TRADLEWARE-DCA
Dollar-Cost Averaging Benchmark
This is a passive reference strategy, not a signal-based trading system. It exists to give an honest, apples-to-apples comparison for active strategies: instead of trying to time entries, it buys a fixed amount of the asset on a regular schedule until a set capital budget is fully deployed.
How it works
Dollar-cost averaging (DCA) means investing a fixed amount of money at regular intervals, regardless of price. Some buys land at high prices, some at low prices, and over time the average purchase price smooths out. There is no attempt to predict direction — the schedule is the whole strategy.
This script buys on either a fixed day of the week (e.g. every Monday) or every fixed number of bars (e.g. every 30 daily bars, roughly monthly), and keeps buying until the total amount invested reaches the strategy's starting capital. After that, no more buys are placed — the same total capital pool as whatever active strategy this is being compared against, with no extra money added along the way.
Entry
A buy is placed each time the schedule fires, as long as the running total invested plus the next buy amount does not exceed the starting capital. If a scheduled buy would push the total over budget, it is skipped, but the schedule keeps advancing rather than getting stuck retrying.
Exit
There is no exit signal in the usual sense — the strategy only ever adds to its position. The full position is closed out once, on the final bar of the chart's history, purely so the backtest can report a final equity figure. This is bookkeeping, not a trading decision.
Parameters
Start Date / End Date: window during which buys are allowed
Use Day of Week Mode: switch between "buy on a specific weekday" and "buy every N bars"
Day of Week: which weekday to buy on, when day-of-week mode is on
Every X Bars: how many bars between buys, when day-of-week mode is off (30 on a daily chart is roughly monthly)
Amount per buy: fixed amount invested at each scheduled buy
The strategy allows up to 500 stacked buy layers to accumulate into a single overall position — that number just needs to be large enough to never run out before the capital budget is spent; it is not a trading parameter to tune.
Costs modelled
0.1% commission per side, 3 ticks slippage, fills at the same bar's close (this benchmark intentionally fills immediately rather than waiting for the next bar's open, since there is no signal timing to protect).
Intended assets and timeframe
Works on any asset or timeframe — the frequency inputs just need to be set to match (e.g. 30 bars on a daily chart for roughly monthly buys, 7 for weekly). For higher-priced assets, check that the per-buy amount converts to at least a fraction PulseWire will actually simulate.
Known limitations
The starting capital, buy amount, and buy frequency together decide how long full deployment actually takes — and depending on the chart's date range, that can run out in either direction. With the default settings (10,000 starting capital, 100 per buy, roughly monthly), full deployment takes 100 buys — about 8 years of monthly investing. Starting from 2018-01-01, that budget is exhausted by roughly mid-2026, so on a chart that runs through mid-2026 or later, this script will have already placed its last scheduled buy weeks or months before the present: it simply holds the fully-invested position afterward and stops buying, exactly as designed by the "never invest more than the starting capital" rule, not because of an error. On a shorter chart window relative to the amount and frequency chosen, the opposite can happen instead — the window ends before the full budget is spent, leaving some capital undeployed. Either way, check the strategy's equity and invested-capital tracking rather than assuming full deployment by the end of the chart. This script also has no risk management of any kind by design: it never sells until the very end, so it carries full exposure to any drawdown the asset experiences. That is the intended comparison point for an active strategy, not a flaw to fix.
Strategy
Ticker Pulse Meter BasicPairs nicely with the Contrarian 100 MA located here:
and the Enhanced Stock Ticker with 50MA vs 200MA located here:
Description
The Ticker Pulse Meter Basic is a dynamic Pine Script v6 indicator designed to provide traders with a visual representation of a stock’s price position relative to its short-term and long-term ranges, enabling clear entry and exit signals for long-only trading strategies. By calculating three normalized metrics—Percent Above Long & Above Short, Percent Above Long & Below Short, and Percent Below Long & Below Short—this indicator offers a unique "pulse" of market sentiment, plotted as stacked area charts in a separate pane. With customizable lookback periods, thresholds, and signal plotting options, it empowers traders to identify optimal entry points and profit-taking levels. The indicator leverages Pine Script’s force_overlay feature to plot signals on either the main price chart or the indicator pane, making it versatile for various trading styles.
Key Features
Pulse Meter Metrics:
Computes three percentages based on short-term (default: 50 bars) and long-term (default: 200 bars) lookback periods:
Percent Above Long & Above Short: Measures price strength when above both short and long ranges (green area).
Percent Above Long & Below Short: Indicates mixed momentum (orange area).
Percent Below Long & Below Short: Signals weakness when below both ranges (red area).
Flexible Signal Plotting:
Toggle between plotting entry (blue dots) and exit (white dots) signals on the main price chart (location.abovebar/belowbar) or in the indicator pane (location.top/bottom) using the Plot Signals on Main Chart option.
Entry/Exit Logic:
Long Entry: Triggered when Percent Above Long & Above Short crosses above the high threshold (default: 20%) and Percent Below Long & Below Short is below the low threshold (default: 40%).
Long Exit: Triggered when Percent Above Long & Above Short crosses above the profit-taking level (default: 95%).
Visual Enhancements:
Plots stacked area charts with semi-transparent colors (green, orange, red) for intuitive trend analysis.
Displays threshold lines for entry (high/low) and profit-taking levels.
Includes a ticker and timeframe table in the top-right corner for quick reference.
Alert Conditions: Supports alerts for long entry and exit signals, integrable with PulseWire’s alert system for automated trading.
Technical Innovation: Combines normalized price metrics with Pine Script v6’s force_overlay for seamless signal integration on the price chart or indicator pane.
Technical Details
Calculation Logic:
Uses confirmed bars (barstate.isconfirmed) to calculate metrics, ensuring reliability.
Short-term percentage: (close - lowest(low, lookback_short)) / (highest(high, lookback_short) - lowest(low, lookback_short)).
Long-term percentage: (close - lowest(low, lookback_long)) / (highest(high, lookback_long) - lowest(low, lookback_long)).
Derived metrics:
pct_above_long_above_short = (pct_above_long * pct_above_short) * 100.
pct_above_long_below_short = (pct_above_long * (1 - pct_above_short)) * 100.
pct_below_long_below_short = ((1 - pct_above_long) * (1 - pct_above_short)) * 100.
Signal Plotting:
Entry signals (long_entry) use ta.crossover to detect when pct_above_long_above_short crosses above entryThresholdhigh and pct_below_long_below_short is below entryThresholdlow.
Exit signals (long_exit) use ta.crossover for pct_above_long_above_short crossing above profitTake.
Signals are plotted as tiny circles with force_overlay=true for main chart or standard plotting for the indicator pane.
Performance Considerations: Optimized for efficiency by calculating metrics only on confirmed bars and using lightweight plotting functions.
How to Use
Add to Chart:
Copy the script into PulseWire’s Pine Editor and apply it to your chart.
Configure Settings:
Short Lookback Period: Adjust the short-term lookback (default: 50 bars) for sensitivity.
Long Lookback Period: Set the long-term lookback (default: 200 bars) for broader context.
Entry Thresholds: Modify high (default: 20%) and low (default: 40%) thresholds for entry conditions.
Profit Take Level: Set the exit threshold (default: 95%) for profit-taking.
Plot Signals on Main Chart: Check to display signals on the price chart; uncheck for the indicator pane.
Interpret Signals:
Long Entry: Blue dots indicate a strong bullish setup when price is high relative to both lookback ranges and weakness is low.
Long Exit: White dots signal profit-taking when strength reaches overbought levels.
Use the stacked area charts to assess trend strength and momentum.
Set Alerts:
Create alerts for Long Entry and Long Exit conditions using PulseWire’s alert system.
Customize Visuals:
Adjust colors and thresholds via PulseWire’s settings for better visibility.
The ticker table displays the symbol and timeframe in the top-right corner.
Example Use Cases
Swing Trading: Use entry signals to capture short-term bullish moves within a broader uptrend, exiting at profit-taking levels.
Trend Confirmation: Monitor the green area (Percent Above Long & Above Short) for sustained bullish momentum.
Market Sentiment Analysis: Use the stacked areas to gauge bullish vs. bearish sentiment across timeframes.
Notes
Testing: Backtest the indicator on your chosen market and timeframe to validate its effectiveness.
Compatibility: Built for Pine Script v6 and tested on PulseWire as of June 20, 2025.
Limitations: Signals are long-only; adapt the script for short strategies if needed.
Enhancements: Consider adding a histogram for the difference between metrics or additional thresholds for nuanced trading.
Acknowledgments
Inspired by public Pine Script examples and designed to simplify complex market dynamics into a clear, actionable tool. For licensing or support, contact Chuck Schultz (@chuckaschultz) on PulseWire. Share feedback in the comments, and happy trading!
Indicator
Dollar Cost Averaging (YavuzAkbay)The Dollar Cost Averaging (DCA) indicator is designed to support long-term investors following a Dollar Cost Averaging strategy. The core aim of this tool is to provide insights into overbought and oversold levels, assisting investors in managing buy and sell decisions with a clear visual cue system. Specifically developed for use in trending or fluctuating markets, this indicator leverages support and resistance levels to give structure to investors' buying strategies. Here’s a detailed breakdown of the indicator’s key features and intended usage:
Key Features and Color Coding
Overbought/Oversold Detection:
The indicator shades candles from light green to dark green when an asset becomes increasingly overbought. Dark green signals indicate a peak, where the asset is overbought, suggesting a potential opportunity to take partial profits.
Conversely, candles turn from light red to dark red when the market is oversold. Dark red signifies a heavily oversold condition, marking an ideal buying window for initiating or adding to a position. This color scheme provides a quick visual reference for investors to manage entries and exits effectively.
Support and Resistance Levels:
To address the risk of assets falling further after an overbought signal, the DCA indicator dynamically calculates support and resistance levels. These levels guide investors on key price areas to watch for potential price reversals, allowing them to make more informed buying or selling decisions.
Support levels help investors assess whether they should divide their capital across multiple buy orders, starting at the current oversold zone and extending to anticipated support zones for maximum flexibility.
Usage Methodology
This indicator is intended for Dollar Cost Averaging, a method where investors gradually add to their position rather than entering all at once. Here’s how it complements the DCA approach:
Buy at Oversold Levels: When the indicator shows a dark red candle, it signals that the asset is oversold, marking an optimal entry point. The presence of support levels can help investors determine if they should fully invest their intended amount or stagger buys at potential lower levels.
Sell at Overbought Levels: When the indicator transitions to dark green, it suggests that the asset is overbought. This is an ideal time to consider selling a portion of holdings to realize gains. The resistance levels, marked by the indicator, offer guidance on where the price may encounter selling pressure, aiding investors in planning partial exits.
Customizable Settings
The DCA indicator offers several user-adjustable parameters:
Pivot Frequency and Source: Define the pivot point frequency and the source (candle wick or body) for more tailored support/resistance detection.
Maximum Pivot Points: Set the maximum number of pivot points to be used in support/resistance calculations, providing flexibility in adapting to different market structures.
Channel Width and Line Width: Adjust the width of the channel for support/resistance levels and the thickness of the lines for easier visual tracking.
Color Intensities for Overbought/Oversold Levels: Customize the shading intensity for each overbought and oversold level to align with your trading preferences.
Indicator
