PulseHub
Get started

Force

Market Force Oscillator Elite ProMarket Force Oscillator Elite Pro is a single-pane oscillator that combines acceleration, volume-weighted force, trend alignment, divergence logic, and multi-method cycle diagnostics. How components work together: - Force engine estimates buy/sell pressure from candle position, relative volume weighting, and optional momentum factor. - Oscillator core combines acceleration with force and normalizes using robust scale logic (stdev with MAD fallback when stdev is unstable). - Dynamic levels compute adaptive OB/OS using ATR percent with timeframe-aware auto calibration and a soft-cap transform. - Trend filter compares LTF and HTF EMA direction before allowing directional signals. - Signal quality gate combines oscillator magnitude, relative volume, and optional alignment weighting. - Divergence module uses confirmed pivots with one-shot/cooldown modes. - Cycle module computes Original Ehlers, Zero-Crossing, Peak-to-Peak, Autocorrelation, and Composite estimates. What is new/original in this version (from current code): - Multi-method cycle detector with Composite mode. - Timeframe-aware ATR auto calibration for dynamic OB/OS behavior. - ATR soft-cap compression to avoid overly wide bands on higher timeframes. - Robust oscillator normalization with MAD fallback when stdev becomes outlier-like. - Oscillator-pane marker anchoring (`location.absolute`) to prevent autoscale distortion from price-anchored shapes. How to Use quickstart 1. Add the script to chart and start with `Preset = Balanced`. 2. Set `Cycle Detector Mode = Composite` for combined cycle diagnostics. 3. Enable `Show Detected Cycle (data window)` to inspect cycle outputs. 4. Enable advanced settings only if you need to tune quality gates, trend filter, and cooldowns. 5. Configure alerts from the 5 built-in alert conditions after threshold tuning.
Indicator
by actemplet
[LeonidasCrypto]Volume Force IndexVolume Force Index (VFI) Overview The Volume Force Index (VFI) is a technical indicator that measures the balance between buying and selling pressure in the market by analyzing volume patterns. It helps traders identify potential trend reversals and confirm trend strength. What It Measures Buying vs. selling volume pressure Market momentum Potential overbought/oversold conditions Volume trend strength How to Read the Indicator Main Components: Main Line (Green/Red) Green: Buying pressure is dominant Red: Selling pressure is dominant The steeper the slope, the stronger the pressure Signal Line (Yellow) Fast EMA that helps identify trend changes Acts as an early warning system for potential reversals Dynamic Bands (Red/Green lines) Adapt to market volatility Help identify extreme conditions Based on actual market volatility rather than fixed levels Signals to Watch Trend Direction: Rising oscillator = Increasing buying pressure Falling oscillator = Increasing selling pressure Signal Line Crossovers: Main line crosses above signal line = Potential bullish signal Main line crosses below signal line = Potential bearish signal Band Touches: Touching upper band = Possible buying exhaustion Touching lower band = Possible selling exhaustion Color Changes: Green to Red = Shift to selling pressure Red to Green = Shift to buying pressure Best Practices When to Use: Trend confirmation Identifying potential reversals Volume analysis Market strength assessment Tips: Use in conjunction with price action Look for divergences with price More reliable on higher timeframes Consider market context Default Settings: MA Period: 14 (volume calculation) Smooth Length: 3 (noise reduction) EMA Period: 4 (signal line) Volatility Period: 20 (band calculation) Volatility Multiplier: 1.5 (band width) Best Markets to Apply Any market with reliable volume data Summary The VFI is a powerful tool that combines volume analysis with trend identification. Its adaptive nature makes it suitable for various market conditions, but it should be used as part of a complete trading strategy, not in isolation.
Indicator
by LeonidasCrypto
Relative Volume Force IndexThis indicator can anticipate the market movements. Its posible because it calculates how much force (volume) it's necessary to move the price up or down. If it's necessary a lot of volume to move the price a little it's a reversion signal, but if a little volume could change the price whit elevate volatility, it's signal of reversion too. The indicator plots red if the market is down, and green if it's up, the size and the color of the bars cand demonstrate the movement relative force. Does it by the configurable averages. Not works well whit poor liquidity.
Indicator
by wbelini
1
Money Flow LineWhat is this? The Money Flow Line (MFL) indicator is at its core a more even-tempered version of the Price-Volume-Trend (PVT). The primary difference is the usage of `hlc3` ((high + low + close) / 3) rather than `close` to use the "typical price" that it critical to the calculation of the Money Flow Index (MFI). Other similar indicators include the Accumulation Distribution Line (ADL) and the On Balance Volume (OBV) indicators. The purpose of all of these indicators is to attempt to measure the strength of the money flow by combining price and volume into a rolling measurement that can be compared over time to look for confirmations and divergences. The indicator also includes an optional averaging (smoothing) line that can be enabled in the display settings. Enabling this smoothing line with a desired period allows for simpler trend comparisons and also allows the user to view how far the line has diverged from the mean. This creates an indicator very similar to Elder's Force Index (EFI), which is also a `close * volume` style indicator. Why is this important? After an extreme movement or volume spike the MFI will "snap back" sharply as that bar eventually exits the set period. This produces a result that is meaningless and skews the indicator away from the market structure. Because of this behavior, range clamping, and the loss of comparative history I prefer to shy away from oscillator style indicators. The Money Flow Line instead gives you all of the history so you may compare and see the broader trend without sharp snaps in history based on an arbitrary period setting. Why is this better? This produces a no-lag indicator that isn't subject to the harsh skewing produced by they Money Flow Index's period calculation. It doesn't lose history like MFI or EFI, is clear about the trend direction, and prefers a "typical price" (averaging the entire range of each bar) rather than whatever happens to be the closing price for a given bar. How can I use it? The indicator is attempting to measure supply and demand in the markets. No indicator is perfect, but we can use all of the information we have available to make our best predictions. There are only 3 pieces of data the market gives us: 1. Price (action) 2. Volume 3. Time The Money Flow Line combines all of these data points into a readable rolling data set that attempts to show subtle balance of power shifts based on changes in volume and "smart money" (or "big money") stepping in and out of the picture. Much like PVT, we look for the same things: - Trend Identification: an up or down trend appears in the MFL - Confirmations: the MFL agrees with price action in direction and magnitude - Divergence: the MFL disagrees with price action, indicating a reversal may be coming soon When applying the smoothing line we can also look for similar things we would with EFI. The primary case would be to look for the MFL to jump very far away from the mean (a high magnitude movement) which indicates that price may be reverting towards the mean soon (a "mean reversion"). On the other hand, it may indicate strength in the current price direction. All of these predictions depend heavily on price action and market structure. Good luck!
Indicator
by jocull
4
CyclesThis is a modified Stochastic indicator. Modifications include: 1. The output is now centered on "0" and the scale is from -50 to +50, so that histograms and columns can be used to plot the output. 2. Added visual trade setup triggers. A trigger to the up side is a cycle high and indicates a "sell signal". A trigger to the down side is a cycle low and indicates a "buy" signal. 3. Added an alert trigger to be used to setup alerts. Selecting "Alert" to be Greater Than (>) Value = 0.00 will trigger an alert if either the buy or sell triggers occur. 4. Added a force indicator output. This indicates the rate of change in "D", or mathematically "dD/dt", as was done in the Power Analyzer indicator. When Force and D are in-phase, the maximum power is achieved. 5. Added "Slow Average Momentum" and "Slow Average Force" as was done in the Power Analyzer indicator. 6. Added an internal MACD and EMA as part of the trade setup trigger equation. There is a new input variable for the EMA length. 7. Added an input variable for the "Trigger Threshold", which ranges from -50 to 50, to be used as a screening filter.
Indicator
by FXEngineering
5
FauxLife EFIModification to Elder's Force Index (EFI) Ability to change calculation from standard EMA to your choice of SMA, EMA, WMA, or HMA. Very interesting results! Adjust lookback from standard/suggested 13 candlesticks Added a color indication to positive or negative force reading Added background color tint for an easier read on dashboard setups Suggested pair with my On Balance Volume with Cross to use as a filter & entry/exit setup. Enter or exit trades when the two indicators switch at the same time or within 1-2 candlesticks of each other.
Indicator
by fauxlife
Linear Momentum and Performance IndicatorsThis a porting to Trading View of the 12 new indicators introduced in IFTA Journal (January Edition) by Akram El Sherbini, MFTA, CFTe, CETA. Indicators are available in "Linear Momentum and Performance Indicators" at page four. IFTA Journal is available below: ifta.org Indicators implemented herein: Linear Force Index: The linear force index LFI measures the force of buyers and sellers during rallies and declines, respectively. It combines two important pieces of market information—the price acceleration and volumes. Pressure Index: The pressure index PRI measures the buying and selling pressure over a certain range within a time interval by moving around its zero line. The index indicates a rise in buying pressure when it crosses above the zero line and a rise in selling pressure when it crosses below the zero line level. The buying and selling force moves the last price during the session to form a range with low and high boundaries. Strength Index Index: The strength index SI is a leading indicator to the pressure index. It measures the ability of buyers to resist sellers and vice versa. SI of today is the ratio of the latest pressure index value to the strain of today. Power Index: It measures the buying and selling power within a time interval by moving around its zero line. Intensity Index: The intensity index II measures the buying and selling intensity within a time interval by moving around its zero line. Dynamic Strength Index: The sole purpose of the dynamic strength index DSI and the integral dynamic strength index IDSI is to lead their intensity indicator peers. Integral Force Index Integral Pressure Index Integral Strength Index Integral Power Index Integral Intensity Index Integral Dynamic Strength Index The following example shows a trade following the signal while several indicators are crossing the zero line: Integral performance indicators have a fewer number of trades than the performance indicators. This result is normal, as the integral indicators are less sensitive than their peers. Moreover, the power, intensity, and dynamic strength are less sensitive than the force, pressure, and strength indicators. The same applies for their integrals. Therefore, the integrals of power, intensity, and dynamic strength indicators are more inclined to be medium-term indicators. As the paper is suggesting "the linear momentum and the new performance indicators should make a significant change in categorizing several indicators in technical analysis." Technical indicators are using biased mathematical implementations. For example Momentum Index is in reality a velocity indicator, Force index a Momentum indicator and so on. From a Physical perspective correct momentum, force, velocity etc. needs to be corrected and re-categorized. The author also gives important insights in how these indicators can be used "simultaneously to identify price turning points and filter irrelevant divergences." "This paper will attempt to adjust the price momentum and force concepts introduced by Welles Wilder and Alexander Elder, respectively. By introducing the concept of linear momentum, new indicators will emerge to dissect the market performance into six main elements: market’s force, pressure, strength, power, intensity, and dynamic strength. This will lead to a deeper insight about market action. The leading performance indicators can be used simultaneously to identify price turning points and filter irrelevant divergences. The linear momentum and the new performance indicators should make a significant change in categorizing several indicators in technical analysis." Suggestions and feedbacks are welcome Hope you enjoy this, CryptoStatistical
Indicator
by CryptoStatistical
4
Linear Momentum and Performance Indicators (IFTA Jan 2019)This a porting to Trading View of the 12 new indicators introduced in IFTA Journal (January Edition) by Akram El Sherbini, MFTA, CFTe, CETA. Indicators are available in "Linear Momentum and Performance Indicators" at page four. IFTA Journal is available below: ifta.org Indicators implemented herein: Linear Force Index: The linear force index LFI measures the force of buyers and sellers during rallies and declines, respectively. It combines two important pieces of market information—the price acceleration and volumes. Pressure Index: The pressure index PRI measures the buying and selling pressure over a certain range within a time interval by moving around its zero line. The index indicates a rise in buying pressure when it crosses above the zero line and a rise in selling pressure when it crosses below the zero line level. The buying and selling force moves the last price during the session to form a range with low and high boundaries. Strength Index Index : The strength index SI is a leading indicator to the pressure index. It measures the ability of buyers to resist sellers and vice versa. SI of today is the ratio of the latest pressure index value to the strain of today. Power Index : It measures the buying and selling power within a time interval by moving around its zero line. Intensity Index : The intensity index II measures the buying and selling intensity within a time interval by moving around its zero line. Dynamic Strength Index : The sole purpose of the dynamic strength index DSI and the integral dynamic strength index IDSI is to lead their intensity indicator peers. Integral Force Index Integral Pressure Index Integral Strength Index Integral Power Index Integral Intensity Index Integral Dynamic Strength Index The following example shows a trade following the signal while several indicators are crossing the zero line: Integral performance indicators have a fewer number of trades than the performance indicators. This result is normal, as the integral indicators are less sensitive than their peers. Moreover, the power, intensity, and dynamic strength are less sensitive than the force, pressure, and strength indicators. The same applies for their integrals. Therefore, the integrals of power, intensity, and dynamic strength indicators are more inclined to be medium-term indicators. As the paper is suggesting "the linear momentum and the new performance indicators should make a significant change in categorizing several indicators in technical analysis." Technical indicators are using biased mathematical implementations. For example Momentum Index is in reality a velocity indicator, Force index a Momentum indicator and so on. From a Physical perspective correct momentum, force, velocity etc. needs to be corrected and re-categorized. The author also gives important insights in how these indicators can be used "simultaneously to identify price turning points and filter irrelevant divergences." "This paper will attempt to adjust the price momentum and force concepts introduced by Welles Wilder and Alexander Elder, respectively. By introducing the concept of linear momentum, new indicators will emerge to dissect the market performance into six main elements: market’s force, pressure, strength, power, intensity, and dynamic strength. This will lead to a deeper insight about market action. The leading performance indicators can be used simultaneously to identify price turning points and filter irrelevant divergences. The linear momentum and the new performance indicators should make a significant change in categorizing several indicators in technical analysis." Suggestions and feedback are welcome Hope you enjoy this, CryptoStatistical
Indicator
by CryptoStatistical
10
CMYK MOVEMENT / FORCE ◊ Introduction Price Movement / Force A script that uses Volume and price movement to indicate Bullish/Bearish momentum, like a hindsight MACD. ◊ Origin This is a part of Project XIAM. ◊ Theoretical Approach Philosophy γ :: consequential ◊ Usage Early Indication of Bullish/Bearish momentum, before price reversal. CLEANSIGNAL can be used as input source, for more reliable results. Currently BTC◊USD ETH◊USD XRP◊USD Are available in my scripts. Otherwise the ticker's volume is used as input. My own indicators will be updated soon, to include source selection in their settings. ◊ Features BULL / BEAR Phase to open orders. ( HINT : combine with RSI ? ) EXIT sweep : to find appropriate exit moments, to close opened orders. Sweep is muffled if Phase continues. Sweep Finalize send final EXIT signal. ◊ Community Wanna share your findings ? or need help resolving a problem ? CMYK :: discord.gg AUTOVIEW :: discordapp.com TRADINGVIEW UNOFFICIAL :: discord.gg
Indicator
by MVPMC
3
BBLathe2: Bollinger Band Lathe w/ Elder's Force Index [sclark39]Welcome to the second version of the BBLathe! This shows Bollinger Bands centered on a horizontal basis, to make it easier to see how volatility is changing and identify squeeze opportunities. By default Bollinger bands are calculated using an exponential moving average and an improved higher precision stdev implementation, but this can be disabled. Version 2 also shows Elder's Force Index as a white histogram, so you can see some volume information to help confirm the power of the bears/bulls. The green/red shadow shows how the Bollinger's basis is changing, and when it is going up there will be a green shadow underneath the basis line (this can be inverted in the settings). There is also price line (yellow) showing the location of the price within the Bollinger Bands. Use this indicator for trades at your own risk, I made this for fun and it is not a trade recommendation. That being said, if you like my work please tip me! ETH: 0xf8E0Ea503B5c833fD4546E7fa2c70EcE42A27C8A Please comment with feedback and requests!
Indicator
by sclark39
12
Hull MACD with Force Index Backcolorswww.pulsewire.com Like many other indicators this tells the past and it will dutifully follow the future price changes whatever they will be. This is an upgrade of the "Hull Moving Average Convergence/Divergence" low lag indicator in my scripts. Added Elder Force Index (background colors) to include effects of Volume. When EFI goes positive the background goes green, when it slopes up (more positive than previous bar) it is darker green. Negative red and slope down darker red. I find it useful in all time frames but I use mostly hour and day. The direction color combined with price action and macd tell whether the volume supports the price movement and the shading (darker green for increasing up volume and darker red for increasing down volume) tells of the degree of support. Since when the EFI is positive and dropping, for example, the price can be dropping with opposite for negative. Dark shading tells where the EFI and possibly the price is headed (at the moment). Light shading says to check more on other indications for likely direction. Changed also the histogram color so it stands out of background and added hlines to make relative volatility and peak height easier to see. Anyway help yourself if any of this code is useful to you, enjoy, happy trading and Keep Smiling!
Indicator
by Tom1trader
9
Cumulative Force, Weighted OBVCumulative Force Indicator. Can also be seen as an OBV indicator that takes the price differences into account. In a regular OBV, a high volume bar can make a huge difference, even if the price went up only 0.01, and it it goes down 0.01 instead, that volume makes the OBV go down big time, even though in both cases hardly anything really happened. cForce is a more realistic view on where the money is flowing. This is my first published script, so feel free to let me know if you see room for improvements.
Indicator
by JeroenHouttuin
4
Real-time market data and financial news In-depth global business and economic analysis Live stock quotes and portfolio tools
Link Terkait
Live stock quotes and portfolio tools
Comprehensive trading education and market insights