement
- Sweep breach window (how many bars a wick may lead the close-back)
- Targets and "skip if stop >" caps (per NQ / ES)
- Killzone session times, colors, and visualization toggles
- 15m FVG: timeframe, min gap size, CE line, extend-until-mitigated,
remove-vs-grey on fill, max active gaps, and per-direction colors
TUNING
- Too few signals: set Bias mode to Momentum, turn the bias gate off, or
lower the displacement volume multiplier toward 1.0
- Too many signals: raise Displacement x ATR to ~2.0, raise the volume
multiplier to 1.5-2.0, or raise the minimum FVG size
------------------------------------------------------------
NOTES
------------------------------------------------------------
- Designed for NQ/ES on the 1m chart; other symbols/timeframes are untested.
- Live intrabar markers (especially Sweep Reversal) can update until the bar
closes; all alerts fire on bar close, so alerts are stable.
- Educational tool. Not financial advice. Test before trading live.
```
Want me to:
- **Trim it to a short version** (a few lines) for the tooltip/one-liner, or
- **Save it to a file** in the repo (e.g. `pine/ICT-SD-description.txt`) alongside the source?
Indicator
FVG Retest Entry Engine [trade_w_samet]🎯 FVG Retest Entry Engine
FVG Retest Entry Engine is a structured Fair Value Gap retest analysis indicator designed to help traders study confirmed gap reactions, structure alignment, filtered entry conditions, and multi-target visual trade models directly on the price chart.
This script focuses on one main concept:
FVG retest-based entry visualization.
It is not designed to be a simple buy/sell signal generator.
It is not designed to show every possible Fair Value Gap.
It is not designed to create constant chart noise.
Instead, the goal of FVG Retest Entry Engine is to detect confirmed structure events, identify eligible Fair Value Gaps, monitor their retests, apply configurable quality checkpoints, and visualize accepted setups using one entry level, one protective stop, and three take-profit levels.
The indicator includes:
• Bullish and bearish market-structure detection
• BOS and CHoCH classification
• Three-candle Fair Value Gap detection
• Internal FVG memory and invalidation handling
• Structure-linked FVG candidate selection
• FVG quality scoring and setup grading
• Armed-zone retest monitoring
• Multiple retest confirmation models
• Volume, Directional Force, and confirmed HTF bias filters
• FVG Retest Passport
• Blocker Lens state reporting
• Confirmed-close signal commitment
• Optional Live Preview dashboard state
• Gap-protected and ATR-based stop-loss models
• TP1, TP2, and TP3 risk-multiple projections
• Optional breakeven movement after TP1
• Active and historical TP / SL areas
• Executed FVG retest zones
• One-active-trade-at-a-time logic
• Mobile chart layout
• Multiple visual themes
• Advanced entry and lifecycle alerts
• JSON webhook support
• Compact bottom-right dashboard
The purpose of this script is to help users visually study where a structure event and an eligible Fair Value Gap combine with a confirmed retest condition.
It should be treated as a chart-analysis and educational decision-support tool.
It is not financial advice.
It is not an automated trading system.
It does not guarantee profitable trades.
It does not execute broker orders.
It does not replace personal analysis, risk management, or trade validation.
━━━━━━━━━━━━━━━━━━━━━━
📌 OVERVIEW
━━━━━━━━━━━━━━━━━━━━━━
At a high level, FVG Retest Entry Engine does the following:
• Detects confirmed bullish and bearish structure breaks.
• Classifies structure events as BOS or CHoCH.
• Detects bullish and bearish three-candle Fair Value Gaps.
• Stores valid FVG zones in internal memory.
• Tracks zone direction, boundaries, age, displacement, volume context, and prior interactions.
• Searches for an eligible FVG after a matching structure event.
• Scores and ranks available FVG candidates.
• Arms the best available zone for retest monitoring.
• Waits for the selected minimum retest delay.
• Detects the selected FVG retest pattern.
• Evaluates reaction quality and optional confluence filters.
• Assigns a setup grade such as A+, A, B, or FILTERED.
• Confirms final entry conditions only when the chart candle closes.
• Draws one Entry, one SL, and three TP levels.
• Tracks TP1, TP2, TP3, stop-loss, and breakeven events.
• Allows only one active trade projection at a time.
• Keeps completed trade areas when historical display is enabled.
• Marks completed models as bullish or bearish FVG Retest outcomes.
• Displays the current bias, engine state, and active levels in the dashboard.
• Provides entry, armed-zone, target, stop, breakeven, and webhook alert options.
The script is intentionally built as a structured process.
It does not include machine-learning prediction.
It does not include guaranteed performance claims.
It does not attempt to forecast every future market movement.
It provides a transparent way to study structure-linked FVG retests and their projected trade lifecycle.
━━━━━━━━━━━━━━━━━━━━━━
🧠 CORE IDEA
━━━━━━━━━━━━━━━━━━━━━━
The core idea behind FVG Retest Entry Engine is based on the relationship between market structure and Fair Value Gap reactions.
A Fair Value Gap represents a three-candle price imbalance.
A bullish FVG is formed when the current candle’s low is above the high from two candles earlier.
A bearish FVG is formed when the current candle’s high is below the low from two candles earlier.
The script does not treat every FVG as an entry.
Instead, it waits for a confirmed structure event and then searches for an eligible FVG that matches that directional context.
The selected FVG becomes an armed zone.
Price must later return to that zone and satisfy the chosen retest condition.
The engine can then evaluate:
• gap size relative to ATR
• formation displacement
• formation volume context
• FVG age
• prior zone interactions
• structure-break quality
• retest depth
• reaction-candle quality
• volume participation
• DI / ADX directional force
• confirmed higher-timeframe bias
• minimum setup grade
The goal is not to show more signals.
The goal is to create a documented and understandable process from structure event to confirmed FVG retest model.
━━━━━━━━━━━━━━━━━━━━━━
🧩 WHY THIS SCRIPT IS NOT A SIMPLE BUY/SELL INDICATOR
━━━━━━━━━━━━━━━━━━━━━━
FVG Retest Entry Engine is not intended to be used as a blind buy/sell system.
The script is structured as a visual review workflow:
Structure event is confirmed
→ matching FVG candidates are reviewed
→ one eligible FVG is selected
→ the FVG becomes armed
→ price returns to the armed zone
→ the retest pattern is checked
→ reaction quality is evaluated
→ enabled filters are checked
→ the setup receives a grade
→ the candle must close with all conditions still valid
→ Entry, SL, TP1, TP2, and TP3 are projected
→ the active model is monitored
→ the model closes at TP3, stop loss, targets complete, or breakeven
→ the completed FVG Retest model is archived visually
Each part has a specific purpose.
The structure system identifies a directional event.
The FVG memory system stores imbalance zones.
The candidate-ranking system selects a relevant gap instead of using every gap.
The armed-zone system separates observation from entry.
The retest logic defines what qualifies as a valid return.
The quality checkpoints reduce setups that fail enabled conditions.
The grading system summarizes internal setup quality.
The entry model provides visual planning levels.
The stop model creates a consistent risk reference.
The three-target model provides staged reward references.
The Blocker Lens explains the current engine state.
The Passport explains why an accepted setup qualified.
The alert system supports monitoring of confirmed events.
This makes the script a structured FVG retest analysis tool, not a guaranteed trade signal generator.
━━━━━━━━━━━━━━━━━━━━━━
⚙️ HOW THE SCRIPT WORKS
━━━━━━━━━━━━━━━━━━━━━━
The script operates through several connected stages.
First, it identifies confirmed swing highs and swing lows.
Price breaking a confirmed swing level can create a bullish or bearish structure event.
The break may be classified as BOS when it continues the current structure bias or CHoCH when it changes that bias.
The engine separately detects three-candle Fair Value Gaps and stores their contextual information.
bool tws_bullish_fvg = bar_index >= 2 and low > high
bool tws_bearish_fvg = bar_index >= 2 and high < low
float tws_bullish_fvg_top = low
float tws_bullish_fvg_bottom = high
float tws_bearish_fvg_top = low
float tws_bearish_fvg_bottom = high
float tws_bullish_fvg_size = tws_bullish_fvg_top - tws_bullish_fvg_bottom
float tws_bearish_fvg_size = tws_bearish_fvg_top - tws_bearish_fvg_bottom
When a structure event occurs, the engine reviews matching FVG candidates within the selected distance and timing limits.
The available candidates are compared using the active profile’s rules.
The selected zone becomes armed and remains under observation until:
• a confirmed retest creates an entry
• the setup expires
• the FVG is invalidated
• another structure search replaces it
Once price interacts with the armed zone, the selected retest model and reaction-quality conditions are checked.
Volume, DI / ADX, and higher-timeframe bias can also be required.
Only a setup that passes the active rules and remains valid at candle close can create a permanent entry model.
━━━━━━━━━━━━━━━━━━━━━━
🔵 BULLISH FVG RETEST LOGIC
━━━━━━━━━━━━━━━━━━━━━━
A bullish FVG Retest setup begins with bullish structure context.
The script requires a confirmed bullish BOS or CHoCH event and then searches for a directionally matching FVG candidate.
The selected zone must remain valid while the engine waits for price to return.
Depending on the chosen profile and retest model, bullish confirmation may require:
• wick contact with the zone
• real-body contact
• a close inside the zone
• a bullish reaction reclaim
• directional recovery above the zone midpoint
• a close above the relevant FVG edge
• a bullish rejection wick
The engine may then check:
• reaction strength
• volume participation
• positive DI dominance
• minimum ADX strength
• confirmed bullish HTF alignment
• minimum accepted grade
When every enabled condition remains valid at candle close, the script creates:
• a bullish FVG RETEST label
• an executed FVG retest box
• an entry reference at the confirmation close
• a protective stop below the setup reference
• TP1, TP2, and TP3 above entry
• blue reward visualization
• red risk visualization
This does not mean price must continue upward.
It means the script detected a bullish FVG retest condition that satisfied the selected rules at the time of confirmation.
━━━━━━━━━━━━━━━━━━━━━━
🔴 BEARISH FVG RETEST LOGIC
━━━━━━━━━━━━━━━━━━━━━━
A bearish FVG Retest setup begins with bearish structure context.
The script requires a confirmed bearish BOS or CHoCH event and then searches for a directionally matching FVG candidate.
The selected zone must remain valid while the engine waits for price to return.
Depending on the chosen profile and retest model, bearish confirmation may require:
• wick contact with the zone
• real-body contact
• a close inside the zone
• a bearish reaction reclaim
• directional recovery below the zone midpoint
• a close below the relevant FVG edge
• a bearish rejection wick
The engine may then check:
• reaction strength
• volume participation
• negative DI dominance
• minimum ADX strength
• confirmed bearish HTF alignment
• minimum accepted grade
When every enabled condition remains valid at candle close, the script creates:
• a bearish FVG RETEST label
• an executed FVG retest box
• an entry reference at the confirmation close
• a protective stop above the setup reference
• TP1, TP2, and TP3 below entry
• blue reward visualization
• red risk visualization
This does not mean price must continue downward.
It means the script detected a bearish FVG retest condition that satisfied the selected rules at the time of confirmation.
━━━━━━━━━━━━━━━━━━━━━━
💎 FVG QUALITY FILTER SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
The script includes a multi-layer FVG quality system to reduce unnecessary chart signals.
This is important because not every gap has the same context and not every retest should create an entry model.
The quality system may evaluate:
• minimum gap size relative to ATR
• displacement of the formation candle
• gap location inside the recent dealing range
• formation-volume context
• gap age
• previous interactions with the zone
• distance from the matching structure event
• structure-break strength
• reaction-candle strength
• volume participation on retest
• DI / ADX directional force
• confirmed HTF bias
• final setup grade
The exact behavior depends on the selected Engine Style.
Original Sync uses the first validated calibration and star-based acceptance logic.
Balanced Flow uses moderate filtering.
Precision Flow applies stricter FVG and retest requirements.
Fast Flow accepts more active conditions.
Position Flow uses wider structural and timing windows.
Custom Lab exposes the advanced thresholds for manual configuration.
The filter system does not guarantee better future outcomes.
It controls how selective the engine is before creating a confirmed visual model.
━━━━━━━━━━━━━━━━━━━━━━
📏 GAP / ATR FILTER
━━━━━━━━━━━━━━━━━━━━━━
The gap-width filter measures the detected FVG against ATR.
This helps the engine reject extremely small imbalance zones relative to current market volatility.
A higher minimum gap-width value makes FVG storage and candidate selection more selective.
A lower value allows smaller gaps to enter the internal memory.
The filter is volatility-adjusted because the same absolute price distance can have different meaning across symbols and timeframes.
The active threshold depends on the chosen profile or Custom Lab value.
A larger gap is not automatically a better setup.
Gap size is only one component of the complete selection and retest process.
━━━━━━━━━━━━━━━━━━━━━━
🕯️ DISPLACEMENT QUALITY FILTER
━━━━━━━━━━━━━━━━━━━━━━
The displacement filter evaluates the directional body of the candle associated with FVG formation.
The formation body is compared with ATR and converted into a bounded internal score.
This helps the script distinguish a stronger directional imbalance from a gap created during weak or narrow price action.
When the Gap Impulse Check is enabled, an FVG must satisfy the selected displacement threshold before it is stored as a valid candidate.
A higher threshold reduces the number of eligible FVGs.
A lower threshold accepts more moderate formations.
The displacement score is an internal quality measurement.
It does not predict whether the zone will hold in the future.
━━━━━━━━━━━━━━━━━━━━━━
📊 REACTION STRENGTH FILTER
━━━━━━━━━━━━━━━━━━━━━━
The reaction-strength filter evaluates the candle that interacts with the armed FVG.
The score can include:
• close location inside the candle
• directional wick quality
• body size relative to ATR
• bullish or bearish candle direction
• penetration depth inside the FVG
The purpose is to separate a basic touch from a more structured directional response.
A higher minimum reaction-strength value requires a clearer response from the zone.
A lower value accepts more retest conditions.
Original Sync can use its original reaction logic without the same adaptive score requirement.
The reaction score is not a win probability.
It is a standardized way to evaluate whether the retest candle matches the selected profile’s quality requirements.
━━━━━━━━━━━━━━━━━━━━━━
🧼 CONFIRMED RETEST FILTER
━━━━━━━━━━━━━━━━━━━━━━
The confirmed-retest layer requires price to satisfy the active retest model and remain valid at candle close.
Available Original Sync reaction patterns include:
• Any Wick Contact
• Real Body Contact
• Close Within Gap
• Reaction Reclaim
Available adaptive reaction models include:
• First Contact
• Directional Recovery
• Edge Reclaim
• Rejection Wick
First Contact accepts basic interaction with the zone.
Directional Recovery requires directional behavior after the interaction.
Edge Reclaim requires price to close through the relevant boundary.
Rejection Wick applies a stricter wick-and-close response.
The script can also use an interaction margin to tolerate minor boundary differences.
A minimum delay prevents the engine from confirming a retest too soon after the structure event.
An expiry window prevents stale armed zones from producing entries too far from their original context.
Final entry commitment remains bar-close based.
━━━━━━━━━━━━━━━━━━━━━━
🎯 ENTRY MODEL
━━━━━━━━━━━━━━━━━━━━━━
When an armed FVG retest passes all enabled conditions, the script creates a visual entry model.
The entry reference is the close of the candle that confirms the retest.
Permanent entries, labels, boxes, and entry alerts are committed only after candle close.
tws_preview_ready := tws_eval_zone_touched and tws_eval_reaction_pass and tws_direction_filters_pass and tws_eval_grade_pass
bool tws_confirmed_entry = tws_preview_ready and barstate.isconfirmed
if tws_confirmed_entry
tws_long_signal := tws_armed_direction == 1
tws_short_signal := tws_armed_direction == -1
tws_entry_event := true
tws_trade_active := true
tws_trade_direction := tws_armed_direction
tws_trade_open_bar := bar_index
tws_trade_entry := close
Confirmed Close mode waits for the candle to finish before the dashboard treats the setup as an entry.
Live Preview can show that current conditions are ready while the realtime candle is still open.
The preview may change intrabar because the candle is unfinished.
It does not create a permanent historical entry model unless the setup remains valid when the candle closes.
The entry is a visual analysis reference.
It is not a broker order and does not require the user to enter a trade.
━━━━━━━━━━━━━━━━━━━━━━
🛑 ATR STOP-LOSS MODEL
━━━━━━━━━━━━━━━━━━━━━━
The script includes two stop-placement models.
Gap-Protected Stop uses the selected FVG boundary plus an ATR-based protective buffer.
For bullish setups, the stop is projected below the FVG.
For bearish setups, the stop is projected above the FVG.
Volatility Stop projects the stop at an ATR multiple from entry.
A minimum stop-distance percentage can prevent extremely narrow visual stops.
float tws_raw_stop =
tws_stop_mode == "Gap-Protected Stop" ?
(
tws_trade_direction == 1 ?
tws_armed_bottom - tws_atr * tws_fvg_stop_buffer_atr :
tws_armed_top + tws_atr * tws_fvg_stop_buffer_atr
) :
(
tws_trade_direction == 1 ?
tws_trade_entry - tws_atr * tws_atr_stop_multiplier :
tws_trade_entry + tws_atr * tws_atr_stop_multiplier
)
float tws_raw_stop_distance = math.abs(tws_trade_entry - tws_raw_stop)
float tws_guaranteed_distance = tws_trade_entry * tws_minimum_stop_percent / 100.0
float tws_final_stop_distance = math.max(tws_raw_stop_distance, tws_guaranteed_distance)
ATR is used because volatility changes across markets and timeframes.
A wider stop changes the projected risk distance and therefore also changes all three target levels.
The displayed SL is a visual planning level only.
It does not place or manage a real broker stop order.
━━━━━━━━━━━━━━━━━━━━━━
🎯 TAKE-PROFIT RR MODEL
━━━━━━━━━━━━━━━━━━━━━━
The script uses three take-profit levels.
Each target is calculated from the distance between entry and the original stop.
float tws_trade_risk = math.abs(tws_trade_entry - tws_trade_original_stop)
tws_trade_tp1 := tws_trade_direction == 1 ? tws_trade_entry + tws_trade_risk * tws_tp1_r : tws_trade_entry - tws_trade_risk * tws_tp1_r
tws_trade_tp2 := tws_trade_direction == 1 ? tws_trade_entry + tws_trade_risk * tws_tp2_r : tws_trade_entry - tws_trade_risk * tws_tp2_r
tws_trade_tp3 := tws_trade_direction == 1 ? tws_trade_entry + tws_trade_risk * tws_tp3_r : tws_trade_entry - tws_trade_risk * tws_tp3_r
The default concept is:
TP1 = first risk-multiple target
TP2 = second risk-multiple target
TP3 = final risk-multiple target
The exact R values can be adjusted in Position Architecture.
The script also contains visual position-share percentages for TP1, TP2, and TP3.
These shares are used by the internal lifecycle model.
They do not represent a broker account, real position size, or verified financial performance.
The RR settings only control projected visual distances.
They should not be interpreted as recommendations or guaranteed objectives.
━━━━━━━━━━━━━━━━━━━━━━
📦 ACTIVE TP / SL BOX SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
When a confirmed FVG Retest entry appears, the script can draw a complete visual trade model.
The visual model includes:
• executed FVG retest zone
• entry line
• original stop line
• active stop line
• TP1 line
• TP2 line
• TP3 line
• red risk box
• blue reward box
• Entry price label
• SL price label
• TP1, TP2, and TP3 price labels
• bullish or bearish entry label
The active boxes extend to the right while the model is open.
When the model closes, the right edge is fixed at the closing candle.
If Keep Completed Trade Areas is enabled, completed boxes and lines remain visible for historical review.
The Completed Trade History Limit controls how many previous visual models are retained.
The TP area uses a blue-toned visual palette.
TP price labels use a different, darker background so they remain distinct from the reward box.
The SL area remains red for clearer risk separation.
━━━━━━━━━━━━━━━━━━━━━━
🚦 ONE ACTIVE TRADE AT A TIME
━━━━━━━━━━━━━━━━━━━━━━
The script includes one-active-trade-at-a-time logic.
If a trade model is active, the engine does not create another trade model until the current one closes.
The active model may close through:
• TP3
• targets complete
• stop loss
• breakeven exit
This design separates:
• FVG and structure detection
• trade-model creation permission
The engine can continue calculating market context while a model is active, but another entry model is not opened.
This helps prevent overlapping TP / SL areas and keeps the chart easier to interpret.
The one-active-model rule is a visual management decision.
It is not a restriction on the user’s personal trading activity.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ SAME-CANDLE TP / SL HANDLING
━━━━━━━━━━━━━━━━━━━━━━
If a target and the active stop are both touched on the same candle, standard OHLC data cannot reveal the true intrabar sequence.
The script therefore includes two selectable assumptions:
Protective First
Target First
Protective First assumes the stop is processed before target events.
Target First processes available target events before the stop check.
bool tws_conservative_mode =
tws_intrabar_priority == "Protective First"
if tws_conservative_mode and tws_stop_touched
tws_trade_remaining_percent := 0.0
tws_close_trade := true
tws_close_reason := tws_trade_active_stop == tws_trade_entry ? "BREAKEVEN" : "STOP LOSS"
tws_final_exit_price := tws_trade_active_stop
else
if not tws_tp1_reached and tws_tp1_touched
tws_tp1_reached := true
tws_tp1_event := true
Protective First is the more conservative bar-based assumption.
Target First is more optimistic.
Neither option reproduces exact tick-by-tick broker execution.
The model does not include spread, slippage, commissions, latency, or partial-fill behavior.
━━━━━━━━━━━━━━━━━━━━━━
🏷️ FVG RETEST LABELS
━━━━━━━━━━━━━━━━━━━━━━
The script uses clear directional FVG Retest labels.
Bullish entry labels use:
🟢 FVG RETEST
📈 LONG
Bearish entry labels use:
🔴 FVG RETEST
📉 SHORT
Entry labels can also display:
• grade
• setup score
• FVG age
• retest depth
• Passport information
Completed-model labels emphasize that the closed model originated from an FVG retest.
A completed bullish model can display:
🟢 BULLISH FVG RETEST
🔒 MODEL CLOSED
🎯 close reason
⭐ grade
TP1 / TP2 / TP3 status
A completed bearish model uses the corresponding bearish wording and color.
The labels do not display USD profit or account-profit claims.
All chart labels use bold and italic text formatting.
The signal-label size can be adjusted from the settings.
━━━━━━━━━━━━━━━━━━━━━━
📍 FVG ZONE DISPLAY MODES
━━━━━━━━━━━━━━━━━━━━━━
The FVG display system includes three modes:
Hidden
Selected Gap
All Active Gaps
Hidden mode removes active FVG memory boxes from the chart while allowing the engine to continue calculating them internally.
Selected Gap shows only the FVG currently armed for retest monitoring.
All Active Gaps displays every currently stored and valid FVG zone.
Show Executed FVG Retests separately controls whether the FVG zone that created an entry remains highlighted as part of the trade model.
The selected display mode affects visual presentation only.
It does not change the underlying FVG calculations.
For the cleanest chart, Selected Gap is generally the most focused mode.
All Active Gaps can be useful for research but may create more chart density.
━━━━━━━━━━━━━━━━━━━━━━
🧹 FVG INVALIDATION
━━━━━━━━━━━━━━━━━━━━━━
The script can automatically remove invalidated FVG zones.
A bullish FVG may be invalidated when confirmed price action closes through the zone in the opposite direction.
A bearish FVG may be invalidated when confirmed price action closes through its opposite boundary.
An armed zone can also be cleared when:
• its retest window expires
• the zone exceeds the permitted lifetime
• the internal memory limit removes an older gap
• the active structure search is replaced
When an armed FVG becomes invalid, the Blocker Lens can display FVG INVALIDATED.
When the retest window expires, it can display SETUP EXPIRED.
Removing invalidated or stale zones helps prevent outdated FVGs from creating later entries outside their intended context.
Users can disable automatic invalidation removal if they prefer to retain more zones visually.
━━━━━━━━━━━━━━━━━━━━━━
📟 DASHBOARD
━━━━━━━━━━━━━━━━━━━━━━
The script includes a compact dashboard positioned in the bottom-right corner.
The dashboard displays:
• BIAS
• STATE
• ENTRY
• TP1
• TP2
• TP3
• SL
BIAS uses the confirmed higher-timeframe filter when that filter is enabled and valid.
Otherwise, it reflects the current internal structure bias.
STATE is powered by the Blocker Lens.
Possible states include:
• WAITING STRUCTURE
• SCANNING FVG
• NO ELIGIBLE FVG
• FVG ARMED
• RETEST DELAY
• WAITING RETEST
• VOLUME BLOCK
• DI BLOCK
• HTF BLOCK
• WEAK REACTION
• GRADE BLOCK
• LIVE PREVIEW READY
• WAITING BAR CLOSE
• TRADE ACTIVE
• COOLDOWN
• SETUP EXPIRED
• FVG INVALIDATED
The dashboard size can be set to Micro, Compact, or Standard.
The dashboard is designed to summarize engine state and current price references.
It is not a performance report.
It is not a replacement for PulseWire Strategy Tester.
━━━━━━━━━━━━━━━━━━━━━━
🚨 ALERT SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
FVG Retest Entry Engine includes advanced alert options for:
• FVG armed
• bullish FVG Retest entry
• bearish FVG Retest entry
• any FVG Retest entry
• TP1 reached
• TP2 reached
• TP3 reached
• breakeven activated
• stop loss
• breakeven exit
Alert packages include:
Off
Qualified Entries
Premium Entries
Full Lifecycle
Webhook JSON
Qualified Entries focuses on confirmed accepted entries.
Premium Entries applies stricter grade-based alert delivery.
Full Lifecycle includes entry and management events.
Webhook JSON sends structured event messages for external processing.
Alert Direction can be limited to Both Directions, Bullish Only, or Bearish Only.
Minimum Alert Grade can be set to All Qualified, A / A+, or A+ Only.
Alert filtering affects alert delivery only.
It does not change the chart’s signal calculations.
alertcondition(tws_armed_alert_event, title="trade_w_samet • FVG ARMED", message='trade_w_samet FVG ARMED | {{ticker}} | TF: {{interval}} | Score: {{plot("SIGNAL_SCORE")}}')
alertcondition(tws_entry_alert_event and tws_trade_direction == 1, title="trade_w_samet • BULLISH FVG RETEST", message='trade_w_samet BULLISH FVG RETEST | {{ticker}} | TF: {{interval}} | Score: {{plot("SIGNAL_SCORE")}} | Entry: {{plot("ENTRY")}} | SL: {{plot("SL")}} | TP1: {{plot("TP1")}} | TP2: {{plot("TP2")}} | TP3: {{plot("TP3")}}')
alertcondition(tws_entry_alert_event and tws_trade_direction == -1, title="trade_w_samet • BEARISH FVG RETEST", message='trade_w_samet BEARISH FVG RETEST | {{ticker}} | TF: {{interval}} | Score: {{plot("SIGNAL_SCORE")}} | Entry: {{plot("ENTRY")}} | SL: {{plot("SL")}} | TP1: {{plot("TP1")}} | TP2: {{plot("TP2")}} | TP3: {{plot("TP3")}}')
alertcondition(tws_tp1_alert_event, title="trade_w_samet • TP1 REACHED", message='trade_w_samet TP1 REACHED | {{ticker}} | TP1: {{plot("TP1")}}')
alertcondition(tws_stop_alert_event, title="trade_w_samet • STOP LOSS", message='trade_w_samet STOP LOSS | {{ticker}} | SL: {{plot("SL")}}')
Alerts are monitoring tools only.
They do not execute trades or place broker orders.
━━━━━━━━━━━━━━━━━━━━━━
🔔 HOW TO USE ALERTS
━━━━━━━━━━━━━━━━━━━━━━
A practical alert workflow:
1. Add FVG Retest Entry Engine to the chart.
2. Select the desired Engine Style and confirmation settings.
3. Open PulseWire’s alert window.
4. Select the indicator as the alert condition.
5. Choose the desired entry or lifecycle condition.
6. Select the alert frequency appropriate for confirmed-candle monitoring.
7. Use the Alert Package, direction, and grade controls inside the indicator when needed.
8. Add a webhook URL only when using a compatible external workflow.
9. Test the alert configuration before depending on it.
10. Confirm every event with personal analysis and risk management.
For confirmed entry monitoring, users should avoid treating provisional realtime candle conditions as permanent signals.
Entry alerts are designed around the script’s confirmed event variables.
Alert delivery can still depend on PulseWire servers, the user’s alert configuration, data availability, and any external webhook destination.
━━━━━━━━━━━━━━━━━━━━━━
🧪 HOW TO USE THE INDICATOR
━━━━━━━━━━━━━━━━━━━━━━
A practical workflow:
1. Add FVG Retest Entry Engine to a standard candlestick chart.
2. Begin with Original Sync or Balanced Flow.
3. Keep Signal Timing on Confirmed Close for the clearest workflow.
4. Use Selected Gap to keep the chart focused.
5. Observe the dashboard STATE value.
6. Wait for a confirmed structure event and an armed FVG.
7. Review the FVG zone before the retest occurs.
8. When price returns, allow the selected retest model and filters to complete.
9. Review the FVG Retest Passport when an entry appears.
10. Use the displayed Entry, SL, TP1, TP2, and TP3 as visual references only.
11. Evaluate whether the setup fits personal structure, liquidity, session, and risk rules.
12. Use alerts for monitoring rather than blind execution.
13. Review completed FVG Retest labels to understand the model lifecycle.
14. Test settings on the exact markets and timeframes personally studied.
The indicator is best used as a structured FVG retest review tool.
It should not be used as an automatic decision-maker.
━━━━━━━━━━━━━━━━━━━━━━
⚙️ SETTINGS REFERENCE
━━━━━━━━━━━━━━━━━━━━━━
⚡ Signal Blueprint
Engine Style
Controls the active configuration profile.
Available profiles:
Original Sync
Balanced Flow
Precision Flow
Fast Flow
Position Flow
Custom Lab
Allow Bullish Setups
Enables or disables bullish FVG Retest models.
Allow Bearish Setups
Enables or disables bearish FVG Retest models.
━━━━━━━━━━━━━━━━━━━━━━
🪪 Retest Experience
FVG Retest Passport
Controls whether Passport information is Off, Compact, or Detailed.
Show Blocker Lens
Shows or hides the engine STATE explanation in the dashboard.
Signal Timing
Selects Confirmed Close or Live Preview behavior.
Live Preview affects the dashboard’s provisional realtime state. Permanent entries remain candle-close confirmed.
━━━━━━━━━━━━━━━━━━━━━━
🧬 Original Sync Engine
Original Signal Calibration
Selects Manual Sync, Bitcoin Map, Ethereum Map, Solana Map, or Gold Map.
Structure Window
Controls pivot sensitivity in Manual Sync.
Minimum Gap Footprint — ATR
Controls the minimum FVG width.
Gap Lifetime
Controls how long stored FVGs remain eligible.
Gap Memory Capacity
Controls the number of stored zones.
Break-to-Gap Distance
Controls the maximum allowed distance between structure context and FVG eligibility.
After-Break Scan Window
Controls how long the engine continues searching after a break.
Reaction Pattern
Selects Any Wick Contact, Real Body Contact, Close Within Gap, or Reaction Reclaim.
Reaction Margin %
Adds tolerance around FVG boundaries.
Minimum Reaction Delay
Controls how many bars must pass before retest confirmation.
Reaction Expiry Bars
Controls how long the armed setup may wait.
Participation Multiplier
Controls the Original Sync volume requirement.
Minimum Directional Force
Controls the Original Sync ADX threshold.
Minimum Sync Rating
Controls the minimum accepted star rating.
Minimum Risk Distance %
Prevents extremely narrow stops.
━━━━━━━━━━━━━━━━━━━━━━
🧭 Structure Pulse
Structure Sensitivity
Controls pivot detection in Custom Lab.
Display Structure Tags
Shows or hides BOS / CHoCH labels.
Close-Lock Breaks
Requires a candle close beyond structure when enabled.
Break Momentum Check
Requires directional expansion on the break candle.
Break Body Threshold — ATR
Controls the required break-candle body size.
Break Clearance — ATR
Adds an ATR-based buffer beyond the structure level.
━━━━━━━━━━━━━━━━━━━━━━
🧱 Gap Intelligence
Minimum Gap Width — ATR
Controls the minimum stored FVG size.
Gap Impulse Check
Enables displacement filtering.
Minimum Gap Impulse
Controls the required formation displacement.
Minimum Gap Score
Controls the minimum candidate-quality score.
Allowed Prior Reactions
Controls how many previous zone interactions are accepted.
Gap Expiry Bars
Controls maximum FVG age.
Active Gap Capacity
Controls stored-zone capacity.
Maximum Structure Link
Controls the maximum structure-to-FVG distance.
Break Follow-Through Window
Controls post-break candidate scanning.
Delete Invalidated Gaps
Removes zones invalidated by confirmed opposite price action.
━━━━━━━━━━━━━━━━━━━━━━
🎯 Reaction Trigger
Reaction Model
Selects First Contact, Directional Recovery, Edge Reclaim, or Rejection Wick.
Gap Interaction Margin %
Adds tolerance around FVG boundaries.
Minimum Reaction Strength
Controls the required retest-candle score.
Reaction Delay Bars
Controls the minimum delay before retest confirmation.
Setup Expiry Bars
Controls how long the armed zone remains available.
Signal Cooldown Bars
Controls the delay after a completed model before another entry is permitted.
━━━━━━━━━━━━━━━━━━━━━━
🛂 Quality Checkpoints
Volume Participation Check
Enables or disables the retest-volume filter.
Volume Baseline Length
Controls the volume moving-average period.
Required Volume Expansion
Controls the required volume multiplier.
Directional Force Check
Enables or disables DI / ADX filtering.
Directional Force Length
Controls the DI period.
Trend Strength Smoothing
Controls ADX smoothing.
Minimum Trend Strength
Controls the required ADX value.
Higher-Timeframe Bias Check
Enables or disables HTF directional alignment.
Bias Timeframe
Selects the higher timeframe.
Bias Fast EMA
Controls the fast HTF EMA length.
Bias Slow EMA
Controls the slow HTF EMA length.
Minimum Setup Grade
Selects B Grade or Better, A Grade or Better, or A+ Only.
The HTF layer uses previous completed higher-timeframe values.
float tws_htf_close = request.security(
syminfo.tickerid,
tws_htf_timeframe,
close ,
barmerge.gaps_off,
barmerge.lookahead_on
)
float tws_htf_fast_ema = request.security(
syminfo.tickerid,
tws_htf_timeframe,
ta.ema(close, tws_htf_fast_length) ,
barmerge.gaps_off,
barmerge.lookahead_on
)
float tws_htf_slow_ema = request.security(
syminfo.tickerid,
tws_htf_timeframe,
ta.ema(close, tws_htf_slow_length) ,
barmerge.gaps_off,
barmerge.lookahead_on
)
━━━━━━━━━━━━━━━━━━━━━━
🛡️ Position Architecture
ATR Calculation Length
Controls ATR calculation.
Stop Placement Model
Selects Gap-Protected Stop or Volatility Stop.
Volatility Stop Multiplier
Controls ATR stop distance from entry.
Gap Stop Buffer — ATR
Controls the protective distance beyond the FVG.
Minimum Stop Distance %
Prevents extremely narrow risk zones.
TP1 Risk Multiple
Controls the first target distance.
TP2 Risk Multiple
Controls the second target distance.
TP3 Risk Multiple
Controls the final target distance.
TP1 Position Share %
Controls the internal visual share assigned to TP1.
TP2 Position Share %
Controls the internal visual share assigned to TP2.
TP3 Position Share %
Controls the internal visual share assigned to TP3.
Move Stop to Entry After TP1
Moves the active stop to entry after TP1 according to confirmed lifecycle rules.
Same-Candle Priority
Selects Protective First or Target First.
━━━━━━━━━━━━━━━━━━━━━━
🎨 Chart Design
Color System
Selects Obsidian Signal, Carbon Grid, Ivory Pulse, Neon Voltage, Acid Circuit, or Violet Flux.
Gap Display Mode
Selects Hidden, Selected Gap, or All Active Gaps.
Show Executed FVG Retests
Shows or hides the FVG zone used by a confirmed trade model.
Display TP / SL Areas
Shows or hides the reward and risk boxes.
Keep Completed Trade Areas
Keeps completed model boxes and lines.
Completed Trade History Limit
Controls the maximum historical visual models.
Active Area Projection
Controls the initial right-side projection length.
Chart Layout
Selects Desktop or Mobile.
Signal Label Size
Selects Micro, Compact, Standard, or Large.
Dashboard Size
Selects Micro, Compact, or Standard.
Display Bias EMA
Shows or hides the confirmed HTF fast EMA reference.
Display Setup Dashboard
Shows or hides the bottom-right dashboard.
━━━━━━━━━━━━━━━━━━━━━━
📡 Alert Center
Alert Package
Selects Off, Qualified Entries, Premium Entries, Full Lifecycle, or Webhook JSON.
Alert Direction
Selects Both Directions, Bullish Only, or Bearish Only.
Minimum Alert Grade
Selects All Qualified, A / A+, or A+ Only.
Alert When FVG Is Armed
Enables armed-zone alerts for compatible packages.
Alert When Stop Moves to Entry
Enables breakeven-activation alerts for compatible packages.
━━━━━━━━━━━━━━━━━━━━━━
🧠 WHAT MAKES THIS SCRIPT ORIGINAL
━━━━━━━━━━━━━━━━━━━━━━
FVG Retest Entry Engine uses familiar analytical concepts such as:
• Fair Value Gaps
• swing-point structure
• BOS and CHoCH
• ATR
• volume analysis
• DI / ADX
• higher-timeframe EMA bias
• risk/reward projection
• staged targets
• breakeven management
These concepts are not unique by themselves.
The originality of this script lies in how they are organized into a transparent FVG retest workflow:
Structure confirmation
→ directional FVG memory
→ contextual candidate comparison
→ selected armed zone
→ configurable retest validation
→ reaction-quality evaluation
→ optional volume, DI, and HTF checkpoints
→ setup grading
→ confirmed-close entry commitment
→ three-target visual management
→ optional breakeven movement
→ completed FVG Retest archiving
→ Blocker Lens state reporting
→ Passport explanation
→ lifecycle alerts
Distinctive implementation features include:
• structure-linked FVG selection instead of signaling every gap
• multiple Engine Style profiles
• Original Sync market calibrations
• an armed-zone state before entry
• candidate ranking using several FVG characteristics
• multiple retest models
• a visible reason when an entry is waiting or blocked
• a Passport explaining accepted setup context
• confirmed-close permanent signal commitment
• previous-completed HTF values
• executed FVG zone preservation
• three-stage target management
• Desktop and Mobile display modes
• alert filtering separated from chart calculations
This structure is designed to provide a focused and explainable review process without relying on hidden prediction claims.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ IMPORTANT PRACTICAL NOTES
━━━━━━━━━━━━━━━━━━━━━━
The script’s behavior depends heavily on settings and market conditions.
Signal frequency and visual output may change based on:
• Engine Style
• structure sensitivity
• close-based or wick-based breaks
• break momentum requirements
• minimum FVG width
• displacement filtering
• candidate-score threshold
• previous zone interactions
• FVG lifetime
• retest model
• reaction-strength threshold
• retest delay
• setup expiry
• volume filter settings
• DI / ADX settings
• HTF timeframe and EMA lengths
• minimum setup grade
• stop model
• target multiples
• signal cooldown
• timeframe
• symbol volatility
• market session
• available historical bars
A setting that appears clean on one market may behave differently on another.
A profile that produces suitable frequency on one timeframe may be too strict or too active on another.
Volume behavior can differ across asset classes and data providers.
Higher-timeframe filtering only operates as intended when the selected bias timeframe is genuinely higher than the chart timeframe.
Users should test the exact symbol, timeframe, profile, and session they personally study.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ LIMITATIONS AND SHORTCOMINGS
━━━━━━━━━━━━━━━━━━━━━━
This script has important limitations:
It does not guarantee profitable trades.
It does not predict future price movement.
It does not replace risk management.
It does not execute trades.
It does not place broker orders.
It does not include broker slippage.
It does not include commissions.
It does not include spreads.
It does not include execution delay.
It does not include partial-fill behavior.
It uses bar-based chart data.
Same-candle TP / SL order cannot be known from standard OHLC data.
Same-Candle Priority is a modeling assumption.
Live Preview can change intrabar because the realtime candle is unfinished.
Permanent entry models are committed only after bar close.
Confirmed pivots require future bars before becoming available as confirmed swing points.
The dashboard is not PulseWire Strategy Tester.
The internal target-share model is not account-performance reporting.
Historical boxes and completed labels do not guarantee similar future behavior.
Setup grades are internal classifications, not win probabilities.
Filter settings do not guarantee improved future results.
Higher-timeframe values depend on selected timeframe and available data.
Data-feed revisions or chart-history differences can affect historical calculations.
Alert delivery depends on PulseWire and the user’s alert configuration.
Webhook delivery also depends on the external destination.
One-active-trade logic is a visual management rule, not broker execution logic.
For these reasons, FVG Retest Entry Engine should be used as an educational decision-support and chart-analysis tool, not as a standalone automated trading strategy.
━━━━━━━━━━━━━━━━━━━━━━
👤 WHO THIS SCRIPT MAY BE USEFUL FOR
━━━━━━━━━━━━━━━━━━━━━━
This script may be useful for traders who:
• study Fair Value Gap retests
• use BOS and CHoCH context
• prefer selected FVGs instead of every raw gap
• want a visible armed-zone workflow
• want to understand why a setup is waiting or blocked
• prefer confirmed-close entries
• want a setup-grade framework
• want Entry, SL, TP1, TP2, and TP3 visualization
• want optional breakeven behavior
• want completed FVG Retest models preserved visually
• use higher-timeframe directional context
• want mobile-friendly chart presentation
• use lifecycle alerts for monitoring
• want a structured educational analysis framework
It may be less suitable for users who:
• want guaranteed buy/sell signals
• want a fully automated trading bot
• want every raw FVG to create an entry
• expect one profile to work on every market
• expect grades to represent guaranteed probability
• require exact tick-level execution simulation
• expect visual projections to match broker fills
• expect alerts to execute trades automatically
• want an indicator to replace independent decision-making
━━━━━━━━━━━━━━━━━━━━━━
🧭 BEST PRACTICE SUGGESTIONS
━━━━━━━━━━━━━━━━━━━━━━
For cleaner review:
• Start with Original Sync or Balanced Flow.
• Keep Signal Timing on Confirmed Close.
• Use Selected Gap to reduce chart clutter.
• Enable Blocker Lens while learning the engine workflow.
• Use Compact Passport for concise context.
• Use Detailed Passport when reviewing why a setup qualified.
• Review the armed FVG before the entry appears.
• Check whether the FVG retest agrees with personal market-structure analysis.
• Evaluate the displayed stop against nearby structure and volatility.
• Treat TP1, TP2, and TP3 as planning references only.
• Keep Protective First when a conservative same-candle assumption is preferred.
• Use Precision Flow when fewer, stricter setups are preferred.
• Use Fast Flow only after understanding its higher signal frequency.
• Use Custom Lab only after learning how each threshold affects the engine.
• Use Mobile layout on smaller screens.
• Use alerts for monitoring, not blind execution.
• Always apply independent analysis, risk management, and position sizing.
━━━━━━━━━━━━━━━━━━━━━━
🔓 PUBLICATION NOTE
━━━━━━━━━━━━━━━━━━━━━━
FVG Retest Entry Engine is published as an educational and visual market-analysis tool.
The purpose of this description is to explain:
• what the script does
• how structure events are confirmed
• how three-candle FVGs are detected
• how FVGs are stored and invalidated
• how structure and FVG candidates are linked
• how an FVG becomes armed
• how retest models work
• how reaction quality is evaluated
• how volume, DI / ADX, and HTF checkpoints operate
• how setup grades are assigned
• how Confirmed Close and Live Preview differ
• how Entry and stop levels are calculated
• how TP1, TP2, and TP3 are projected
• how breakeven and same-candle assumptions work
• how active and completed trade areas behave
• what the Passport and Blocker Lens show
• what the dashboard displays
• what the alert packages do
• what the limitations are
• how the indicator should and should not be used
The script is designed to support structured analysis.
It does not promise profitable results.
It does not remove market risk.
It does not execute trades.
It should not be used as a blind buy/sell system.
It is best used as a visual framework for reviewing structure-linked FVG retests and projected risk/reward behavior.
━━━━━━━━━━━━━━━━━━━━━━
🛡️ DISCLAIMER
━━━━━━━━━━━━━━━━━━━━━━
FVG Retest Entry Engine is provided for educational and informational purposes only.
It does not constitute financial, investment, trading, legal, or tax advice.
No indicator can guarantee future results.
Markets are uncertain, conditions change, and historical behavior does not ensure future performance.
Every user is responsible for their own analysis, validation, risk management, position sizing, alert configuration, trading decisions, and broker execution.
The structure labels, FVG zones, armed-zone states, Passport values, Blocker Lens messages, grades, scores, entry references, stop-loss levels, take-profit levels, TP / SL boxes, dashboard values, completed-model labels, and alerts are visual analysis tools only.
Use this script as a structured decision-support and visual review framework, not as a promise of profitability or a substitute for independent judgment.
Indicator
Valid FVG CDRValid FVG CDR is a clean Fair Value Gap (FVG) indicator based on ICT / Smart Money Concepts.
Features:
• Detects valid Bullish and Bearish FVGs
• ATR-based minimum gap filter
• Removes fully mitigated FVGs automatically
• Fixed 20-candle display length
• Clean chart visualization
• Bullish FVG = Green
• Bearish FVG = Red
• Alert support for new FVG creation
• Works on all Forex pairs, Gold (XAUUSD), Indices and Crypto
This indicator is designed to highlight only meaningful Fair Value Gaps while reducing chart clutter.
Indicator
IFVG Sniper Entry Engine [trade_w_samet]🎯 IFVG Sniper Entry Engine
IFVG Sniper Entry Engine is a clean, focused, and structured Inversion Fair Value Gap analysis indicator designed to help traders study filtered IFVG conditions directly on the price chart.
This script focuses on one main concept:
IFVG-based entry visualization.
It is not designed to be a complex all-in-one trading system.
It is not designed to show every possible Fair Value Gap.
It is not designed to generate constant chart noise.
Instead, the goal of IFVG Sniper Entry Engine is to detect filtered Inversion Fair Value Gap events, display clean IFVG+ / IFVG- labels, and visualize a simple active trade projection using one entry level, one stop-loss level, and one take-profit level.
The indicator includes:
• Inversion Fair Value Gap detection
• Filtered IFVG selection
• Bullish IFVG+ and bearish IFVG- chart labels
• Thin blue bullish IFVG lines
• Thin red bearish IFVG lines
• Adjustable IFVG label size
• ATR-based stop-loss projection
• Selectable take-profit RR from 1R to 6R
• Active TP / SL visual box
• One-active-trade-at-a-time logic
• Confirmed-candle IFVG processing
• IFVG invalidation handling
• Simple dashboard
• Professional alert conditions
The purpose of this script is to help users visually study where an FVG has inverted and whether that inversion may create a structured review point on the chart.
It should be treated as a chart-analysis and educational decision-support tool.
It is not financial advice.
It is not an automated trading system.
It does not guarantee profitable trades.
It does not execute broker orders.
It does not replace personal analysis, risk management, or trade validation.
━━━━━━━━━━━━━━━━━━━━━━
📌 OVERVIEW
━━━━━━━━━━━━━━━━━━━━━━
At a high level, IFVG Sniper Entry Engine does the following:
• Detects bullish and bearish Fair Value Gaps.
• Stores valid hidden FVG zones in memory.
• Watches for price to invert those zones.
• Confirms bullish IFVG when a bearish FVG is broken upward.
• Confirms bearish IFVG when a bullish FVG is broken downward.
• Applies an optional IFVG quality filter.
• Draws only filtered IFVGs on the chart.
• Displays IFVG+ for bullish IFVG events.
• Displays IFVG- for bearish IFVG events.
• Projects one active entry, stop-loss, and take-profit box.
• Allows only one active trade projection at a time.
• Removes the active TP/SL box after TP or SL is reached.
• Tracks basic visual trade outcome statistics in the dashboard.
• Provides alert conditions for IFVG entries and IFVG formations.
The script is intentionally built to be simple and focused.
It does not include multiple take-profit levels.
It does not include machine-learning optimization.
It does not include hidden performance promises.
It does not attempt to predict the future.
It provides a structured way to visualize filtered IFVG events and their projected trade model.
━━━━━━━━━━━━━━━━━━━━━━
🧠 CORE IDEA
━━━━━━━━━━━━━━━━━━━━━━
The core idea behind IFVG Sniper Entry Engine is based on Inversion Fair Value Gaps.
A Fair Value Gap represents an imbalance area created when price moves aggressively enough to leave a gap-like inefficiency between candles.
An Inversion Fair Value Gap occurs when price later breaks through a previously formed FVG in the opposite direction.
This can be useful for traders who study:
• market imbalance
• failed displacement zones
• price repricing behavior
• continuation after inversion
• possible shift in directional pressure
• clean chart-based trade planning
The script does not treat every FVG as important.
Instead, it stores FVGs and waits for inversion behavior.
Then it filters the IFVG event using quality conditions such as gap size, candle body strength, candle range, and clean break logic.
The goal is not to show more signals.
The goal is to reduce noise and highlight cleaner IFVG conditions.
━━━━━━━━━━━━━━━━━━━━━━
🧩 WHY THIS SCRIPT IS NOT A SIMPLE BUY/SELL INDICATOR
━━━━━━━━━━━━━━━━━━━━━━
IFVG Sniper Entry Engine is not intended to be used as a blind buy/sell system.
The script is structured as a visual review workflow:
Fair Value Gap forms
→ FVG is stored in memory
→ price later breaks through the opposite side
→ inversion is detected
→ IFVG quality filter is checked
→ IFVG+ or IFVG- is displayed
→ active entry / SL / TP projection is drawn
→ trade box extends while active
→ result is tracked visually
→ box is removed after TP or SL
Each part has a specific purpose.
The FVG memory system stores imbalance zones.
The inversion logic checks whether price has broken the opposite side of the stored zone.
The filter system attempts to reduce weaker IFVG events.
The entry model gives a simple visual planning level.
The ATR stop-loss model creates a consistent risk reference.
The RR setting controls the projected target distance.
The dashboard summarizes the current state.
The alert system helps monitor confirmed events.
This makes the script a structured IFVG review tool, not a guaranteed trade signal generator.
━━━━━━━━━━━━━━━━━━━━━━
⚙️ HOW THE SCRIPT WORKS
━━━━━━━━━━━━━━━━━━━━━━
The script first detects normal bullish and bearish Fair Value Gaps.
A bullish FVG is detected when the current candle structure leaves an imbalance above the candle from two bars earlier.
A bearish FVG is detected when the current candle structure leaves an imbalance below the candle from two bars earlier.
Once a raw FVG is detected, the script stores:
• top of the FVG
• bottom of the FVG
• original FVG direction
• age of the FVG
• gap size relative to ATR
• candle body ratio
• candle range relative to ATR
These values are stored internally and are later used when an inversion happens.
The script then waits for price to break through the stored FVG in the opposite direction.
For a bullish IFVG:
A previously bearish FVG must be broken upward.
For a bearish IFVG:
A previously bullish FVG must be broken downward.
When inversion is detected, the script checks whether the IFVG passes the selected filter mode.
Only filtered IFVGs are displayed on the chart.
━━━━━━━━━━━━━━━━━━━━━━
🔵 BULLISH IFVG+ LOGIC
━━━━━━━━━━━━━━━━━━━━━━
A bullish IFVG+ appears when a previously bearish Fair Value Gap is inverted to the upside.
In practical terms, the script looks for a stored bearish FVG and then checks whether price closes above the top boundary of that FVG.
If the selected filter conditions are satisfied, the script draws:
• a thin blue IFVG line
• an IFVG+ label
• a bullish active trade projection if no trade is already active
The bullish trade projection uses:
• entry level
• ATR-based stop-loss below entry
• selected RR-based take-profit above entry
This does not mean price must continue upward.
It only means the script detected a bullish IFVG condition based on its internal rules.
━━━━━━━━━━━━━━━━━━━━━━
🔴 BEARISH IFVG- LOGIC
━━━━━━━━━━━━━━━━━━━━━━
A bearish IFVG- appears when a previously bullish Fair Value Gap is inverted to the downside.
In practical terms, the script looks for a stored bullish FVG and then checks whether price closes below the bottom boundary of that FVG.
If the selected filter conditions are satisfied, the script draws:
• a thin red IFVG line
• an IFVG- label
• a bearish active trade projection if no trade is already active
The bearish trade projection uses:
• entry level
• ATR-based stop-loss above entry
• selected RR-based take-profit below entry
This does not mean price must continue downward.
It only means the script detected a bearish IFVG condition based on its internal rules.
━━━━━━━━━━━━━━━━━━━━━━
💎 IFVG FILTER SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
The script includes an IFVG filter system to reduce chart noise.
This is important because not every inversion is meaningful.
The filter system can be set to:
Off
Loose
Balanced
Strict
Custom
Off mode shows all detected IFVG events.
Loose mode allows more IFVGs and uses lower quality requirements.
Balanced mode is the default middle-ground setting.
Strict mode requires stronger IFVG conditions and will show fewer signals.
Custom mode allows the user to manually control the filter thresholds.
The filter evaluates:
• minimum gap size relative to ATR
• minimum candle body ratio
• minimum candle range relative to ATR
• clean break buffer relative to ATR
This creates a more selective IFVG workflow.
The filter does not guarantee better future outcomes.
It only controls how strict the script is before displaying an IFVG.
━━━━━━━━━━━━━━━━━━━━━━
📏 GAP / ATR FILTER
━━━━━━━━━━━━━━━━━━━━━━
The gap filter measures the original Fair Value Gap size relative to ATR.
This helps avoid very small imbalance zones that may not be meaningful on the selected chart.
A larger minimum gap requirement makes the indicator more selective.
A smaller minimum gap requirement allows more IFVGs.
The default Balanced setting uses a moderate gap requirement.
Users can adjust this in Custom mode.
━━━━━━━━━━━━━━━━━━━━━━
🕯️ BODY RATIO FILTER
━━━━━━━━━━━━━━━━━━━━━━
The body ratio filter measures the candle body compared to the full candle range.
This helps evaluate whether the candle that created the FVG had meaningful directional pressure.
A stronger body ratio requirement can reduce weaker candles.
A lower body ratio requirement allows more setups.
This is not a prediction tool.
It is only a candle-quality filter.
━━━━━━━━━━━━━━━━━━━━━━
📊 RANGE / ATR FILTER
━━━━━━━━━━━━━━━━━━━━━━
The range filter measures the candle’s full range relative to ATR.
This helps the script avoid very small candles that may not represent meaningful displacement.
A higher range/ATR requirement makes the script more selective.
A lower range/ATR requirement increases the number of visible IFVGs.
The value should be adjusted based on symbol volatility and timeframe.
━━━━━━━━━━━━━━━━━━━━━━
🧼 CLEAN BREAK FILTER
━━━━━━━━━━━━━━━━━━━━━━
The clean break filter requires price to break beyond the IFVG boundary by an ATR-based buffer.
This helps avoid very small boundary touches.
For bullish IFVGs, price must close above the stored FVG top plus the clean break buffer.
For bearish IFVGs, price must close below the stored FVG bottom minus the clean break buffer.
The clean break buffer can be controlled in Custom mode.
A higher buffer makes the inversion requirement stricter.
A lower buffer allows more IFVG events.
━━━━━━━━━━━━━━━━━━━━━━
🎯 ENTRY MODEL
━━━━━━━━━━━━━━━━━━━━━━
When a filtered IFVG appears and no active trade is already open, the script creates a visual trade projection.
The entry can be based on:
IFVG Line
Confirmation Close
IFVG Line mode uses the selected IFVG line price as the projected entry reference.
Confirmation Close mode uses the candle close that confirmed the IFVG.
The entry is only a visual reference.
It is not a broker order.
It does not mean the user must enter a trade.
It is designed to help users review how the IFVG setup would look with a structured risk/reward model.
━━━━━━━━━━━━━━━━━━━━━━
🛑 ATR STOP-LOSS MODEL
━━━━━━━━━━━━━━━━━━━━━━
The stop-loss projection is based on ATR.
The main settings are:
ATR Length
SL ATR Multiplier
For bullish IFVG entries, the stop-loss is projected below the entry.
For bearish IFVG entries, the stop-loss is projected above the entry.
ATR is used because market volatility changes across symbols and timeframes.
A higher SL ATR multiplier creates a wider visual risk area.
A lower SL ATR multiplier creates a tighter visual risk area.
This stop-loss level is a visual projection only.
It does not place an order.
It does not guarantee that the level is appropriate for every trader or every market.
━━━━━━━━━━━━━━━━━━━━━━
🎯 TAKE-PROFIT RR MODEL
━━━━━━━━━━━━━━━━━━━━━━
The script uses one take-profit level.
There are no TP1, TP2, or TP3 levels.
The take-profit is calculated from the projected risk distance.
Available RR options:
1R
2R
3R
4R
5R
6R
Default:
3R
For bullish IFVG entries, TP is projected above entry.
For bearish IFVG entries, TP is projected below entry.
The RR setting only controls the visual projected target distance.
It should not be interpreted as a recommendation or guarantee.
Users should decide whether the projected target makes sense based on their own analysis, market structure, liquidity, session, volatility, and risk plan.
━━━━━━━━━━━━━━━━━━━━━━
📦 ACTIVE TP / SL BOX SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
When a new valid IFVG entry appears, the script draws a clean active TP / SL visual model.
The visual model includes:
• TP box
• SL box
• entry line
• stop-loss line
• take-profit line
• ENTRY label
• SL label
• TP label
The TP/SL box remains visible only while the trade projection is active.
While the trade is active, the box extends to the right as new candles form.
When TP or SL is reached, the active trade box is removed from the chart.
This means historical TP/SL boxes are not kept.
The chart remains cleaner and only the active trade projection is visible.
━━━━━━━━━━━━━━━━━━━━━━
🚦 ONE ACTIVE TRADE AT A TIME
━━━━━━━━━━━━━━━━━━━━━━
The script includes one-active-trade-at-a-time logic.
If a trade projection is active, the script will not open another trade projection until the active one reaches TP or SL.
However, new filtered IFVG lines can still appear on the chart.
This design separates:
• IFVG detection
• trade projection permission
An IFVG can appear while a trade is active, but it will not create a new active TP/SL box.
The dashboard tracks blocked IFVG events internally.
This helps keep the chart structured and avoids multiple overlapping trade boxes.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ SAME-CANDLE TP / SL HANDLING
━━━━━━━━━━━━━━━━━━━━━━
If TP and SL are both touched on the same candle, the true intrabar sequence cannot be known from standard OHLC chart data.
This script uses a conservative assumption:
SL is counted first.
This avoids overly optimistic historical visual results when the actual intrabar order is unknown.
Users should understand that this is still a bar-based assumption.
It does not represent broker execution.
It does not include spread, slippage, commissions, order delay, or partial fills.
━━━━━━━━━━━━━━━━━━━━━━
🏷️ IFVG LABELS
━━━━━━━━━━━━━━━━━━━━━━
The script uses simple IFVG labels:
IFVG+
IFVG-
IFVG+ represents a bullish Inversion Fair Value Gap.
IFVG- represents a bearish Inversion Fair Value Gap.
The label size can be adjusted from the settings.
Available label sizes:
Tiny
Small
Normal
Large
Huge
The default label size is Large.
This allows users to adjust visibility depending on chart zoom, monitor size, and visual preference.
━━━━━━━━━━━━━━━━━━━━━━
📍 IFVG LINE PRICE MODES
━━━━━━━━━━━━━━━━━━━━━━
The IFVG line can be drawn using different price references.
Available modes:
Broken Boundary
Confirmation Close
Midpoint
Broken Boundary mode draws the line at the boundary that was broken during inversion.
Confirmation Close mode draws the line at the candle close that confirmed the IFVG.
Midpoint mode draws the line at the midpoint of the original FVG zone.
Each mode gives a different way to visualize the IFVG reference level.
There is no universally best option.
Users should choose the line mode that best matches their own review method.
━━━━━━━━━━━━━━━━━━━━━━
🧹 IFVG INVALIDATION
━━━━━━━━━━━━━━━━━━━━━━
The script can automatically remove invalidated IFVG lines.
For bullish IFVGs, invalidation occurs when price closes back below the lower boundary of the IFVG zone.
For bearish IFVGs, invalidation occurs when price closes back above the upper boundary of the IFVG zone.
This helps keep the chart cleaner by removing IFVG levels that are no longer valid according to the script’s internal logic.
Users can disable this setting if they prefer to keep IFVG lines visible.
━━━━━━━━━━━━━━━━━━━━━━
📟 DASHBOARD
━━━━━━━━━━━━━━━━━━━━━━
The script includes a compact dashboard.
The dashboard displays:
• selected filter mode
• selected label size
• last signal direction
• active trade status
• selected RR
• latest entry level
• latest SL level
• latest TP level
• active box state
• filtered IFVG count
• trades / wins / losses
The dashboard is designed to provide a quick summary of the current script state.
It is not a full performance report.
It is not a replacement for PulseWire Strategy Tester.
It is a visual summary based on the script’s internal bar-based projection logic.
━━━━━━━━━━━━━━━━━━━━━━
🚨 ALERT SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
IFVG Sniper Entry Engine includes alert conditions for:
Bullish IFVG Entry
Bearish IFVG Entry
Bullish IFVG+ formed
Bearish IFVG- formed
The entry alerts are triggered when a filtered IFVG creates a new active trade projection.
The IFVG formation alerts are triggered when filtered IFVG+ or IFVG- conditions appear.
Alerts are monitoring tools only.
They do not execute trades.
They do not place broker orders.
Users must confirm all alerts with their own analysis and risk management.
━━━━━━━━━━━━━━━━━━━━━━
🔔 HOW TO USE ALERTS
━━━━━━━━━━━━━━━━━━━━━━
A practical alert workflow:
1. Add IFVG Sniper Entry Engine to your chart.
2. Open PulseWire’s alert window.
3. Select the indicator as the alert condition.
4. Choose the desired alert type.
5. Select alert frequency according to your preference.
6. Use alerts for monitoring only.
7. Confirm each alert manually before making any trading decision.
Alerts may behave differently depending on timeframe, symbol, session, and real-time candle updates.
━━━━━━━━━━━━━━━━━━━━━━
🧪 HOW TO USE THE INDICATOR
━━━━━━━━━━━━━━━━━━━━━━
A practical workflow:
1. Add IFVG Sniper Entry Engine to your chart.
2. Start with the default Balanced filter mode.
3. Review the visible IFVG+ and IFVG- labels.
4. Check whether the IFVG appears in a meaningful market context.
5. Review the active TP/SL projection if a trade model appears.
6. Use the selected RR level as a visual planning reference only.
7. Avoid treating every IFVG as a trade.
8. Combine the tool with your own market structure, liquidity, trend, session, and risk-management rules.
9. Use alerts for monitoring, not automatic execution.
10. Test the indicator on the exact markets and timeframes you personally study.
The indicator is best used as a structured IFVG review tool.
It should not be used as a blind execution system.
━━━━━━━━━━━━━━━━━━━━━━
⚙️ SETTINGS REFERENCE
━━━━━━━━━━━━━━━━━━━━━━
⚙️ IFVG Engine
Hidden FVG Memory
Controls how many raw FVGs can be stored internally.
Max Hidden FVG Age
Controls how long a hidden FVG remains eligible for inversion.
Minimum FVG Size / Ticks
Sets the minimum raw FVG size using ticks.
Max Visible IFVG
Controls how many IFVG lines and labels can remain visible.
IFVG Line Length Bars
Controls how far the IFVG line extends to the right.
IFVG Line Price
Controls whether the IFVG line is drawn from Broken Boundary, Confirmation Close, or Midpoint.
Delete Invalidated IFVG
Removes IFVG lines when the script detects invalidation.
━━━━━━━━━━━━━━━━━━━━━━
💎 IFVG Filter
IFVG Filter Mode
Controls how selective the IFVG display logic is.
Available modes:
Off
Loose
Balanced
Strict
Custom
Custom Minimum Gap / ATR
Defines the minimum FVG gap size relative to ATR when Custom mode is selected.
Custom Minimum Body Ratio
Defines the minimum body-to-range ratio when Custom mode is selected.
Custom Minimum Range / ATR
Defines the minimum candle range relative to ATR when Custom mode is selected.
Custom Clean Break Buffer / ATR
Defines the ATR-based clean break buffer when Custom mode is selected.
━━━━━━━━━━━━━━━━━━━━━━
🎯 IFVG Entry Model
Entry Price
Controls whether entry is based on IFVG Line or Confirmation Close.
ATR Length
Defines the ATR length used for risk calculation.
SL ATR Multiplier
Controls the distance of the projected stop-loss.
Take Profit RR
Controls the projected take-profit distance.
Available RR values:
1R
2R
3R
4R
5R
6R
Initial TP / SL Box Length
Controls the initial box length when a new active trade projection appears.
━━━━━━━━━━━━━━━━━━━━━━
🎨 Visual Style
Bullish IFVG Blue
Controls the color of bullish IFVG+ lines and labels.
Bearish IFVG Red
Controls the color of bearish IFVG- lines and labels.
IFVG Label Size
Controls the size of IFVG+ and IFVG- labels.
Entry Line Color
Controls the entry line color.
SL Color
Controls the stop-loss box and line color.
TP Color
Controls the take-profit box and line color.
Dashboard Background
Controls the dashboard background color.
Dashboard Text
Controls the dashboard text color.
━━━━━━━━━━━━━━━━━━━━━━
📟 Dashboard
Show Dashboard
Shows or hides the compact dashboard.
━━━━━━━━━━━━━━━━━━━━━━
🧠 WHAT MAKES THIS SCRIPT ORIGINAL
━━━━━━━━━━━━━━━━━━━━━━
IFVG Sniper Entry Engine uses familiar market concepts such as:
• Fair Value Gaps
• Inversion Fair Value Gaps
• ATR-based risk projection
• risk/reward planning
• label-based visual mapping
• active trade visualization
• alert monitoring
These concepts are not unique by themselves.
The originality of this script lies in how they are organized into a clean IFVG workflow:
Raw FVG detection
→ hidden FVG memory
→ inversion confirmation
→ IFVG quality filter
→ IFVG+ / IFVG- display
→ one-active-trade rule
→ ATR stop-loss projection
→ selectable RR target
→ active-only TP/SL box
→ compact dashboard
→ alerts
This structure is designed to give users a focused way to review filtered IFVG conditions without unnecessary chart clutter.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ IMPORTANT PRACTICAL NOTES
━━━━━━━━━━━━━━━━━━━━━━
The script’s behavior depends heavily on settings.
Signal frequency and visual output may change based on:
• filter mode
• ATR length
• SL multiplier
• RR selection
• IFVG line mode
• minimum gap settings
• candle body settings
• range/ATR settings
• clean break buffer
• timeframe
• symbol volatility
• market session
• available historical bars
A setting that looks clean on one symbol may behave differently on another.
A setting that appears useful on one timeframe may not be useful on another.
Users should test the script on the exact markets and timeframes they personally study.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ LIMITATIONS AND SHORTCOMINGS
━━━━━━━━━━━━━━━━━━━━━━
This script has important limitations:
It does not guarantee profitable trades.
It does not predict future price movement.
It does not replace risk management.
It does not execute trades.
It does not place broker orders.
It does not include broker slippage.
It does not include commissions.
It does not include spreads.
It does not include order delay.
It does not include partial fills.
It uses bar-based chart data.
Same-candle TP/SL order cannot be known from standard OHLC data.
The dashboard is not PulseWire Strategy Tester.
The TP/SL boxes are visual projections only.
Alerts are monitoring tools only.
Historical visual behavior does not ensure future behavior.
Filter settings do not guarantee better results.
One-active-trade logic is a visual management rule, not broker execution logic.
For these reasons, IFVG Sniper Entry Engine should be used as an educational decision-support and chart-analysis tool, not as a standalone trading strategy.
━━━━━━━━━━━━━━━━━━━━━━
👤 WHO THIS SCRIPT MAY BE USEFUL FOR
━━━━━━━━━━━━━━━━━━━━━━
This script may be useful for traders who:
• study IFVG concepts
• study Fair Value Gap inversions
• want cleaner IFVG chart visuals
• prefer filtered signals instead of every raw IFVG
• want a simple one-TP projection model
• want ATR-based risk visualization
• want one active trade projection at a time
• want active-only TP/SL boxes
• want IFVG+ and IFVG- labels
• want alert-based monitoring
• want a focused educational analysis tool
It may be less suitable for users who:
• want guaranteed buy/sell signals
• want a fully automated trading bot
• want many take-profit levels
• want every raw FVG displayed
• expect one setting to work on every market
• expect alerts to execute trades
• expect visual projections to match broker execution
• want an indicator that replaces personal decision-making
━━━━━━━━━━━━━━━━━━━━━━
🧭 BEST PRACTICE SUGGESTIONS
━━━━━━━━━━━━━━━━━━━━━━
For cleaner review:
• Start with the default Balanced filter mode.
• Use Strict mode if the chart is too noisy.
• Use Loose mode if the chart shows too few IFVGs.
• Use Custom mode only after understanding how each filter affects signal frequency.
• Review IFVGs together with market structure.
• Check whether the IFVG appears near meaningful liquidity or displacement context.
• Do not treat every IFVG+ or IFVG- as a trade.
• Use the TP/SL box as a visual planning tool only.
• Keep expectations realistic.
• Use alerts for monitoring, not automatic execution.
• Always apply independent analysis and risk management.
━━━━━━━━━━━━━━━━━━━━━━
🔓 PUBLICATION NOTE
━━━━━━━━━━━━━━━━━━━━━━
IFVG Sniper Entry Engine is published as an educational and visual market-analysis tool.
The purpose of this description is to explain:
• what the script does
• how IFVG conditions are detected
• how IFVG filters work
• how IFVG+ and IFVG- labels are created
• how the entry model is projected
• how the ATR stop-loss model works
• how the RR-based take-profit is calculated
• how the active TP/SL box behaves
• how the one-active-trade rule works
• what the dashboard shows
• what the alerts do
• what the limitations are
• how the indicator should and should not be used
The script is designed to support structured analysis.
It does not promise profitable results.
It does not remove market risk.
It does not execute trades.
It should not be used as a blind buy/sell system.
It is best used as a visual framework for reviewing filtered Inversion Fair Value Gap conditions and projected risk/reward behavior.
━━━━━━━━━━━━━━━━━━━━━━
🛡️ DISCLAIMER
━━━━━━━━━━━━━━━━━━━━━━
IFVG Sniper Entry Engine is provided for educational and informational purposes only.
It does not constitute financial, investment, or trading advice.
No indicator can guarantee future results.
Markets are uncertain, conditions change, and historical behavior does not ensure future performance.
Every user is responsible for their own analysis, validation, risk management, position sizing, and trading decisions.
The IFVG+ labels, IFVG- labels, active TP/SL boxes, dashboard values, RR projections, stop-loss projections, and alerts are visual analysis tools only.
Use this script as a structured decision-support and visual review framework, not as a promise of profitability.
Indicator
Compass | AnonycryptousCompass | Anonycryptous
Description & user manual
Credits
The weekly psychological level calculation in this indicator is based on open-source code originally published on PulseWire. The original script was created by plasmapug. Continued development was done by infernixx, Peshocore, and xtech5192 in collaboration with TradersReality. Significant modifications have been made to integrate this component into the Compass framework.
Why this indicator is different
Most indicators answer one question. A moving average tells you the trend direction. An oscillator tells you momentum. A session box tells you the time. A volume indicator tells you participation. Each one is useful. None of them tells you where you are.
Before placing a trade, a trader needs to answer several questions simultaneously. What session is active and what does that mean for the type of price action to expect? Where does the macro trend stand? Is volume confirming the move or contradicting it? Are there open imbalances nearby that price may return to? How much of the day's expected range has already been consumed? Where are the key structural levels — pivots, the daily open, prior week references?
Answering each of these questions separately requires stacking tool after tool until the chart becomes unreadable. Compass answers all of them at once.
It is not a signal indicator. It does not fire arrows or tell you when to buy or sell. What it does is something more fundamental: it gives you a complete read of the market environment before any decision is made. Sessions, trend, volume, imbalances, range levels, pivots, psychological references — all in one overlay, all configurable, all on one chart.
The design philosophy is orientation first. Decision second. Compass tells you where you are. What you do with that is your responsibility.
Important notice
Compass does not generate trading signals.
It does not tell you when to buy or sell.
It does not predict market direction.
It does not replace your trading strategy or your own analysis.
All illustrative examples in this manual are for educational purposes only and are not trading recommendations.
All trading decisions remain entirely with the user.
Always apply your own judgment and manage your own risk.
1. Overview
Compass is a comprehensive market context indicator that combines eleven independent analysis frameworks into one unified overlay. Every component is individually toggleable. Six presets are included for different trading styles, from fast scalping to full multi-component analysis.
What it includes:
- Five-EMA suite with adaptive cloud around the EMA 50
- EMA crossover system with configurable signals and candle coloring
- Stochastic RSI background alerts with four alert types and RSI divergence detection
- PVSRA volume vector candle analysis with zone tracking and configurable thresholds
- Eight global market sessions with automatic DST awareness
- Average daily, weekly, and monthly range levels with 50% midpoints
- Classic pivot points with mid-point levels
- Daily open reference line with historical opens
- Fair value gap detection with partial absorption tracking
- Weekly psychological level tracking
- Live dashboard with eighteen data points across all active components
2. EMA suite
Five exponential moving averages are plotted simultaneously: EMA 5, EMA 13, EMA 50, EMA 200, and EMA 800. Together they cover short-term momentum, medium-term trend direction, macro trend, and long-term structural bias.
The EMA 50 is wrapped in a dynamic cloud calculated from two standard deviations of price. The cloud expands during volatility and contracts during consolidation. A widening cloud indicates active price discovery. A thinning cloud indicates equilibrium or compression before a directional move.
The EMA 200 is the primary macro bias filter. Price above it defines a broadly bullish environment. Price below it defines a broadly bearish environment. This is shown in the dashboard at all times.
The EMA 800 provides long-term structural context, particularly useful on mid to higher timeframes where it marks the gravitational center of multi-month price structure.
All five EMA lengths are configurable. Each has individual color and transparency controls. An EMA label option displays the current value at the right edge of each line.
3. EMA cross system
The EMA cross tracks a configurable fast EMA crossing a configurable slow EMA and marks the crossover bar. All candles after a cross continue in the direction of that cross until the opposite cross fires.
Three display modes are available: show both the fast and slow EMA lines, show a single consolidated EMA line, or hide the EMA lines entirely while keeping the crossover signals visible.
This component is a trend state indicator, not a trade trigger. A bull cross does not mean buy. It means the short-term trend has shifted upward relative to the medium-term average.
Signals and candle coloring can be toggled independently.
4. Stochastic RSI
The stochastic RSI component runs a standard stochastic RSI calculation and generates background color alerts based on crossover conditions at configurable band levels.
Four alert types are available, each independently toggleable:
Middle band crossover — K line crosses D line near the 50 level. Indicates a possible trend shift in momentum.
Overbought/oversold crossover — K line crosses D line from overbought or oversold territory. Indicates a potential reversal from an extreme.
Entering overbought — K line crosses above the upper band. Indicates that momentum has moved into overbought territory.
Entering oversold — K line crosses below the lower band. Indicates that momentum has moved into oversold territory.
The dashboard displays the current stochastic RSI state and the RSI value. RSI appears in green when above the midline and in red when below. Regular bullish and bearish divergence is detected automatically and shown in the dashboard as a directional label. When divergence is active, a thin reference line appears on the price chart marking the divergence candles.
5. PVSRA volume vector analysis
PVSRA analysis colors candles based on volume relative to the 10-bar average and the relationship between volume and candle spread.
Four vector types:
Green vector — bullish bar where volume is at or above the green/red threshold (default 200% of the 10-bar average), or where volume multiplied by spread is the highest of the last 10 bars. Indicates strong bullish institutional participation.
Red vector — same conditions on a bearish bar. Indicates strong bearish institutional participation.
Blue vector — bullish bar where volume is at or above the blue/violet threshold (default 150% of average). Indicates elevated bullish volume below the institutional threshold.
Violet vector — same conditions on a bearish bar. Indicates elevated bearish volume.
Grey — no vector conditions met. Normal volume.
Both thresholds are configurable directly from the settings panel. Blue and violet signals are strictly exclusive from green and red — a bar cannot qualify for both simultaneously.
Vector candle zones draw boxes at each vector candle location and remain active until price moves through the zone, marking areas where elevated institutional activity was detected at the time the candle formed.
The PVSRA override input allows a different symbol to be used for the volume calculation. This is useful when the charted instrument has unreliable volume data, such as CFDs, perpetual swaps, or instruments where the primary volume is on a related market.
6. Market sessions
Eight global trading sessions are tracked simultaneously, each with automatic DST awareness. Sessions are displayed as expanding boxes with high and low lines and a real-time label showing the session open.
Sessions included:
- London: 08:00–16:30 UTC
- New York: 14:30–21:00 UTC
- Tokyo: 00:00–06:00 UTC
- Hong Kong: 01:30–08:00 UTC
- Sydney: 22:00–06:00 UTC
- EU brinks: 08:00–09:00 UTC
- US brinks: 14:00–15:00 UTC
- Frankfurt: 07:00–16:30 UTC
DST is handled automatically for London, New York, and Sydney. No manual adjustment is needed. Each session can be toggled individually, and box color, transparency, and label color are fully configurable per session.
Session context matters because market behavior differs significantly depending on which participants are active. London and New York overlap produces the highest volume and fastest price movement. Tokyo and Sydney sessions tend to consolidate. The brinks windows mark the transition periods where session highs and lows often form.
7. Range levels
Three statistical range frameworks measure the expected price range for the current period based on historical averages.
Average daily range (ADR) — the expected high and low for the current trading day. When price reaches the ADR level, the day's expected range has been consumed. Moves beyond the ADR are extension moves that occur with lower statistical probability and often mean-revert. The dashboard shows ADR % used — how much of today's expected range has already been consumed. Above 80% indicates the day is approaching its expected limit.
Average weekly range (AWR) — the same concept applied to the current week. Useful for assessing how much room the week has left to move.
Average monthly range (AMR) — the same concept applied to the current month. Provides macro context for position sizing and target expectations.
Each framework includes a 50% midpoint level marking the center of the expected range. The ADR measure from daily open option calculates the range starting from that day's open price rather than the statistical high, making the levels static for the entire day.
All three frameworks have individual lookback period inputs, color controls, line styles, and label toggles.
8. Pivot points
Classic pivot points are calculated from the prior day's high, low, and close. Levels include PP, R1/S1, R2/S2, R3/S3, and M mid-point levels between each major level.
Pivot points provide structural reference for the current session. Price above PP defines a broadly bullish day structure. R levels act as potential resistance targets. S levels act as potential support targets. M levels provide intermediate precision references between major pivots.
All levels can be toggled individually. Lines extend rightward from the prior session and can optionally extend in both directions. Each level has individual color and line style controls.
9. Daily open
A horizontal line marks the current day's opening price. This is one of the most referenced structural levels among short-term traders because it defines the starting point for the day's price discovery.
Price above the daily open reflects a bullish session bias. Price below reflects a bearish session bias. When price oscillates around the daily open without committing direction, the session is in balance — a lower probability environment for trend trades.
Historical daily opens can optionally be shown as reference for prior day context.
10. Fair value gaps
A fair value gap is a three-bar imbalance where price moved through a range without leaving two-sided trade — the low of the upper candle is above the high of the lower candle (bullish gap) or vice versa (bearish gap). These areas represent unfinished business where the market may return to achieve balance.
Gaps are filtered by a minimum width threshold expressed as a multiple of ATR. Gaps narrower than the threshold are excluded. Partial absorption is tracked — as price returns into the gap, the fill color changes to show how much of the imbalance has been recovered.
Fully mitigated gaps can be kept on the chart as historical reference or deleted automatically to maintain a clean view.
11. Psychological levels
Weekly psychological levels mark the prior week's high and low as calculated by a specific session-anchored method. These levels represent deliberate structural references where participants have previously committed size — breakouts and rejections around these levels tend to be more intentional than random price noise.
Three GMT offset options accommodate the session anchor calculation for different global market structures. Two mode options are available: crypto (weekly reset on Saturday Sydney open) and forex (weekly reset on Monday Tokyo open).
12. Settings reference
Preset
- Custom: full manual control over all settings.
- Clean scalper: sessions, EMA suite, FVG, subtle candle coloring. Low noise.
- Full context: everything on, medium transparency. Best for analysis.
- Signal focus: EMA cross, stoch RSI background, PVSRA bar color prominent. Rest subtle.
- Minimal: sessions, daily open, ADR only. No signals.
- PVSRA pro: PVSRA and vector candle zones central. EMA 200 and 800 only.
Global settings
- Master opacity offset (custom preset only): shifts all transparency values simultaneously.
- Show bull/bear label text: shows or hides text on EMA cross signal triangles.
EMA suite
- Show EMA suite and labels
- Individual EMA color and transparency controls
- EMA cloud fill and border transparency
- EMA line width
EMA cross
- Show EMA cross signals
- Fast EMA, slow EMA, and consolidated EMA lengths
- Show both EMAs or consolidated only
- Bull, bear, and neutral colors and transparency
- Cross EMA line width
Stochastic RSI
- Show stochastic RSI background alerts
- RSI length and stochastic length
- Overbought and oversold band levels
- Individual alert type toggles (four types)
- Alert colors and transparency
- RSI divergence lookback period
- Divergence line color and width
PVSRA
- Vector colors (red, green, violet, blue, regular up/down)
- Green/red threshold (× average volume, default 2.0)
- Blue/violet threshold (× average volume, default 1.5)
- Include spread filter for green/red classification
- Override symbol toggle and input
- Show vector candle zones with transparency and width settings
Candle coloring
- Enable candle coloring
- Coloring mode: EMA cross / PVSRA / EMA 200 / off
- Bull and bear candle color and transparency
Market sessions
- Show market sessions
- Session timezone
- Show sessions on weekends
- Session high/low line style and width
- Per session: toggle, box color, transparency, label color
Range levels
- Show ADR, AWR, AMR (individual toggles)
- Lookback periods for each
- Show 50% midpoint levels
- Measure from daily open (ADR only)
- Color, transparency, line width, line style, labels
Pivot points
- Show PP, R1/S1, R2/S2, R3/S3, M levels individually
- Show labels
- Extend lines both directions
- Individual level colors and line styles
- Pivot line width
Daily open
- Show daily open
- Show label
- Show historical daily opens
- Color, transparency, line width
Fair value gaps
- Show fair value gaps
- Width filter (ATR multiplier)
- Extend to current bar
- Bullish and bearish FVG colors
- Mitigation fill colors
- Keep historical FVGs after mitigation
Psychological levels
- Show psy levels and labels
- Show historical psy levels
- GMT offset (GMT+1, GMT+2, GMT+3)
- Psy type: crypto or forex
- High and low colors and transparency
Dashboard
- Show dashboard
- Position: top left, top right, bottom left, bottom right
- Size: tiny, small, normal
13. Dashboard reference
The dashboard provides eighteen live data points across all active components:
Session — the currently active market session.
EMA cross — current EMA cross direction: bull or bear.
EMA 200 — whether price is above or below the EMA 200.
Stoch RSI — current stochastic RSI condition.
RSI — current RSI value, colored green above midline and red below.
RSI divergence — active bullish or bearish divergence, or none.
PVSRA — current candle vector type.
ADR % used — how much of today's expected daily range has been consumed.
FVG active — count of open unmitigated fair value gaps and mitigation percentage.
Psy level — whether price is above or below the prior week's psychological level.
Timezone — active session timezone setting.
VCZ active — count of active vector candle zones above and below current price.
Pivot PP — current pivot point value.
Daily open — current daily open price and direction.
14. How to use
14.1 Initial setup
Select a preset that matches your primary trading style. Adjust the session timezone to match your location or your primary exchange. If you trade an instrument with unreliable volume data, enable the PVSRA override and set it to a correlated liquid instrument. Set the ADR lookback period to your preference — 14 days is a standard starting point. For FVGs, set the width filter to 0.5 or higher to exclude minor gaps.
14.2 Reading the dashboard
The dashboard is the fastest way to orient yourself on a new chart or a new session. Check session, EMA cross direction, EMA 200 position, stoch RSI state, and ADR consumed before anything else. Five seconds to a full picture of where the market stands.
14.3 Reading the chart
Check EMA alignment. When EMA 13, EMA 50, and EMA 200 are stacked in the same direction, the trend is more significant than a single crossover. Divergence between them reflects a transition or competing timeframe pressures.
Check ADR percentage. Below 50% means the day has statistical room to move. Above 80% means the day is near its expected limit and extension moves are less probable.
Look for open FVGs near current price. An unmitigated FVG in the direction of the prevailing trend is a precision reference area where price has historically returned.
Check the psy level. If price is approaching the prior week's high or low, be aware that participant behavior around those references tends to be deliberate.
14.4 Timeframe guide
1 minute to 3 minutes — clean scalper preset, candle coloring set to EMA cross.
5 minutes to 15 minutes — clean scalper or signal focus preset.
30 minutes to 1 hour — full context preset, use ADR and pivot points.
4 hours to daily — full context or minimal preset.
14.5 Tips
PVSRA override — use when your broker's volume data is unreliable, when you trade a CFD or derivative with synthetic volume, or when you want spot market volume for a futures chart.
Master opacity offset — adding 10 to 20 increases overall transparency and dims the chart if it feels cluttered. Subtracting 10 to 20 makes all elements more prominent. This shifts all transparency values simultaneously without changing individual settings. Only active in custom preset.
Not every component needs to be active at once. Most traders will find three to four components provide the context they need for their specific setup.
15. Disclaimer
This indicator is provided for educational and informational purposes only.
Nothing in this document constitutes financial advice or any form of trading recommendation.
Trading financial instruments involves substantial risk of loss.
Past performance is not indicative of future results.
You may lose all of your invested capital.
All trading decisions are made entirely by the user.
Use at your own discretion.
Indicator
Fair Value Gap Zones MTF + Wait CloseFair Value Gap Zones MTF + Wait Close
Fair Value Gap Zones MTF is a market imbalance and liquidity indicator designed to automatically identify and project Fair Value Gap (FVG) zones across customizable timeframes.
Fair Value Gaps represent areas where price moves aggressively enough to leave an imbalance between buyers and sellers, creating regions that may later act as areas of interest for reaction, continuation, retracement, or liquidity interaction.
This indicator allows for multi-timeframe FVG analysis, optional displacement filtering, customizable gap thresholds, and dynamic zone management to provide greater flexibility across different trading styles and market environments.
Features:
• Automatic bullish and bearish Fair Value Gap detection
• Multi-timeframe (MTF) support
• Optional "Wait Until Bar Close" confirmation logic
• Multiple minimum gap sizing methods:
• ATR-based
• Percentage-based
• Fixed points-based
• Optional displacement candle requirement
• Box or line display modes
• Optional FVG midline plotting
• Extend zones into future price action
• Adjustable zone count limits
• Optional automatic deletion when zones become filled
• Fully customizable colors and styles
Alerts Included:
• New Bullish Fair Value Gap
• New Bearish Fair Value Gap
Potential use cases:
• Identify market imbalances
• Locate potential retracement areas
• Monitor liquidity interaction zones
• Add confluence to existing strategies
• Study continuation versus rebalancing behavior
• Analyze higher timeframe market structure
Interpretation:
Bullish Fair Value Gap
Indicates an imbalance created by aggressive upward movement where price may revisit the area before continuing.
Bearish Fair Value Gap
Indicates an imbalance created by aggressive downward movement where price may revisit the area before continuing.
Midline
Displays the midpoint of the imbalance and can act as an additional area of interest.
Displacement Filter
Allows filtering for stronger moves by requiring a larger displacement candle before creating a zone.
This indicator is designed to provide a flexible way to visualize potential market imbalances while allowing traders to adapt the behavior to different instruments and strategies.
About TrendGenY Indicators
TrendGenY indicators are built from market experience, creative concepts, and a constant pursuit of unique perspectives. Rather than following conventional ideas, the focus is on uncovering alternative insights and viewing market behavior through different angles to reveal information that traditional tools may overlook and help traders build a more meaningful edge in the market.
Indicator
Guter FVG IndikatorDieses Pine Script v6 ist ein erweiterter Fair Value Gap Indikator auf Basis des ursprünglichen FVG-Heatmap-Konzepts von Hash Capital Research.
Der Indikator erkennt automatisch Bullish und Bearish Fair Value Gaps, zeichnet diese direkt im Chart ein und verwaltet aktive Zonen inklusive optionaler Mitigation-Logik, Midline, Labels und Dashboard.
Was macht der Indikator?
Der Indikator sucht nach klassischen 3-Kerzen-Fair-Value-Gaps:
Bullish FVG: wenn high < low
Bearish FVG: wenn low > high
Gefundene Zonen werden als Boxen im Chart angezeigt. Optional wird zusätzlich die 50%-Mittellinie der FVG-Zone eingezeichnet.
Wichtige Funktionen
automatische Erkennung von Bullish und Bearish FVGs
ATR-basierter Mindestfilter für Gap-Größe
optionaler Prozentfilter für Mindestgröße des FVGs
einstellbare Mitigation-Regeln:
Full Fill
50% Fill
First Touch
optionale Entfernung gefüllter Zonen
Midline-Anzeige für die 50%-Zone
Labels für neue FVGs und gefüllte Zonen
Dashboard mit Regime-Auswertung
Alerts für neue Bullish/Bearish FVGs
Neue Dashboard-Erweiterung
Zusätzlich zeigt das Dashboard jetzt die nächsten aktiven FVGs zur aktuellen Preisposition an:
Long FVG 1
Long FVG 2
Short FVG 1
Short FVG 2
Dabei werden nur aktive FVG-Zonen berücksichtigt.
Ein Long FVG entspricht einem Bullish FVG.
Ein Short FVG entspricht einem Bearish FVG.
Die Distanz wird immer zur Mittellinie des jeweiligen FVGs berechnet:
distanceToMidPercent = ((zone.midpoint - close) / close) * 100
Für die Sortierung wird die absolute Distanz verwendet. Dadurch werden die nächstgelegenen FVGs unabhängig davon gefunden, ob sie oberhalb oder unterhalb des aktuellen Preises liegen.
Ausschlussregel für sehr nahe FVGs
FVGs, deren Mittellinie bereits sehr nahe am aktuellen Preis liegt, werden nicht mehr im Dashboard angezeigt.
Wenn die Distanz zur Midline kleiner oder gleich 0.2% ist, wird diese Zone ignoriert:
math.abs(distanceToMidPercent) <= 0.2
Das soll verhindern, dass bereits fast erreichte FVGs weiterhin als relevante „nächste“ Ziele angezeigt werden.
Farblogik im Dashboard
Long FVGs werden cyan/grünlich angezeigt
Short FVGs werden rot/pink angezeigt
FVGs nahe am Ausschlussbereich, also unter 0.5%, werden orange angezeigt
Wenn kein passendes FVG vorhanden ist, erscheint n/a
Regime Dashboard
Das Dashboard zeigt außerdem Statistiken zur bisherigen FVG-Füllung:
aktuelles Marktregime
durchschnittliche Fill-Dauer
Median-Fill-Dauer
schnelle Fills
langsame Fills
Sample Size
aktive Zonen
Das Regime basiert auf der Geschwindigkeit, mit der historische FVGs gefüllt wurden. Dadurch kann der Indikator Hinweise geben, ob der Markt eher mean-reverting, trending oder gemischt ist.
Wofür kann der Indikator genutzt werden?
Dieses Tool kann helfen, aktive Fair Value Gaps besser zu verfolgen und potenzielle Zielbereiche im Chart schneller zu erkennen.
Besonders nützlich ist die Anzeige der nächsten Long- und Short-FVGs, da sie direkt zeigt, welche aktiven FVG-Midlines dem aktuellen Preis am nächsten liegen.
Der Indikator ist nicht als eigenständiges Handelssystem gedacht, sondern als visuelles Analysewerkzeug zur Unterstützung bei Marktstruktur, Liquiditätszonen und möglichen Reaktionsbereichen.
Hinweis
Dieses Skript stellt keine Finanzberatung dar. Es dient ausschließlich zu Analyse- und Bildungszwecken. Trading ist mit Risiko verbunden. Nutze den Indikator immer zusammen mit eigener Analyse, Risikomanagement und einem klaren Handelsplan.
Erklärung der Marktregime
Das Dashboard versucht anhand der historischen FVG-Fill-Geschwindigkeit einzuschätzen, in welchem Marktumfeld sich der Chart aktuell eher befindet.
Dabei werden drei Regime unterschieden:
1. CHOPPY / MEAN-REVERT
Dieses Regime erscheint, wenn viele FVGs relativ schnell wieder gefüllt werden.
Das deutet häufig auf einen seitwärts laufenden, unruhigen oder stark zurücklaufenden Markt hin. Preisbewegungen halten in solchen Phasen oft nicht lange an, sondern kehren schnell zu vorherigen Ungleichgewichten zurück.
Möglicher Trading-Ansatz:
eher vorsichtig mit Breakout-Trades sein
FVGs können häufiger als kurzfristige Ziele genutzt werden
Mean-Reversion-Setups können besser funktionieren
Gewinne eher schneller sichern
nicht zu aggressiv auf starke Trendfortsetzung setzen
2. TRENDING / DISPLACEMENT
Dieses Regime erscheint, wenn FVGs langsamer oder seltener gefüllt werden.
Das kann darauf hindeuten, dass der Markt stärker in eine Richtung läuft und Ungleichgewichte länger offen bleiben. In solchen Phasen kann Momentum wichtiger sein als sofortige Rückläufe.
Möglicher Trading-Ansatz:
eher mit dem Trend arbeiten
Pullbacks in Richtung aktiver FVGs beobachten
FVGs können als mögliche Re-Entry- oder Discount/Premium-Zonen dienen
nicht jedes offene FVG sofort als Fill-Ziel behandeln
laufende Trends nicht zu früh gegenhandeln
3. MIXED / TRANSITIONAL
Dieses Regime erscheint, wenn weder schnelle noch langsame Fills klar dominieren.
Der Markt befindet sich dann oft in einer Übergangsphase. Es kann zu Richtungswechseln, wechselnder Volatilität oder unklarer Struktur kommen.
Möglicher Trading-Ansatz:
selektiver handeln
auf zusätzliche Bestätigung warten
kleinere Positionsgrößen oder konservativeres Risiko nutzen
wichtige FVGs mit Marktstruktur, Liquidität und höheren Zeiteinheiten kombinieren
keine zu starke Annahme über Trend oder Mean Reversion treffen
Wichtig
Die Regime-Anzeige ist keine Kauf- oder Verkaufsempfehlung. Sie beschreibt nur, wie sich FVGs in der jüngeren Vergangenheit verhalten haben. Am besten funktioniert sie als Kontextfilter zusammen mit Marktstruktur, Liquidität, Session-Zeiten, Volumen und sauberem Risikomanagement.
Indicator
Delta Imbalance Map [JOAT]Delta Imbalance Map
Introduction
Delta Imbalance Map is an open-source imbalance mapping tool that identifies fair value gaps and scores them using gap size, candle drive, volume rank, and lower-timeframe participation tilt. The goal is to show not only where an imbalance exists, but whether the participation behind it is meaningfully tilted.
The problem this indicator solves is noisy zone plotting. Many imbalance tools mark every three-bar gap with equal importance. Delta Imbalance Map uses permissive defaults so important gaps appear often, then manages overlap so newer or stronger zones replace stale overlapping zones. Each active zone can carry its own compact right-edge data tag with price range, score, participation lead, and gap size in ATR units.
Core Concepts
1. Three-Bar Imbalance Detection
The script detects bullish gaps when the current low is above the high two bars back, and bearish gaps when the current high is below the low two bars back.
bullGap = low > high
bearGap = high < low
2. Lower-Timeframe Participation Split
The script requests lower-timeframe volume, close, and open arrays. Intrabars closing up are counted as buyer participation, intrabars closing down are counted as seller participation, and flat intrabars are split.
3. Composite Zone Score
Each new zone receives a quality score from gap size relative to ATR, lower-timeframe tilt, candle body drive, and volume rank. Optional minimum tilt and volume-rank inputs can tighten the feed when a chart becomes too busy.
4. Overlap Management
If a new zone overlaps an existing zone, filled overlaps are cleared and active overlaps are resolved by score. This keeps a generous stream of zones without stacking many boxes at the same price.
5. Zone Rails and Data Tags
Each imbalance draws a subtle outer glow box, direction-colored gradient edge, green buy-participation section, red sell-participation section, dashed top and bottom price rails, a dotted internal participation split line, and compact labels beside the related zone. Visible labels are capped and staggered to avoid covering the chart.
Features
ATR-filtered imbalance detection: Removes tiny gaps below the selected size threshold
Lower-timeframe delta proxy: Uses intrabar candle direction to estimate buyer/seller participation
Split-zone coloring: Zones are divided into bullish and bearish participation areas
Gradient glow boxes: Outer zone shell shifts from cyan/violet into bull/bear edge colors based on score
Price rail system: Top, bottom, and internal split lines extend to the right edge
Compact capped tags: Active and filled tags are limited and staggered to reduce label overlap
Quality score tags: Each active zone can show price range, score, participation lead, and ATR gap size
Mitigation modes: Touch or full-fill logic
Overlap guard: Keeps the stronger of overlapping zones
Color-faded filled zones: Filled zones remain visible by default with compact zone labels
Candle tilt tinting: Candles can be softly tinted by the active imbalance tilt
Birth-bar mitigation guard: New zones cannot be marked filled on the same candle they are created
Top-right dashboard: Active count, filled count, bull/bear count, average score, tilt, lower timeframe, state, and fill mode
Alerts: New bullish and bearish imbalance creation events
Input Parameters
Detection:
Delta Lower TF: Lower timeframe used for participation split
Min Gap ATR: Minimum gap size relative to ATR
Min Delta Tilt: Minimum buyer/seller skew needed to accept a zone
Min Volume Rank: Minimum volume percentile required for plotting a new zone
Mitigation: Touch or Full Fill
Prefer Stronger Overlap: Removes weaker overlapping zones
Zone Life Bars: Maximum active lifetime for unfilled zones
How to Use This Indicator
Step 1: Look for active zones that remain unfilled.
Step 2: Read the tag score and buyer/seller tilt.
Step 3: Use the top and bottom rails as the exact price boundaries of the imbalance.
Step 4: Use the dashboard state to see if active zones lean buyer-led, seller-led, or balanced.
Step 5: Treat mitigated zones as resolved context rather than fresh trade signals.
Indicator Limitations
Lower-timeframe participation is a candle-direction volume proxy, not true bid/ask delta
Some lower timeframes may not be available on every PulseWire plan or symbol
Fair value gaps can remain open for long periods or fail to react when revisited
Signals and zones are created on confirmed bars to reduce repaint risk
Originality Statement
Delta Imbalance Map is original in its combination of ATR filtering, lower-timeframe participation tilt, composite scoring, overlap prioritization, mitigation lifecycle, and dashboard summarization. It does not copy third-party source code.
Disclaimer
This open-source indicator is for educational and informational use only. It is not financial advice and does not predict that an imbalance will fill or reverse price. Always use proper risk management.
-Made with passion by jackofalltrades
Indicator
IRL ERL Liquidity MapIRL ERL Liquidity Map is an original multi-timeframe orderflow and liquidity mapping tool designed to help traders organize internal liquidity zones and external liquidity objectives on one clean chart.
The script focuses on the relationship between IRL and ERL:
IRL, or Internal Range Liquidity, is represented by imbalance-style zones such as Fair Value Gaps (FVG) and Breakaway Gaps (BAG). These zones mark areas where price may return before continuing toward a larger liquidity objective.
ERL, or External Range Liquidity, is represented by swing highs, swing lows, and previous high/low levels from higher timeframes. These levels act as possible draw-on-liquidity objectives once price reacts from an internal zone.
The purpose of combining these components is not to create separate signals, but to show one complete liquidity workflow:
1. Identify an internal liquidity zone.
2. Watch whether price reacts from it or closes through it.
3. Track the likely external liquidity objective.
4. Use higher-timeframe levels and session ranges for context.
Main Features
Multi-Timeframe IRL Zones:
The indicator tracks FVG and BAG zones across selected timeframes including 15m, 1h, 4h, Daily, Weekly, and Monthly. Each timeframe can be enabled or disabled separately. Bias can be left on Auto or manually filtered to bullish or bearish.
FVG and BAG Detection:
A bullish FVG is detected when the current candle leaves an imbalance above the candle two bars back. A bearish FVG is detected when the current candle leaves an imbalance below the candle two bars back. BAG zones are stricter gap conditions where the displacement candle also breaks beyond the prior candle structure.
Zone Validation:
Zones remain active until price invalidates them by closing through the zone body on the related timeframe, or until the related external liquidity target is reached. This helps separate a simple wick reaction from a stronger body-close invalidation.
ERL Targets:
The script uses swing highs and swing lows as external liquidity targets. When price reacts from an IRL zone, the nearest relevant swing objective helps define where the current context may complete.
Swing Points:
Tiny swing dots and optional ERL swing lines can be displayed on the chart. These are intended to make local liquidity points easier to see without adding heavy visual clutter.
Higher-Timeframe Liquidity Levels:
Previous Day High/Low, Previous Week High/Low, and Previous Month High/Low can be displayed. These levels are commonly used as external liquidity references and can be automatically removed once swept.
Session Killzones:
The script includes configurable session ranges for London, New York, Asia, and Sydney. These ranges help traders study when liquidity runs, reactions, and displacement are occurring during active market windows.
Dashboard:
A compact dashboard summarizes the current orderflow state for each enabled timeframe. It shows whether price is reacting from an IRL zone, whether a zone is failing, or whether no active context is present. The dashboard uses matching timeframe colors for easier reading:
4h = orange
Daily = blue
Weekly = yellow
Monthly = red
Chart Clarity:
The script includes display controls to reduce clutter, including maximum active zones per timeframe, maximum total zones, fixed-width zone boxes, dashed zone borders, label controls, and opacity settings.
How To Use
Use higher timeframes first to identify major liquidity context. For example, Daily, Weekly, or Monthly zones can show larger areas where price may react or rebalance.
Use lower timeframes to refine entries and observe whether price is respecting or failing an internal liquidity zone.
A reacting state means price has entered an active IRL zone without yet invalidating it by body close.
A failing state means price has closed through the IRL zone according to the selected timeframe logic.
An ERL completion means price has reached the related swing or external liquidity objective after the IRL context was active.
This tool does not predict price direction by itself. It is designed as a visual framework for studying liquidity, imbalance, session timing, and higher-timeframe objectives. Traders should combine it with their own risk management, market structure analysis, and confirmation rules.
Recommended Chart Setup
For publication or clean analysis, use this indicator by itself on the chart, with minimal drawings. Keep the chart background clean so the FVG/BAG zones, ERL targets, session ranges, and higher-timeframe levels are easy to identify.
Indicator
AG Pro Fair Value Gap Engine [AGPro Series]AG Pro Fair Value Gap Engine
OVERVIEW / WHAT IT DOES
AG Pro Fair Value Gap Engine is a rules-based overlay built to detect 3-bar fair value gap structures and organize them as a living imbalance map on the chart.
The script identifies bullish fair value gaps when the current low is above the high from two bars earlier, and bearish fair value gaps when the current high is below the low from two bars earlier. Once detected, each zone is stored, rendered, tracked through time, and updated as price interacts with it.
Instead of stopping at basic FVG detection, this script continues to follow the structure after creation. It monitors whether the gap remains active, whether price returns into it, whether mitigation occurs, how old the structure has become, and how strong or weak that mitigation event appears relative to the gap itself.
The result is not just a visual list of imbalances. It is an FVG lifecycle model designed to help traders distinguish between fresh gaps, aging gaps, mitigated gaps, and higher-quality mitigation events.
UNIQUE EDGE
Many fair value gap tools simply highlight every detected gap and leave the user to interpret the rest.
This script is built around a different idea:
not all FVGs deserve the same attention, and not every mitigation event carries the same informational value.
AG Pro Fair Value Gap Engine separates itself by combining detection, aging, prioritization, mitigation tracking, and scoring in a single structured workflow. Gaps are not treated as static rectangles. They are treated as evolving chart objects with a lifecycle.
Within the AG Pro Series, this script is also distinct from breakout-quality, reclaim, rotation, pressure, or acceptance-style overlays. Those models focus on trend behavior, reclaim behavior, structural confirmation, momentum pressure, or price acceptance around a reference. This one is centered on imbalance structure itself: where the 3-bar gap formed, how long it stayed relevant, whether price returned, and how credible that mitigation looked once interaction happened.
In practical terms, the script is designed to answer questions such as:
Which FVGs are still active?
Which ones are becoming stale?
Which mitigation events happened with better quality?
Which visible zones are worth keeping in focus, and which are just legacy context?
That is the core difference. This is not a generic FVG highlighter. It is an imbalance-ranking and mitigation-quality engine.
METHODOLOGY
1) Detection Logic
The script scans for standard 3-bar fair value gap structures.
Bullish FVG:
current low > high from two bars back
Bearish FVG:
current high < low from two bars back
A minimum size filter relative to ATR is applied so that very small gaps can be ignored when desired.
2) Structure Tracking
After detection, each FVG is stored and tracked over time. The script keeps the zone on the chart, extends active zones forward when enabled, and updates their visual state as the market evolves.
This allows the chart to preserve the structural memory of imbalance zones instead of treating every new gap as an isolated event.
3) Aging and Visual Decay
Older gaps gradually lose visual priority through fade logic. This helps newer or more relevant structures stay readable while old zones move into the background.
Optional controls can also suppress distant legacy zones when they become both old and far from current price.
4) Mitigation Logic
The script monitors how deeply price returns into each gap. When the user-defined mitigation threshold is reached, the FVG is marked as mitigated.
Mitigated zones can remain visible as context or be hidden for a cleaner chart, depending on preference.
5) Quality Scoring
Mitigation is not treated as a simple yes/no event. The script evaluates mitigation quality using a weighted model that includes:
- Gap size relative to ATR
- Speed of return into the zone
- Relative volume during the mitigation event
- Return strength after contact with the gap
This produces a normalized score intended to help separate weaker fills from stronger, better-formed mitigation behavior.
6) Focus and Prioritization
To reduce chart noise, the script includes focused labeling, active-zone prioritization, top-zone filtering, and legacy suppression logic.
This means the visual output can be tuned away from “show everything” and toward “show what matters most.”
SIGNALS & ALERTS
This script provides alert conditions for:
- Newly detected bullish fair value gaps
- Newly detected bearish fair value gaps
- Bullish fair value gaps reaching mitigation
- Bearish fair value gaps reaching mitigation
These alerts are event-based and rules-based. They are not forecasts, predictions, or trade instructions.
The labels and panel are designed to summarize state, not to replace the user’s broader market process.
KEY INPUTS
Core Settings
- Minimum FVG Size (ATR)
- Mitigation Threshold (%)
- Maximum Tracked FVG Count
- Age Fade Length
- Extend Active FVG Boxes
Scoring Engine
- Speed Score Reference
- Volume Score SMA Length
- Volume Score Max Ratio
- Size Score Max ATR
Visual Settings
- Show FVG Labels
- Focused Label Mode
- Focused Label Minimum Score
- Active / Mitigated Label Age Limits
- Highlight Score Threshold
- Theme Preset
- Show Mitigated Zones
- Show Mitigated Zone Labels
- Label Horizontal Offset
- Hide Distant Legacy FVGs
- Legacy Hide Age
- Legacy Hide Distance
- Show Only Top Active Zones
- Top Active Zones Count
- Label Stack Spacing
Panel Settings
- Show Panel
- Panel Position
- Panel Font Size
These controls allow the same logic to be used in a more information-dense mode or in a much cleaner presentation mode, depending on the charting style of the user.
LIMITATIONS & TRANSPARENCY
This script detects and organizes 3-bar imbalance structures. It does not claim to identify every meaningful liquidity event, order-flow shift, or broader smart money context factor on its own.
A fair value gap can remain open for a long time, fail quickly, or be revisited multiple times. A high score does not guarantee a directional outcome. A low score does not automatically invalidate the zone as context.
The mitigation score is a structured ranking model, not an objective truth about future price behavior. It is designed to help compare events inside the framework of this script.
Because chart structure, volatility, timeframe, and instrument behavior vary, users should expect different FVG densities and different score distributions across markets.
This tool is best used as a market-organization layer for imbalance analysis, not as a standalone execution system.
RISK DISCLOSURE
AG Pro Fair Value Gap Engine is an analytical charting tool for educational and informational use.
It does not provide financial advice, does not promise outcomes, and should not be interpreted as a standalone buy or sell system. Fair value gaps, mitigation events, and score readings should be evaluated together with market structure, volatility, timeframe context, liquidity conditions, and the user’s own risk framework.
Trading involves risk. Past chart behavior does not guarantee future results.
Indicator
Nexus Structure Detector [JOAT]Nexus Structure Detector
Introduction
The Nexus Structure Detector is an advanced open-source Smart Money Concepts (SMC) indicator that identifies institutional order flow through Order Blocks, Fair Value Gaps, Liquidity Levels, and Market Structure analysis. This indicator combines multiple SMC methodologies into a unified system that reveals where institutions are positioning their orders and how they manipulate price to fill those orders.
Unlike basic support/resistance indicators, the Nexus Structure Detector provides institutional-grade structure analysis through order block detection, FVG identification, liquidity sweep tracking, and premium/discount zone mapping. The indicator is designed for traders who understand that institutions move markets through systematic order placement and liquidity manipulation.
Why This Indicator Exists
This indicator addresses the need for systematic SMC analysis on PulseWire. By combining order blocks, fair value gaps, liquidity levels, and market structure into one tool, it reveals:
Order Blocks: The last candle before a strong move where institutions placed orders
Fair Value Gaps: Imbalances in price where institutions will likely return to fill orders
Liquidity Levels: Pivot highs/lows where retail stops cluster and institutions hunt liquidity
Market Structure: Break of Structure (BOS) and Change of Character (CHOCH) detection
Premium/Discount Zones: Price positioning relative to range equilibrium
Mitigation Tracking: Monitors when order blocks and FVGs are filled
Core Components Explained
1. Order Block Detection
Order blocks are identified by finding the candle with the most extreme price before a strong directional move. The indicator uses pivot detection to identify swing points, then traces back to find the order block candle:
Bullish Order Block: Forms when price breaks above a pivot low - the candle with the lowest low before the breakout becomes the bullish OB
Bearish Order Block: Forms when price breaks below a pivot high - the candle with the highest high before the breakdown becomes the bearish OB
Order blocks are drawn as boxes extending into the future. When price returns to an order block, institutions are likely to defend that zone. Mitigation occurs when price closes through the order block (wick or close mitigation options available).
2. Fair Value Gap (FVG) Detection
FVGs are three-candle patterns where there's a gap between candle 1's high/low and candle 3's low/high:
Bullish FVG: Current low > high from 2 bars ago (gap up)
Bearish FVG: Current high < low from 2 bars ago (gap down)
FVGs represent imbalances where price moved too quickly, leaving unfilled orders. Institutions often return to these zones to fill orders. The indicator tracks FVG mitigation using touch, wick, close, or average methods.
3. Liquidity Level Tracking
Liquidity levels are identified at pivot highs (Buy Side Liquidity - BSL) and pivot lows (Sell Side Liquidity - SSL). These represent areas where retail traders place stop losses:
Buy Side Liquidity (BSL): Above pivot highs where long stop losses cluster
Sell Side Liquidity (SSL): Below pivot lows where short stop losses cluster
Institutions often push price through these levels to trigger stops and fill their orders. The indicator tracks when liquidity is swept (price moves through the level) and displays swept levels with dotted lines.
4. Market Structure Analysis
The indicator tracks market structure by monitoring higher highs/lows and lower highs/lows:
Bullish Structure: Price making higher highs and higher lows
Bearish Structure: Price making lower highs and lower lows
Break of Structure (BOS): When structure continues in the same direction
Change of Character (CHOCH): When structure shifts direction
Market structure helps identify the current trend and potential reversal points. The indicator combines structure with order blocks and liquidity to identify high-probability setups.
5. Premium/Discount Zones
The indicator calculates the range between the highest high and lowest low over a lookback period (default 50 bars), then divides it into zones:
Premium Zone: Above 50% of the range (75-100%) - ideal for shorts
Equilibrium: At 50% of the range - neutral zone
Discount Zone: Below 50% of the range (0-25%) - ideal for longs
Institutions typically buy in discount zones and sell in premium zones. The indicator displays these zones with dotted lines and tracks current price position.
Visual Elements
Order Block Boxes: Solid boxes showing bullish (green) and bearish (red) order blocks with volume labels
Fair Value Gap Boxes: Dashed boxes showing bullish (cyan) and bearish (orange) FVGs
Liquidity Lines: Horizontal lines at pivot highs (BSL - green) and pivot lows (SSL - red)
Premium/Discount Lines: Dotted lines showing range extremes, 75%, equilibrium, and 25% levels
Mitigation Indicators: Faded boxes and dotted lines show mitigated zones
Information Dashboard: Displays market structure, active OBs/FVGs, liquidity levels, price position, and trading bias
How to Use This Indicator
Step 1: Identify Market Structure
Check the dashboard for current market structure (Bullish/Bearish/Neutral). Trade in the direction of structure for highest probability.
Step 2: Locate Order Blocks
Look for unmitigated order blocks in the direction of structure. Bullish OBs in discount zones and bearish OBs in premium zones offer best setups.
Step 3: Monitor Fair Value Gaps
FVGs often get filled before price continues. Use FVGs as entry zones when they align with order blocks and structure.
Step 4: Watch for Liquidity Sweeps
When price sweeps liquidity (BSL or SSL), it often reverses. Look for liquidity sweeps near order blocks for high-probability reversals.
Step 5: Check Price Position
Use premium/discount zones to determine if price is at an extreme. Buy in discount, sell in premium, avoid equilibrium.
Step 6: Combine Elements for Confluence
Best setups occur when multiple elements align: structure + order block + FVG + liquidity sweep + premium/discount zone.
Best Practices
Trade with market structure, not against it
Wait for price to return to order blocks before entering
Use liquidity sweeps as confirmation, not standalone signals
Combine order blocks with FVGs for highest probability entries
Avoid trading in equilibrium zones - wait for premium or discount
Monitor mitigation - once an OB or FVG is mitigated, it's no longer valid
Use higher timeframe structure to confirm lower timeframe setups
Be patient - wait for all elements to align before entering
Input Parameters
Structure Detection:
Swing Length: Pivot detection period (default: 10)
Max Order Blocks: Maximum OBs to display (default: 3)
Max Fair Value Gaps: Maximum FVGs to display (default: 3)
Max Liquidity Levels: Maximum liquidity lines (default: 3)
Mitigation Rules:
OB Mitigation: Wick or Close (default: Close)
FVG Mitigation: Touch, Wick, Close, or Average (default: Close)
Show Mitigated Zones: Toggle mitigated zone display (default: disabled)
Premium/Discount Zones:
Show PD Zones: Toggle zone display (default: enabled)
Lookback Period: Range calculation period (default: 50)
Visual Configuration:
Bullish/Bearish OB Colors: Customizable order block colors
Bullish/Bearish FVG Colors: Customizable FVG colors
Buy/Sell Liquidity Colors: Customizable liquidity line colors
Show Labels: Toggle zone labels (default: enabled)
Show Volume: Toggle volume display on OBs (default: enabled)
Show Dashboard: Toggle information table (default: enabled)
Originality Statement
This indicator is original in its comprehensive SMC integration. While individual concepts (order blocks, FVGs, liquidity) are established SMC principles, this indicator is justified because:
It combines four distinct SMC methodologies into a unified detection system
The automatic order block detection uses swing analysis to identify the exact candle
FVG tracking with multiple mitigation methods provides flexibility
Liquidity sweep detection with volume confirmation adds institutional context
Premium/discount zone integration provides price positioning context
Market structure tracking with BOS/CHOCH detection guides directional bias
The comprehensive dashboard presents all SMC elements simultaneously
Disclaimer
This indicator is provided for educational and informational purposes only. It is not financial advice. Trading involves substantial risk of loss. Smart Money Concepts are analytical tools, not guarantees of future price movement. Order blocks, FVGs, and liquidity levels do not guarantee profitable trades. Always use proper risk management and never risk more than you can afford to lose.
-Made with passion by officialjackofalltrades
Indicator
Orderflow Synthesis Pro [JOAT]Orderflow Synthesis Pro
Introduction
The Orderflow Synthesis Pro is an advanced open-source institutional orderflow analysis indicator that combines Order Block detection, Fair Value Gap identification, Liquidity Pool mapping, and Premium/Discount Array analysis into a unified multi-dimensional flow system. This indicator helps traders identify where institutional money is positioning by analyzing price imbalances, supply/demand zones, and value arrays across the market structure.
Unlike basic support/resistance indicators that simply mark levels, this system dissects orderflow into actionable intelligence: Order Blocks reveal where institutions accumulated or distributed positions, Fair Value Gaps expose price inefficiencies that often get filled, Liquidity Pools identify where stop hunts occur, and Premium/Discount Arrays show whether price is trading at value or extremes. The indicator is designed for traders who understand that institutional footprints can be detected through systematic orderflow analysis.
Why This Indicator Exists
This indicator addresses a critical gap in retail trading: the ability to see institutional orderflow in real-time. Institutional traders leave detectable footprints through their large orders that create specific price patterns. By combining multiple orderflow methodologies, this indicator reveals:
Order Blocks: Last opposing candle before strong directional moves - marks institutional accumulation/distribution zones
Fair Value Gaps: Three-candle price imbalances where price moved too fast, leaving inefficiencies that often get filled
Liquidity Pools: Equal highs and lows where retail stops cluster - prime targets for institutional sweeps
Premium/Discount Arrays: Value zones showing whether price is expensive (premium) or cheap (discount) relative to range
Breaker Blocks: Failed Order Blocks that reverse - signal institutional trap or change in sentiment
Mitigation Blocks: Price returning to Order Blocks for retests - optimal entry opportunities
Each component provides a different lens on institutional behavior. Order Blocks show positioning, Fair Value Gaps show inefficiencies, Liquidity Pools show manipulation targets, and Value Arrays show context. Together, they create a comprehensive view of smart money activity.
Core Components Explained
1. Order Block Detection
Order Blocks represent the last opposing candle before a strong directional move. They mark zones where institutions placed large orders:
// Bullish Order Block: Last bearish candle before strong bullish move
bullishOB = close < open and close > open and
(high - low) > atr * 1.5 and
volume > avgVol * 1.3
The indicator identifies Order Blocks using three criteria:
Candle direction reversal (bearish to bullish or vice versa)
Strong momentum (candle range exceeds ATR threshold)
Volume confirmation (volume exceeds average by multiplier)
Each Order Block displays with a dark box, glowing border, and equilibrium line through the middle (50% level). Strength classification labels blocks as "STRONG" when volume exceeds 1.8x average. Order Blocks remain active until price closes through them (mitigation), at which point they're removed.
2. Fair Value Gap Analysis
Fair Value Gaps (FVGs) occur when price moves so fast that it leaves an imbalance - a gap between three consecutive candles:
// Bullish FVG: Current low > 2 candles ago high
bullishFVG = low > high
fvgSize = (low - high ) / high * 100
FVGs represent price inefficiencies where one side overwhelmed the other. The indicator:
Detects gaps with minimum size threshold (default 0.3%)
Draws semi-transparent boxes marking the imbalance zone
Tracks up to 15 active gaps simultaneously
Auto-removes gaps when price fills them (closes within the zone)
Institutions often return to fill these gaps, making them high-probability reversal or continuation zones depending on context.
3. Liquidity Pool Mapping
Liquidity Pools form at equal highs and lows where retail traders cluster their stop losses. Institutions target these zones to trigger stops before reversing:
The indicator identifies equal highs/lows using pivot detection with tolerance:
Detects swing highs and lows using configurable lookback
Compares pivots to find equal levels within tolerance percentage
Marks zones with thick horizontal lines and labels
Displays "SELL LIQ" above equal highs, "BUY LIQ" below equal lows
When price sweeps these levels and reverses, it signals institutional liquidity grab - often preceding significant moves in the opposite direction.
4. Premium/Discount Arrays
Premium/Discount Arrays classify price position relative to recent range, showing whether price is expensive or cheap:
rangeHigh = ta.highest(high, 50)
rangeLow = ta.lowest(low, 50)
rangeEQ = (rangeHigh + rangeLow) / 2
inPremium = close > rangeEQ and close > (rangeEQ + (rangeHigh - rangeEQ) * 0.5)
inDiscount = close < rangeEQ and close < (rangeEQ - (rangeEQ - rangeLow) * 0.5)
The indicator displays:
Multi-gradient background (red/orange in premium, cyan/green in discount)
Glowing iridescent equilibrium line with pulsing effect
Fibonacci-style levels at 75%, 50%, 25% of range
Dynamic adjustment as range evolves
Institutional traders typically buy in discount zones and sell in premium zones. This provides directional bias for entries.
5. Breaker Blocks
Breaker Blocks occur when an Order Block gets broken and price reverses. They signal failed institutional positioning or traps:
When a bullish Order Block breaks to the downside, it becomes a bearish Breaker Block. When a bearish Order Block breaks to the upside, it becomes a bullish Breaker Block. The indicator marks these with dotted boxes and "BREAKER" labels, showing zones where sentiment shifted.
6. Mitigation Blocks
Mitigation occurs when price returns to an Order Block for a retest. These provide optimal entry opportunities with defined risk:
The indicator marks mitigation with small "MIT" labels when price touches an active Order Block and shows rejection (bullish candle at bullish OB, bearish candle at bearish OB). This confirms the zone is holding and institutions are defending it.
Visual Elements
Order Block Boxes: Dark fill with glowing neon borders (cyan for bullish, magenta for bearish)
Equilibrium Lines: Dashed lines through Order Block midpoints
Fair Value Gap Boxes: Semi-transparent fills (green for bullish, red for bearish)
Liquidity Lines: Thick horizontal lines at equal highs/lows
Premium/Discount Background: Multi-color gradient showing value zones
Equilibrium Glow: Multi-layer iridescent line with pulsing effect
Gradient Candles: Optional candle coloring based on strength and context
Dashboard: Real-time metrics showing active zones and confluence
The dashboard displays 8 key metrics:
1. Confluence Level (Extreme/Strong/Moderate/Weak)
2. Active Order Blocks count
3. Open Imbalance Zones (FVGs)
4. Liquidity Pool count
5. Value Array position (Premium/Discount/Equilibrium)
6. Flow State (Explosive/Active/Dormant)
7. Signal Quality score (0-100)
Input Parameters
Order Block Detection:
Lookback Period: Bars to analyze for OB formation (default: 20)
Volume Multiplier: Threshold for volume confirmation (default: 1.3)
ATR Multiplier: Threshold for momentum confirmation (default: 1.5)
Maximum Active Blocks: Limit displayed OBs (default: 8)
Strength Classification: Enable/disable strength labels
Fair Value Gaps:
Minimum Gap Size: Percentage threshold for FVG detection (default: 0.3%)
Maximum Active Gaps: Limit displayed FVGs (default: 15)
Auto-Fill Detection: Remove gaps when filled
Quality Filter: All/Strong Only/Extreme Only
Liquidity Analysis:
Swing Detection Length: Pivot lookback for equal highs/lows (default: 5)
Level Tolerance: Percentage range for "equal" levels (default: 0.15%)
Show Sweep Markers: Display liquidity grab boxes
Volume Confirmation: Require volume spike for liquidity zones
Premium/Discount Arrays:
Array Lookback Period: Range calculation period (default: 50)
Fibonacci Levels: Show 75%/50%/25% levels
Dynamic Equilibrium: Adjust EQ line in real-time
Advanced Orderflow:
Volume Imbalance: Mark high-volume candles
Breaker Blocks: Show failed Order Blocks
Mitigation Blocks: Mark OB retests
Gradient Candles: Color candles by strength
How to Use This Indicator
Step 1: Identify Value Context
Check the Premium/Discount Array background. Look for entries in discount zones for longs, premium zones for shorts. The equilibrium line shows fair value.
Step 2: Locate Order Blocks
Find active Order Blocks in your direction. Bullish OBs in discount = high-probability long zones. Bearish OBs in premium = high-probability short zones.
Step 3: Watch for Fair Value Gaps
FVGs often get filled. When price approaches an FVG in your direction, prepare for potential retest entry. FVG + Order Block confluence = strongest setups.
Step 4: Monitor Liquidity Pools
Equal highs/lows are magnets for price. Expect sweeps before reversals. When price takes liquidity and shows rejection, it signals institutional positioning complete.
Step 5: Confirm with Mitigation
Wait for price to return to Order Blocks (mitigation). Enter on rejection candles at OB equilibrium lines with stops below/above the block.
Step 6: Check Confluence Score
Dashboard shows confluence level. Extreme/Strong = high-probability setups. Multiple components aligning (OB + FVG + Liquidity + Value Zone) = best entries.
Best Practices
Use on liquid instruments (major forex, large-cap stocks, major crypto) for reliable signals
Combine with higher timeframe bias - trade in direction of HTF structure
Order Blocks work best at key levels - look for OBs near support/resistance
FVG fills don't always happen immediately - be patient
Liquidity sweeps often happen at session opens (London/New York)
Premium/Discount context is critical - don't buy premium or sell discount
Breaker Blocks signal trend changes - respect them
Volume imbalance + Order Block = strongest zones
Multiple mitigation attempts weaken Order Blocks
Indicator Limitations
Orderflow analysis works best on trending markets with clear structure
Choppy, low-volume conditions produce unreliable signals
Order Blocks can fail - always use stop losses
Fair Value Gaps may not fill immediately or at all in strong trends
Liquidity sweeps can extend further than expected (stop hunts)
Premium/Discount zones are relative - not absolute support/resistance
The indicator shows where institutions likely positioned, not guaranteed future direction
Multiple Order Blocks can create conflicting signals - use confluence
Breaker Blocks require confirmation - don't trade the break alone
Technical Implementation
Built with Pine Script v6 using:
Custom Order Block detection with volume and ATR filters
Three-candle Fair Value Gap calculations
Pivot-based liquidity pool identification with tolerance
Dynamic Premium/Discount Array with gradient visualization
Breaker Block detection through OB invalidation tracking
Mitigation Block confirmation with candle pattern recognition
Real-time confluence scoring system
Advanced gradient color schemes with iridescent effects
Comprehensive dashboard with 8 real-time metrics
The code is fully open-source and can be modified to suit individual trading styles and preferences.
Originality Statement
This indicator is original in its comprehensive integration approach. While individual components (Order Blocks, Fair Value Gaps, Liquidity Pools, Premium/Discount) are established ICT concepts, this indicator is justified because:
It synthesizes four distinct orderflow methodologies into a unified system with confluence scoring
The Breaker Block detection provides failed Order Block analysis not available in standard OB indicators
Mitigation Block tracking combines OB retests with candle pattern confirmation for entry precision
The Premium/Discount Array uses multi-gradient visualization with iridescent equilibrium lines
Volume imbalance integration adds confirmation layer to all components
The confluence scoring system quantifies setup quality across all orderflow elements
Real-time dashboard presents 8 metrics simultaneously for holistic orderflow analysis
Each component contributes unique information: Order Blocks show positioning, Fair Value Gaps show inefficiencies, Liquidity Pools show manipulation, Premium/Discount shows context, Breakers show failures, and Mitigation shows retests. The indicator's value lies in presenting these complementary perspectives simultaneously with unified classification and visual hierarchy.
Disclaimer
This indicator is provided for educational and informational purposes only. It is not financial advice or a recommendation to buy or sell any financial instrument. Trading involves substantial risk of loss and is not suitable for all investors.
Orderflow analysis is a tool for understanding market dynamics, not a crystal ball for predicting future price movement. Order Blocks do not guarantee reversals. Fair Value Gaps may not fill. Liquidity sweeps can fail. Past orderflow patterns do not guarantee future orderflow patterns. Market conditions change, and strategies that worked historically may not work in the future.
The zones displayed are analytical constructs based on current market data, not predictions of future price movement. High confluence scores do not guarantee profitable trades. Users must conduct their own analysis and risk assessment before making trading decisions.
Always use proper risk management, including stop losses and position sizing appropriate for your account size and risk tolerance. Never risk more than you can afford to lose. Consider consulting with a qualified financial advisor before making investment decisions.
The author is not responsible for any losses incurred from using this indicator. Users assume full responsibility for all trading decisions made using this tool.
-Made with passion by officialjackofalltrades
Indicator
Multi-TF FVG-TEX.P# Multi-TF FVG All TFs by TEX.P
## Overview
Multi-TF FVG is a powerful Fair Value Gap detector that scans **11 timeframes simultaneously** — from M1 to W1 — all on a single chart. Unlike most FVG indicators that only detect gaps on the chart's current timeframe, this indicator builds higher-timeframe candles internally and scans every timeframe above your chart TF without using a single `request.security()` call. This means **zero repainting**, fast performance, and reliable HTF data.
The indicator is designed for traders who use multi-timeframe confluence to find high-probability trade entries — when multiple timeframes have overlapping FVG zones at the same price level, it signals a strong area of institutional interest.
---
## ⚡ FVG Gate Dashboard
The real-time **FVG Gate** dashboard (top-right) tells you at a glance:
- **BUY**: Shows which bullish FVG zones the current price is sitting inside, with the timeframe names (e.g., `✅ M5+H1+H4(3)`)
- **SELL**: Shows which bearish FVG zones the current price is inside (e.g., `✅ M10+D1(2)`)
- **MITIGATED**: Lists which timeframes had FVGs that have been fully mitigated (closed through) by subsequent price action (e.g., `⚠ M5+M10(2)`)
- **Zones**: Total count of active (unmitigated) FVG zones currently displayed on the chart
This gives you an instant read on multi-timeframe confluence — when BUY shows 3+ timeframes, you're sitting in a strong demand zone. When SELL shows 3+ timeframes, you're in a strong supply zone.
---
## 🎨 FVG Colour Legend
The colour legend panel sits directly below the Gate dashboard, showing all 11 timeframes with their assigned colours. Active timeframes display in UPPERCASE with their colour; disabled ones show in lowercase gray. This helps you instantly identify which timeframe each FVG zone on the chart belongs to.
---
## How It Works
### Zero request.security() Architecture
Instead of calling `request.security()` for each higher timeframe (which introduces repainting and is limited to 40 calls), this indicator uses `timeframe.change()` to detect when a new candle starts on each HTF. It builds and maintains candle arrays (open, high, low, close) for all 10 higher timeframes bar-by-bar as your chart updates. On the last bar, it scans all accumulated candles backward to find FVG patterns.
### FVG Detection Logic
A **Fair Value Gap** is identified using the classic 3-candle pattern:
- **Bullish FVG**: Candle 1's low > Candle 3's high (gap up — price moved so fast that sellers couldn't fill the space between candles 1 and 3)
- **Bearish FVG**: Candle 1's high < Candle 3's low (gap down — price dropped so fast that buyers couldn't fill the space)
The gap zone is the area between these two price levels, centred on Candle 2.
### Strict Mitigation
An FVG is considered **mitigated** (filled) only when a subsequent candle's **close** fully passes through the zone:
- Bullish FVG mitigated when close < bottom of zone
- Bearish FVG mitigated when close > top of zone
Wicks passing through the zone do NOT count — only body closes. Each timeframe's FVG is checked for mitigation using its own timeframe's candle closes, not lower timeframe data. This ensures accurate, timeframe-consistent mitigation tracking.
### Backward Scanning
All scanning happens on `barstate.islast` (the final bar only), which means:
- Minimal CPU usage — no per-bar calculations
- All FVGs within the lookback range are found in one pass
- The chart TF scans using `close ` / `high ` / `low ` references
- Higher TFs scan through their internally-built candle arrays
---
## Timeframes Supported
| Timeframe | Code | Default Colour |
|-----------|------|---------------|
| 1 Minute | M1 | Pink |
| 3 Minute | M3 | Orange |
| 5 Minute | M5 | Green |
| 10 Minute | M10 | Blue |
| 15 Minute | M15 | Purple |
| 30 Minute | M30 | Light Purple |
| 1 Hour | H1 | Cyan |
| 2 Hour | H2 | Peach |
| 4 Hour | H4 | Light Red |
| Daily | D1 | Yellow |
| Weekly | W1 | Light Blue |
The indicator automatically determines which timeframes are "higher" than your chart TF and only scans those. For example, on a 5-minute chart, it will scan M5 (chart TF), M10, M15, M30, H1, H2, H4, D1, and W1 — but skip M1 and M3 since they're lower than the chart TF.
---
## Settings
### Timeframe Toggles
Enable or disable any of the 11 timeframes individually. Disabled timeframes won't be scanned or displayed.
### Display
- **Show Labels**: Toggle the text labels (e.g., "H1 Bull", "M5 Bear") on each FVG zone
- **Show 50% Line**: Toggle the midpoint line inside each FVG box (commonly used as an entry/reaction level)
- **Box extends past last bar**: How far right the FVG boxes extend beyond the last candle (default: 5 bars)
- **Lookback bars**: How many chart bars to scan backward for FVGs (default: 2000, range: 100–5000)
### Colors and Transparency
Each timeframe has its own customisable base colour and transparency level. Higher timeframes default to lower transparency (more visible) since they carry more weight.
### Panels
- **Show Color Legend**: Toggle the FVG Colour Legend panel
- **Show Gate Panel**: Toggle the FVG Gate dashboard
- **Panel Font Size**: Choose from Tiny, Small, Normal, Large, or Huge
- **Gate Buffer pips**: How many pips around an FVG zone still count as "inside" for the Gate dashboard (default: 10)
- **Pip Size**: Pip size for your instrument (default: 0.1 — adjust for forex, crypto, etc.)
---
## How to Use for Trading
### Multi-Timeframe Confluence
The strongest trade setups occur when multiple timeframes have overlapping FVG zones at the same price level. Watch the Gate dashboard:
- **3+ timeframes showing BUY** = Strong demand zone, look for long entries
- **3+ timeframes showing SELL** = Strong supply zone, look for short entries
- **Mixed BUY and SELL** = Contested zone, wait for clarity
### The 50% Line
The midpoint (50% line) of each FVG is a key level where price often reacts. Many institutional traders use it as a precise entry point — entering longs at the 50% of a bullish FVG, or shorts at the 50% of a bearish FVG.
### Mitigation Tracking
The MITIGATED line in the Gate tells you which timeframe FVGs have been filled. If H4 and D1 FVGs are mitigated but M5 is still active, the remaining M5 zone may be weaker since the higher timeframe structure has been invalidated.
---
## Performance Notes
- **Zero `request.security()` calls** — uses `timeframe.change()` for HTF candle building
- **Scans only on the last bar** (`barstate.islast`) — negligible CPU usage during live trading
- **Respects PulseWire limits**: max 500 boxes, 500 labels, 500 lines
- `calc_bars_count` is set to 2000 to match the default lookback
---
## Tips
- On lower timeframes (M1–M5), you'll see many FVG zones. Consider disabling the lowest TFs and focusing on M15+ for cleaner charts
- Increase the Gate Buffer pips for volatile instruments like BTC to catch zones that price is approaching
- The indicator works on any instrument — stocks, forex, crypto, indices, commodities
- Adjust the Pip Size setting to match your instrument (e.g., 0.0001 for forex pairs, 0.01 for stocks, 0.1 for crypto)
- Use the transparency settings to make lower TF zones more transparent so higher TF zones stand out
---
**Built with Pine Script v6. No repainting. No request.security(). Pure multi-timeframe analysis.** Anyone who want MT5 version, I'm selling it for USD100
Indicator
Alpaca-trade
V3S-GodMode Synced Strategy คือเครื่องมือ All-in-One สำหรับเทรดเดอร์สาย ICT / SMC (Smart Money Concepts) ที่ออกแบบมาเพื่อการเทรด Gold (XAUUSD) และ Futures โดยเฉพาะ รวบรวมเครื่องมือวิเคราะห์โครงสร้างราคาและเวลา (Time & Price) ที่สำคัญที่สุดไว้ในหน้าจอเดียว พร้อมระบบ Clean Chart ที่ช่วยให้กราฟไม่รก
🚀 Key Features (ฟีเจอร์หลัก):
1. 🏛️ Market Structure & Trend
Trend Filter: กรองเทรนด์หลักด้วย EMA 200 (ปรับแต่งได้)
VWAP: เส้นค่าเฉลี่ยถ่วงน้ำหนักปริมาณการซื้อขาย
Swing Detection: ระบุจุด Swing High/Low อัตโนมัติ (เลือกดูย้อนหลังหรือดูแค่ปัจจุบันได้)
2. ⏰ Time & Sessions
Session Ranges: กล่องแสดงช่วงเวลา Asia, London, และ New York พร้อมเส้นกึ่งกลาง (Mean Threshold)
Daily Levels: เส้นราคาสำคัญประจำวัน (Previous Day High/Low, True Day Open, New Day Open)
Clean Chart Mode: โหมดพิเศษแสดงผลเฉพาะสัปดาห์ปัจจุบัน ช่วยให้โหลดกราฟไวและไม่รกตาย้อนหลัง
3. 🧠 ICT Concepts & Macros
ICT Macro Tracker: ติดตามช่วงเวลา Macro สำคัญ (เช่น 02:50, 09:50) พร้อมเส้นราคาเปิดของช่วงเวลานั้นๆ
Quarterly Theory: เส้นแบ่งช่วงเวลา 90 นาที (Q1-Q4) และ Micro Cycles (23 นาที)
SMT Divergence: ตรวจจับความขัดแย้งของราคากับสินทรัพย์อ้างอิง (เช่น DXY)
4. 💎 Smart Money & Entry Models
Inversion FVG (IFVG): แสดง Fair Value Gaps ที่ถูกทำลายและเปลี่ยนหน้าที่เป็นแนวรับ/ต้าน (Credit: LuxAlgo logic)
CISD (Change in State of Delivery): ระบบแจ้งเตือนจุดกลับตัวเมื่อเกิดการกวาด Liquidity + FVG + Displacement ในช่วง Killzone
5. 🏆 Gold Special Features
Round Numbers: เส้นแนวรับแนวต้านจิตวิทยา (Psychological Levels) สำหรับทองคำ ปรับระยะห่างได้ (เช่น ทุกๆ $5 หรือ $10)
6. 🛠️ Quality of Life
Dashboard & Watermark: แสดงสถานะและชื่อระบบแบบมืออาชีพ
Customizable: ปรับสี เปิด/ปิด ฟีเจอร์ต่างๆ ได้ตามใจชอบผ่านเมนูตั้งค่า
⚠️ Disclaimer: เครื่องมือนี้มีไว้เพื่อช่วยในการวิเคราะห์ทางเทคนิคเท่านั้น ไม่ใช่คำแนะนำทางการเงิน การลงทุนมีความเสี่ยง ผู้ใช้งานควรศึกษาและบริหารความเสี่ยงด้วยตนเอง
-------------------------------------------------------------
Here is the English Version of the description, ready for you to copy and paste into PulseWire! 😎
📝 V3S-GodMode Synced Strategy
Title: V3S-GodMode Synced Strategy
Description:
V3S-GodMode Synced Strategy is an All-in-One trading toolkit designed specifically for ICT / SMC (Smart Money Concepts) traders focusing on Gold (XAUUSD) and Futures markets. It consolidates the most critical Price Action and Time analysis tools into a single, comprehensive indicator, featuring a "Clean Chart Mode" to keep your workspace uncluttered and professional.
🚀 Key Features:
1. 🏛️ Market Structure & Trend
Trend Filter: Filters the primary market direction using a customizable EMA 200.
VWAP: Displays the Volume Weighted Average Price for intraday analysis.
Swing Detection: Automatically identifies Swing Highs and Swing Lows (Toggle available for historical or current data only).
2. ⏰ Time & Sessions
Session Ranges: Visual boxes for Asia, London, and New York sessions, complete with a Mean Threshold (50%) line.
Daily Levels: critical daily price levels, including Previous Day High/Low (PDH/PDL), True Day Open (TDO), and New Day Open (NDO).
Clean Chart Mode: A unique feature that displays data only for the current week, significantly improving chart loading speed and reducing visual noise from historical data.
3. 🧠 ICT Concepts & Macros
ICT Macro Tracker: Tracks essential Macro windows (e.g., 02:50, 09:50) and plots the opening price line for each specific macro period.
Quarterly Theory: Vertical dividers for 90-minute cycles (Q1-Q4) and Micro Cycles (23-minute intervals).
SMT Divergence: Detects divergences between the asset price and a reference asset (e.g., DXY) to spot potential reversals.
4. 💎 Smart Money & Entry Models
Inversion FVG (IFVG): Highlights Fair Value Gaps that have been invalidated and flipped their role to support or resistance (Credit to LuxAlgo logic).
CISD (Change in State of Delivery): An alert system identifying potential reversal points based on Liquidity Sweeps + FVG + Displacement occurring specifically within Killzones.
5. 🏆 Gold Special Features
Round Numbers: Automatic psychological support and resistance lines for Gold, with adjustable increments (e.g., every $5, $10, or custom values).
6. 🛠️ Quality of Life
Dashboard & Watermark: Displays the system status and indicator name with a professional look.
Fully Customizable: Toggle any feature on or off and customize colors to match your personal trading style via the settings menu.
⚠️ Disclaimer: This tool is intended for technical analysis assistance only and does not constitute financial advice. Trading involves significant risk. Users should conduct their own research and manage their risk accordingly.
Indicator
BISI - SIBI (FVG) + Order Blocks + iFVG Impulsive Candles This indicator highlights three core price-action elements used in imbalance and liquidity-based trading:
Fair Value Gaps (FVG) — BISI / SIBI
• Bullish FVG (BISI): when the current low is above the high from two bars ago (low > high ).
• Bearish FVG (SIBI): when the current high is below the low from two bars ago (high < low ).
Each FVG is drawn as a box with customizable text, color, opacity, and borders.
Order Blocks (OB) — Displacement Logic
• Bullish OB: previous candle is bearish and current close breaks above the previous high (displacement).
• Bearish OB: previous candle is bullish and current close breaks below the previous low.
The Order Block is defined by candle high/low and drawn as a box.
iFVG Candle Coloring (Optional)
Bars are colored when an FVG or strict iFVG condition is detected. This allows quick visual identification of imbalance candles without overcrowding the chart.
AUTO STRETCH & AUTO DELETE — Clean Chart Logic
• Stretch: FVG and OB boxes extend to the right until mitigation.
• Auto-delete: once a zone is considered “filled,” it can be automatically removed to keep charts clean.
Definition of “filled” used in this script:
A zone is considered touched when the candle body (Open/Close range) crosses the box range:
min(open, close) < top AND max(open, close) > bottom.
This is intentionally stricter than wick-based fills to avoid premature invalidations.
KEY SETTINGS
• Lookback Bars — Limits detection range for performance and clarity.
• Max PD Arrays — Controls maximum stored zones to prevent overload.
• Stretch Until Filled — Extends zones dynamically.
• Auto-delete When Filled — Removes mitigated zones.
• Opacity & Borders — Full visual customization.
• Min Penetration (iFVG) — Controls strictness of iFVG qualification.
BEST PRACTICES
• FVGs are commonly used as retracement zones after displacement, especially within HTF structure alignment.
• Order Blocks are most effective when preceded by liquidity sweeps or strong expansion.
• iFVG coloring helps identify impulsive behavior quickly without clutter.
LIMITATIONS
• This is a visual analytical tool, not a standalone entry system.
• Fill logic is based on body penetration (not wick-based).
• Very low timeframes with large lookback settings may impact performance.
Indicator
ICT Entry V2 [TS_Indie]📌 Description – ICT Entry V2
The market structure, liquidity, FVG, and iFVG mechanisms remain the same as in Version 1.
However, the price action for order entries is different, with the positions of the FVG and iFVG swapped.
Pending orders and stop loss are placed at the iFVG.
⚙️ Core Logic & Working Mechanism
I won’t explain FVG in detail, as most traders are already familiar with it.
Let’s focus on the mechanism of iFVG instead.
The concept of iFVG is based on a supply-to-demand flip and a demand-to-supply flip within an FVG zone.
For an iFVG to be confirmed, the candle close must break through the FVG.
A wick alone does not count as a valid iFVG confirmation.
The confirmation of market structure swings uses a pivot length mechanism combined with price action.
It validates a swing by detecting a structure break formed by candles making new highs or new lows.
📈 Buy Setup
1.Liquidity sweep on the demand side, with price closing above the liquidity level.
2.A demand zone is formed as iFVG and FVG, where FVG is located above iFVG.
3.The gap between the upper box of iFVG and the lower box of FVG must be within the defined Min and Max range.
4.Market Structure must be in a Bullish trend.
5.Place a Pending Order at the upper box of iFVG and set Stop Loss at the lower box of iFVG (Entry and Stop Loss can be adjusted using Entry Zone and ATR-based Stop Loss).
📉 Sell Setup
1.Liquidity sweep on the supply side, with price closing below the liquidity level.
2.A supply zone is formed as iFVG and FVG, where FVG is located below iFVG.
3.The gap between the lower box of iFVG and the upper box of FVG must be within the defined Min and Max range.
4.Market Structure must be in a Bearish trend.
5.Place a Pending Order at the lower box of iFVG and set Stop Loss at the upper box of iFVG (Entry and Stop Loss can be adjusted using Entry Zone and ATR-based Stop Loss).
⚙️ Liquidity Sweep Conditions
➯ When a liquidity sweep occurs on the demand side, the system will start looking for Buy Setup conditions.
➯ When a liquidity sweep occurs on the supply side, the system will immediately switch to looking for Sell Setup conditions.
➯ The system will always prioritize the most recent liquidity sweep and search for setups based on that direction.
➯ The liquidity sweep condition will be invalidated when price closes back below (for demand sweep) or above (for supply sweep) the most recently swept liquidity level.
⭐ Pending Order Cancellation Conditions
A Pending Order will be canceled under the following conditions:
1.A new Price Action signal appears on either the Buy or Sell side.
2.When Time Session is enabled, the Pending Order is canceled once price exits the selected session.
🕹 Order Management Rule
When there is an active open position, the indicator restricts the creation of new Pending Orders to prevent overlapping positions.
⚠️ Disclaimer
This indicator is designed for educational and research purposes only. It does not guarantee profits and should not be considered financial advice. Trading in financial markets involves significant risk, including the potential loss of capital.
🥂 Community Sharing
If you find parameter settings that work well or produce strong statistical results, feel free to share them with the community so we can improve and develop this indicator together.
Strategy
Ultimate Futures Daytrade Suite v1 - The Strategy GuideHere is the complete **Strategy Guide** translated into English.
---
# 📘 Ultimate Futures Daytrade Suite – The Strategy Guide
### 1. The Visual Legend (What is what?)
Before you trade, you need to understand the hierarchy of your lines. Not every line has the same importance.
* **🟣 Daily EMA 50 (Neon Violet):** The **"Big Boss"**. It determines the **Macro Trend**.
* *Price above:* We are primarily looking for Longs.
* *Price below:* We are primarily looking for Shorts.
* **🟢 4h EMA 50 (Neon Green):** The **"Swing Trend"**. Your most important level for **Pullback Entries** (Re-entries).
* **🟡 POC (Gold) & TPO:** The **"Magnet"**. Price often returns here.
* *Rule:* Never open a trade directly *on* the POC (Risk of "Chop"). Use it as a **Target** (Take Profit).
* **🟠 IB High/Low (Orange Lines):** The **"Daily Structure"**.
* A breakout from the IB (Initial Balance) often indicates the trend direction for the day.
* **🟥/🟩 Boxes (Supply/Demand):** Resistance and Support zones from the 1h timeframe.
* **⬜ FVG Boxes:** "Gaps" in the market that are often filled.
---
### 2. The Trading Workflow (Top-Down Method)
Go through this mental checklist before every trade:
#### Step 1: Trend Check (The Traffic Light)
Look at the **Violet Line (Daily)** and the **Green Line (4h)**.
* **Bullish:** Price is above Violet AND above Green. -> *Focus: Buy dips.*
* **Bearish:** Price is below Violet AND below Green. -> *Focus: Sell rallies.*
* **Mixed:** Price is between Violet and Green. -> *Caution! Market is undecided (Range Trading).*
#### Step 2: Location (The Context)
Where is the price currently located?
* Are we at a **Green Demand Zone**?
* Are we testing the **4h EMA 50 (Green)** from above?
* Are we at the **VWAP**?
* *Never trade in "No Man's Land"!* Wait until the price touches one of your lines.
#### Step 3: Trigger (The Execution)
Now zoom into your lower timeframe (e.g., 5min or 15min).
* Wait for a reaction at the zone.
* Use the **EMA 9 (Yellow)** as a momentum trigger. If price breaks the EMA 9 and closes above/below it, that is your "Go".
---
### 3. The Setup Blueprints
Here are the two most profitable scenarios you can trade with this script:
#### A) The "Golden Trend" Setup (Long)
* **Context:** Price > **Daily EMA (Violet)**.
* **Preparation:** Price corrects (drops) back to the **4h EMA 50 (Green)** or to the **VWAP**.
* **Confluence:** Ideally, there is also a **Demand Zone (Green Box)** or an **FVG** at that level.
* **Entry:** As soon as a candle touches the zone and closes bullish again (or reclaims the EMA 9).
* **Stop-Loss:** Below the 4h EMA 50.
* **Take-Profit:** Next **Supply Zone (Red)** or the **IB High (Orange)**.
#### B) The "Daytrade Breakout" (Intraday)
* **Context:** Price opens inside yesterday's Value Area.
* **Signal:** Price breaks through the **IB High (Orange)** with momentum.
* **Filter:** Price must be above the **VWAP**.
* **Entry:** On the retest of the IB High or directly on the breakout.
* **Target:** Price often trends in that direction for the rest of the day.
---
### 4. Warning Signals (When NOT to trade)
1. **The "Concrete Ceiling":** If you want to go Long, but the **Violet Daily EMA 50** is running directly above you. This is massive resistance. Better wait until it is broken.
2. **The "POC Dance":** If price is dancing sideways around the **Gold Line (POC)**. This is a "No-Trade Zone". Day traders lose the most money here due to fees and whipsaws.
3. **Overextension:** If price is extremely far away from the **4h EMA 50 (Green)** (Rubber Band Effect). Do not enter in the trend direction here; wait for a pullback to the line.
### Summary
Your chart is now telling you a story:
* **Violet** tells you the Direction.
* **Green** gives you the Entry.
* **Red/Green Boxes** show you the Obstacles.
* **Yellow (EMA 9)** gives you the Timing.
Good luck with the Suite! This is a setup similar to what institutional traders use.
Indicator
ICT Entry V1 [TS_Indie]📌 Description – ICT Entry V1
This trading system is based on price action, combined with FVG, iFVG, and liquidity, and it uses the mechanism from the indicator “Smallest Swing ” to validate swings that become liquidity.
⚙️ Core Logic & Working Mechanism
I won’t explain FVG in detail, as most traders are already familiar with it.
Let’s focus on the mechanism of iFVG instead.
The concept of iFVG is based on a supply-to-demand flip and a demand-to-supply flip within an FVG zone.
For an iFVG to be confirmed, the candle close must break through the FVG.
A wick alone does not count as a valid iFVG confirmation.
The confirmation of market structure swings uses a pivot length mechanism combined with price action.
It validates a swing by detecting a structure break formed by candles making new highs or new lows.
📈 Buy Setup
1.Liquidity sweep on the demand side, with price closing above the liquidity level.
2.A demand zone is formed as FVG and iFVG, where iFVG is located above FVG.
3.The gap between the upper box of FVG and the lower box of iFVG must be within the defined Min and Max range.
4.Market Structure must be in a Bullish trend.
5.Place a Pending Order at the upper box of FVG and set Stop Loss at the lower box of FVG (Entry and Stop Loss can be adjusted using Entry Zone and ATR-based Stop Loss).
📉 Sell Setup
1.Liquidity sweep on the supply side, with price closing below the liquidity level.
2.A supply zone is formed as FVG and iFVG, where iFVG is located below FVG.
3.The gap between the lower box of FVG and the upper box of iFVG must be within the defined Min and Max range.
4.Market Structure must be in a Bearish trend.
5.Place a Pending Order at the lower box of FVG and set Stop Loss at the upper box of FVG (Entry and Stop Loss can be adjusted using Entry Zone and ATR-based Stop Loss).
⚙️ Liquidity Sweep Conditions
➯ When a liquidity sweep occurs on the demand side, the system will start looking for Buy Setup conditions.
➯ When a liquidity sweep occurs on the supply side, the system will immediately switch to looking for Sell Setup conditions.
➯ The system will always prioritize the most recent liquidity sweep and search for setups based on that direction.
➯ The liquidity sweep condition will be invalidated when price closes back below (for demand sweep) or above (for supply sweep) the most recently swept liquidity level.
⭐ Pending Order Cancellation Conditions
A Pending Order will be canceled under the following conditions:
1.A new Price Action signal appears on either the Buy or Sell side.
2.When Time Session is enabled, the Pending Order is canceled once price exits the selected session.
🕹 Order Management Rule
When there is an active open position, the indicator restricts the creation of new Pending Orders to prevent overlapping positions.
⚠️ Disclaimer
This indicator is designed for educational and research purposes only. It does not guarantee profits and should not be considered financial advice. Trading in financial markets involves significant risk, including the potential loss of capital.
🥂 Community Sharing
If you find parameter settings that work well or produce strong statistical results, feel free to share them with the community so we can improve and develop this indicator together.
Strategy
FVG + Fibonacci Strategy FINALLa estrategia más precisa para S&P 500, Cannabis Stocks (CURA, GTBIF) y Forex volátil
✅ 3 Filtros de Alta Confluencia:
Fair Value Gaps (FVG): Detecta gaps >0.5% (75-85% relleno histórico)
Fibonacci 61.8%: Golden Zone automática desde swings
Volume Spike: 1.5x media + vela direccional
Resultados Backtest H1 (2023-2025):
text
Win Rate: 84% (confluencia completa)
Avg R/R: 1:2.8
Drawdown: -5.4%
Trades/mes: 8-12 setups premium
🎯 Señales Automáticas:
🟢 BUY: Triángulo verde + SL/TP en label
🔴 SELL: Triángulo rojo + niveles exactos
📱 Alertas: Entry/SL/TP directo al móvil
Tabla Live Status (Top Right):
FVG activo ✅/❌
Fibo 61.8% cerca ✅/❌
Volumen confirmado ✅/❌
Perfecto para:
📈 S&P 500 H1/D1
🌿 Cannabis stocks volátiles
💱 Forex majors (EURUSD, GBPUSD)
Copia → Pine Editor → Add to Chart → Activa Alertas
Backtest validado en 1000+ trades. Ratio riesgo/recompensa óptimo 1:2+
¡Únete a los traders que operan con EDGE real! 💰
The most accurate strategy for S&P 500, Cannabis Stocks (CURA, GTBIF) & Volatile Forex
✅ 3 High-Confluence Filters:
Fair Value Gaps (FVG): Detects gaps >0.5% (75-85% historical fill rate)
Fibonacci 61.8%: Auto Golden Zone from swings
Volume Spike: 1.5x average + directional candle
H1 Backtest Results (2023-2025):
text
Win Rate: 84% (full confluence)
Avg R/R: 1:2.8
Drawdown: -5.4%
Trades/month: 8-12 premium setups
🎯 Automatic Signals:
🟢 BUY: Green triangle + SL/TP on label
🔴 SELL: Red triangle + exact levels
📱 Alerts: Entry/SL/TP straight to mobile
Live Status Table (Top Right):
FVG active ✅/❌
Fibo 61.8% nearby ✅/❌
Volume confirmed ✅/❌
Perfect for:
📈 S&P 500 H1/D1
🌿 Volatile cannabis stocks
💱 Forex majors (EURUSD, GBPUSD)
Copy → Pine Editor → Add to Chart → Enable Alerts
Backtested on 1000+ trades. Optimal 1:2+ risk/reward ratio
Join traders operating with REAL EDGE! 💰
Indicator
Order Block Volumatic FVG StrategyInspired by: Volumatic Fair Value Gaps —
License: CC BY-NC-SA 4.0 (Creative Commons Attribution–NonCommercial–ShareAlike).
This script is a non-commercial derivative work that credits the original author and keeps the same license.
What this strategy does
This turns BigBeluga’s visual FVG concept into an entry/exit strategy. It scans bullish and bearish FVG boxes, measures how deep price has mitigated into a box (as a percentage), and opens a long/short when your mitigation threshold and filters are satisfied. Risk is managed with a fixed Stop Loss % and a Trailing Stop that activates only after a user-defined profit trigger.
Additions vs. the original indicator
✅ Strategy entries based on % mitigation into FVGs (long/short).
✅ Lower-TF volume split using upticks/downticks; fallback if LTF data is missing (distributes prior bar volume by close’s position in its H–L range) to avoid NaN/0.
✅ Per-FVG total volume filter (min/max) so you can skip weak boxes.
✅ Age filter (min bars since the FVG was created) to avoid fresh/immature boxes.
✅ Bull% / Bear% share filter (the 46%/53% numbers you see inside each FVG).
✅ Optional candle confirmation and cooldown between trades.
✅ Risk management: fixed SL % + Trailing Stop with a profit trigger (doesn’t trail until your trigger is reached).
✅ Pine v6 safety: no unsupported args, no indexof/clamp/when, reverse-index deletes, guards against zero/NaN.
How a trade is decided (logic overview)
Detect FVGs (same rules as the original visual logic).
For each FVG currently intersected by the bar, compute:
Mitigation % (how deep price has entered the box).
Bull%/Bear% split (internal volume share).
Total volume (printed on the box) from LTF aggregation or fallback.
Age (bars) since the box was created.
Apply your filters:
Mitigation ≥ Long/Short threshold.
Volume between your min and max (if enabled).
Age ≥ min bars (if enabled).
Bull% / Bear% within your limits (if enabled).
(Optional) the current candle must be in trade direction (confirm).
If multiple FVGs qualify on the same bar, the strategy uses the most recent one.
Enter long/short (no pyramiding).
Exit with:
Fixed Stop Loss %, and
Trailing Stop that only starts after price reaches your profit trigger %.
Input settings (quick guide)
Mitigation source: close or high/low. Use high/low for intrabar touches; close is stricter.
Mitigation % thresholds: minimal mitigation for Long and Short.
TOTAL Volume filter: skip FVGs with too little/too much total volume (per box).
Bull/Bear share filter: require, e.g., Long only if Bull% ≥ 50; avoid Short when Bull% is high (Short Bull% max).
Age filter (bars): e.g., ≥ 20–30 bars to avoid fresh boxes.
Confirm candle: require candle direction to match the trade.
Cooldown (bars): minimum bars between entries.
Risk:
Stop Loss % (fixed from entry price).
Activate trailing at +% profit (the trigger).
Trailing distance % (the trailing gap once active).
Lower-TF aggregation:
Auto: TF/Divisor → picks 1/3/5m automatically.
Fixed: choose 1/3/5/15m explicitly.
If LTF can’t be fetched, fallback allocates prior bar’s volume by its close position in the bar’s H–L.
Suggested starting presets (you should optimize per market)
Mitigation: 60–80% for both Long/Short.
Bull/Bear share:
Long: Bull% ≥ 50–70, Bear% ≤ 100.
Short: Bull% ≤ 60 (avoid shorting into strong support), Bear% ≥ 0–70 as you prefer.
Age: ≥ 20–30 bars.
Volume: pick a min that filters noise for your symbol/timeframe.
Risk: SL 4–6%, trailing trigger 1–2%, distance 1–2% (crypto example).
Set slippage/fees in Strategy Properties.
Notes, limitations & best practices
Data differences: The LTF split uses request.security_lower_tf. If the exchange/data feed has sparse LTF data, the fallback kicks in (it’s deliberate to avoid NaNs but is a heuristic).
Real-time vs backtest: The current bar can update until close; results on historical bars use closed data. Use “Bar Replay” to understand intrabar effects.
No pyramiding: Only one position at a time. Modify pyramiding in the header if you need scaling.
Assets: For spot/crypto, PulseWire “volume” is exchange volume; in some markets it may be tick volume—interpret filters accordingly.
Risk disclosure: Past performance ≠ future results. Use appropriate position sizing and risk controls; this is not financial advice.
Credits
Visual FVG concept and original implementation: BigBeluga.
This derivative strategy adds entry/exit logic, volume/age/share filters, robust LTF handling, and risk management while preserving the original spirit.
License remains CC BY-NC-SA 4.0 (non-commercial, attribution required, share-alike).
Strategy
ICT FVG & Swing Detector Basic by Trader RiazICT FVG & Swing Detector Basic by Trader Riaz
Unlock Precision Trading with the Ultimate Fair Value Gap (FVG) and Swing Detection Tool!
Developed by Trader Riaz , the ICT FVG and Swing Detector Basic is a powerful Pine Script indicator designed to help traders identify key market structures with ease. Whether you're a day trader, swing trader, or scalper, this indicator provides actionable insights by detecting Bullish and Bearish Fair Value Gaps (FVGs) and Swing Highs/Lows on any timeframe. Perfect for trading forex, stocks, crypto, and more on PulseWire!
Key Features:
1: Bullish and Bearish FVG Detection
- Automatically identifies Bullish FVGs (highlighted in green) and Bearish FVGs (highlighted in red) to spot potential reversal or continuation zones.
- Displays FVGs as shaded boxes with a dashed midline at 70% opacity, making it easy to see the midpoint of the gap for precise entries and exits.
- Labels are placed inside the FVG boxes at the extreme right for clear visibility.
2: Customizable FVG Display
- Control the number of Bullish and Bearish FVGs displayed on the chart with user-defined inputs (fvg_bull_count and fvg_bear_count).
- Toggle the visibility of Bullish and Bearish FVGs with simple checkboxes (show_bull_fvg and show_bear_fvg) to declutter your chart.
3: Swing High and Swing Low Detection
- Detects Swing Highs (blue lines) and Swing Lows (red lines) to identify key market turning points.
- Labels are positioned at the extreme right edge of the lines for better readability and alignment.
- Customize the number of Swing Highs and Lows displayed (swing_high_count and swing_low_count) to focus on the most recent market structures.
4: Fully Customizable Display
- Toggle visibility for Swing Highs and Lows (show_swing_high and show_swing_low) to suit your trading style.
- Adjust the colors of Swing High and Low lines (swing_high_color and swing_low_color) to match your chart preferences.
5: Clean and Efficient Design
- Built with Pine Script v6 for optimal performance on PulseWire.
- Automatically removes older FVGs and Swing points when the user-defined count is exceeded, keeping your chart clean and focused.
- Labels are strategically placed to avoid clutter while providing clear information.
Why Use This Indicator?
Precision Trading: Identify high-probability setups with FVGs and Swing points, commonly used in Smart Money Concepts (SMC) and Institutional Trading strategies.
User-Friendly: Easy-to-use inputs allow traders of all levels to customize the indicator to their needs.
Versatile: Works on any market (Forex, Stocks, Crypto, Commodities) and timeframe (1M, 5M, 1H, 4H, Daily, etc.).
Developed by Trader Riaz: Backed by the expertise of Trader Riaz, a seasoned trader dedicated to creating tools that empower the PulseWire community.
How to Use:
- Add the Custom FVG and Swing Detector to your chart on PulseWire.
- Adjust the input settings to control the number of FVGs and Swing points displayed.
- Toggle visibility for Bullish/Bearish FVGs and Swing Highs/Lows as needed.
- Use the identified FVGs and Swing points to plan your trades, set stop-losses, and target key levels.
Ideal For:
- Traders using Smart Money Concepts (SMC), Price Action, or Market Structure strategies.
- Those looking to identify liquidity grabs, imbalances, and trend reversals.
- Beginners and advanced traders seeking a reliable tool to enhance their technical analysis.
Happy trading!
Indicator
