Trend Entry Verifier [AITD]🎯 Trend Entry Verifier — Lock On Before You Pull The Trigger
Stop pulling the trigger when the target isn't locked.
Most traders fire on partial intel — a trendline here, an RSI hint there — and wonder why their stops keep getting hit. Trend Entry Verifier runs a 3-stage clearance check on every bar. No clearance, no shot. When all three lights turn green, you move with confidence.
🛡️ The 3-Stage Clearance Check:
Trend (HMA 13/34) — fast Hull moving averages confirm the field of engagement
Momentum (RSI) — pressure check; RSI above 50 = bulls advancing, below 50 = bears advancing
Strength (ADX + DMI) — power check; ADX above 22 means the move has real force, DI+/DI- confirms who's actually winning
✅ GO only fires when all three clear. Anything less = NO-GO. Stand down. The market has to prove itself before you risk capital.
💔 The Pain This Eliminates:
You know the feeling. You see a "clean" move, jump in, and the market immediately turns into a chop-fest that eats your stop. Or worse — the trend you trusted was actually weak, and you're holding a bag while everyone else exits.
Most losing trades aren't direction errors. They're timing errors — entering when the field hasn't been cleared. TEV refuses to let you fire on weak intel.
🎯 The Confidence This Builds:
When the ribbon flashes bright and the table says GO, you know three independent systems agreed. Not a guess. Not a gut feel. A verified clearance. You enter with conviction, hold with discipline, and exit when the system tells you the field has changed.
🪖 Mission Brief — How To Use It:
🟢 GO + BULLISH → field is clear; favor pullback entries or continuation breakouts
🔴 GO + BEARISH → field is clear; favor rejection entries or breakdown setups
⚫ NO-GO → conditions mixed, weak, or in transition; stand down or scale back
⚪ MIXED trend → trend and momentum disagree; do NOT engage, wait for alignment
🚨 The Visual Ribbon — Your Threat Indicator:
The ribbon at zero shows direction at a glance. When GO conditions clear, the ribbon brightens and thickens — your weapon is hot. When NO-GO, it dims back down. No squinting. No second-guessing. Bright = engage. Dim = stand down.
⚠️ Bonus Threat Markers:
🟧 Orange "R" triangles — RSI hit an extreme (above 70 or below 30); enemy is overextended, don't chase
🟧 Orange "B" triangles — price pierced a Bollinger Band; exhaustion zone, watch for reversal
These flag overextension so you don't engage a stretched target. Why This Hits Different:
🎯 No mystery readings — every state has a clear name and a clear job
🛡️ Conservative by design — NO-GO is the default; you earn the GO
🧹 Single-pane simplicity — one ribbon, one table, one decision per bar
📚 Educational by nature — the table teaches you what to look for, not just what to do
🚫 Built For Traders Who Are Tired Of:
Entering on "looks like a trend" only to get ambushed
Stacking 4 indicators to confirm what one should
Tools that fire during obvious chop
Indicators that look pretty but never tell you when to stay out
One ribbon. One table. One decision. Lock on or stand down.
Defaults: HMA 13/34, RSI 14, DMI 14/14, ADX minimum 22 — fully customizable.
Pairs well with VWRSI Crossovers & Extremes — TEV clears the field. VWRSI calls the shot. Use them together for a full recon → engage workflow.
🎯 Built by The AI Trading Desk. Indicator
AG Pro DMI Rotation Pressure [AGPro Series]AG Pro DMI Rotation Pressure
Overview / What it does
AG Pro DMI Rotation Pressure is designed to track directional leadership shifts between +DI and -DI rather than treating DMI as a simple trend-strength confirmation tool. The script focuses on which side is gaining control, how decisively that control is expanding, and whether the current condition reflects rotation, compression, drift, or established directional pressure.
The indicator is plotted in a separate pane so the rotational structure can be read clearly without interfering with price structure on the main chart. It combines a net pressure histogram, a pressure signal line, DI spread behavior, rotation bursts, and compression tension into one framework intended to make directional handoffs easier to interpret.
This script is intentionally different from strength-oriented DMI or ADX studies. In many DMI-based tools, ADX becomes the main story. Here, ADX is only a supporting context value. The primary objective is to monitor the push-and-pull between +DI and -DI, especially when leadership is unstable, when pressure begins to build after compression, or when one side starts to hold directional control more consistently.
For traders who want to study internal directional pressure before or during trend development, this script is built to highlight control transitions rather than just reporting whether a trend is already strong.
Unique Edge
The distinctive feature of this script is its emphasis on rotational pressure instead of trend-strength ranking. Rather than asking only whether the market is strong, it asks which side is taking control, whether that control is improving or fading, and whether a transition is underway.
This produces a different read from a standard ADX workflow. A market can have moderate ADX and still show meaningful bullish or bearish pressure transfer through the behavior of +DI and -DI. Conversely, a market may print elevated ADX while the directional leadership structure is already weakening or becoming unstable. By separating directional leadership from raw strength, the script aims to expose the internal character of the move more clearly.
The script also classifies the environment into readable states such as Bull Rotation, Bear Rotation, Bull Control, Bear Control, Bull Expansion, Bear Expansion, Bull Drift, Bear Drift, and Compression Battle. That state engine is meant to reduce ambiguity and make the pane easier to interpret quickly across multiple symbols and timeframes.
Methodology
The script begins with the DMI framework: +DI, -DI, and ADX. From there, it derives a rotational model built around DI spread and spread behavior over time.
1. DI leadership
The core directional read is the spread between +DI and -DI. Positive spread means bullish directional leadership. Negative spread means bearish directional leadership. The magnitude of that spread is used as one layer of directional pressure assessment.
2. Rotational slope behavior
The script evaluates how +DI and -DI are changing, not only their absolute values. This helps estimate whether one side is accelerating relative to the other. Slope behavior is important because leadership transitions often begin before a large DI spread is fully established.
3. Pressure scoring
Bullish and bearish pressure are scored separately using DI spread, relative slope behavior, and spread momentum. This creates the Bull / Bear pressure readings shown in the panel, as well as the Net Pressure histogram in the pane.
4. Signal smoothing
A pressure signal line is applied to the net pressure series to make pressure drift and bias easier to read. This is not intended as a prediction line. It is a smoothing layer that helps frame whether the dominant side is strengthening, fading, or remaining relatively stable.
5. Rotation bursts
Crossovers between +DI and -DI are treated as potential rotational events. The script scores those events so that rotation markers are tied to directional handoff rather than appearing as purely cosmetic crossover labels.
6. Compression and tension
When DI spread contracts below the compression threshold, the script evaluates internal tension. This is useful because some of the most meaningful directional expansions begin after a compressed and contested leadership state. Compression Battle is meant to identify that contested environment, not to forecast direction by itself.
7. State engine
The script assigns a readable state based on pressure, spread, crossover status, and compression context. This is what allows the study to describe the environment as rotation, control, expansion, drift, or compression instead of leaving the user to infer all conditions from raw lines alone.
Signals & Alerts
The script includes deterministic alert conditions for the following events:
Bull Rotation
Triggered when +DI crosses above -DI and bullish directional rotation takes control.
Bear Rotation
Triggered when +DI crosses below -DI and bearish directional rotation takes control.
Bull Control
Triggered when bullish pressure is in control territory.
Bear Control
Triggered when bearish pressure is in control territory.
Compression Battle
Triggered when DI spread is compressed while internal tension is elevated.
These conditions are designed to describe state changes inside the DMI structure. They should be used as analytical events, not as automatic trade instructions.
Key Inputs
DI Length
Controls the base DMI sensitivity.
ADX Smoothing
Adjusts the ADX smoothing component used for contextual strength reading.
Rotation Slope Smoothing
Changes how quickly slope-based rotational behavior reacts.
Pressure Signal Length
Controls smoothing of the net pressure signal.
Compression Threshold
Defines when DI spread is considered compressed.
Expansion Threshold
Defines when directional pressure begins to qualify as expansion.
Control Threshold
Defines when directional pressure is strong enough to be treated as control.
Visual controls
Backgrounds, spread fill, rotation markers, panel theme, panel position, and panel font size can all be adjusted depending on the chart style and workspace preference.
Limitations & Transparency
This script is not a forecasting model. It does not know future direction and it does not attempt to predict exact reversal points. It is a structural pressure tool built from DMI behavior.
Like all DMI-based studies, it can become noisy in highly erratic or mean-reverting conditions. Repeated +DI and -DI handoffs may appear during choppy phases, especially on lower timeframes or during indecisive sessions.
Compression readings should not be interpreted as guaranteed breakout setups. Compression only describes a tight directional contest inside the DI structure. Direction still needs confirmation from price behavior, market structure, volatility regime, or other contextual tools.
Bullish or bearish control states do not guarantee continuation. They only indicate that the directional pressure model currently favors one side. Users should evaluate the output alongside price structure, support/resistance, volume behavior, and timeframe context.
This study is best treated as a directional pressure map, not as a standalone trading system.
Risk Disclosure
This script is for chart analysis and research purposes only. It does not provide financial, investment, or trading advice. Markets involve risk, and indicator-based decisions can result in losses. Always use independent judgment, confirm with broader market context, and apply appropriate risk management.
Indicator
Trend Quality Score (TQS)Trend Quality Score (TQS) is a composite indicator designed to evaluate the strength, direction, and consistency of a trend in a single normalized signal.
The indicator combines three core components derived from price action and directional movement:
Directional Strength – Measures the relative dominance of buyers vs. sellers using the difference between +DI and -DI.
Trend Strength (DX) – Captures the magnitude of directional movement, smoothed to reduce noise.
Trend Persistence – Evaluates how consistently price has been moving in one direction over a defined lookback period.
These components are weighted and combined into a single score (TQS), which fluctuates around zero:
Positive values indicate upward trend conditions
Negative values indicate downward trend conditions
Values near zero suggest weak or non-trending markets
A configurable moving average can be applied to TQS to help identify shifts in trend quality and improve signal clarity.
Key Features
Combines strength, direction, and persistence into one metric
Helps distinguish strong trends from choppy conditions
Customizable smoothing and moving average type (SMA, EMA, WMA, RMA)
Suitable for trend confirmation, filtering trades, or regime detection
How to Use
Use TQS above zero to confirm bullish conditions and below zero for bearish conditions
Look for crossovers between TQS and its moving average as potential shifts in trend quality
Avoid trading when TQS is near zero, as this indicates low-quality or sideways markets
This indicator is designed as a confirmation and filtering tool and works best when combined with a broader trading strategy. Indicator
TrendIndicatorsLibrary "TrendIndicators"
This is a library of 'Trend Indicators'.
It aims to facilitate the grouping of this category of indicators, and also offer the customized supply of
the source, not being restricted to just the closing price.
Indicators (this is a work in progress):
1. Absolute DI (Directional Moviment Index) (Difference between DI+ and DI-).
Used in 'DMI Stochastic Extreme' by Barbara Star.
2. DMI
DI_Abs(lengthDI, smoothDI, typeMA, lengthMA)
@description Absolute DI (Directional Moviment Index).
Used in 'DMI Stochastic Extreme' by Barbara Star.
Difference between DI+ and DI-
Parameters:
lengthDI : (int) Length of DI+/DI-
smoothDI : (bool) Sets whether absolute DI should be smoothed
typeMA : (int) Type of moving average of smoothing
lengthMA : (int) Length for moving average of smoothing
Returns: (float) Absolute value of DI
dmi(diLength, adxSmoothing)
@description DMI (Directional Movement Index)
Same as ta.dmi()
Parameters:
diLength : (int) Length of DI+/DI-
adxSmoothing : (int) ADX Smoothing
Returns: Tuple of three DMI series: Positive Directional
Movement (+DI), Negative Directional Movement (-DI) and Average Directional Movement Index (ADX).
dmi(source, diLength, adxSmoothing)
@description DMI (Directional Movement Index)
Customized version of ta.dmi(), with custom source
Parameters:
source : (float) Source for DI+/DI-
diLength : (int) Length of DI+/DI-
adxSmoothing : (int) ADX Smoothing
Returns: Tuple of three DMI series: Positive Directional
Movement (+DI), Negative Directional Movement (-DI) and Average Directional Movement Index (ADX). Library
Indicator
Directional Index Macro IndicatorWhat is This For?
The default settings for this indicator are for BINANCE:BTCUSDT and intended to be used on the 3D timeframe to identify market trends. This indicator does a great job identifying whether the market is bullish, bearish, or consolidating. This can also work well on lower time frames to help identify when a trend is strong or when it's reversing.
Directional Index Rate of Change
Core to this indicator is the rate at which DI+ and DI- are moving away or towards each other. This is called The Rate of Change (ROC). "The ROC length dictates how many bars back you want to compare to the current bar to see how much it has changed. It is calculated like this:
(source - source /source ) * 100"
The rate of change is smoothed using an EMA. A shorter EMA length will cause the ROC to flip back and forth between positive and negative while a larger EMA length will cause the ROC to change less often. Since the rate of change is used to indicate periods of 'consolidation', you want to find a setting that doesn't flip back and forth too often. Between the DI+ and DI- is a blue centerline. Offset from this centerline is a channel that is used to filter out false crosses of the DI+ and DI-. Sometimes, the DI+ and DI- lines will come together in this channel and cross momentarily before resuming the direction prior to the cross. When this happens, you don't want to flip your bias too soon. The wider the channel, the later the indicator will signal a DI reversal. A narrower channel will call it sooner but risks being more choppy and indicating a false cross.
Indicator Status Line
This indicator has 4 values in the status line (in order):
DI+
DI-
Distance between DI+ and DI-
DI Rate of Change ( how quickly are DI+ and DI- moving away or towards center )
Indicator Plots
This indicator plots DI+ (green), DI- (red), and a center channel between DI- and DI+. Across the top of the indicator, red and green triangles indicate the market trend while the background changes to show whether the price is in an impulse wave or consolidating. This makes up 4 possible scenarios:
Bullish impulse wave ( green triangle up + green background )
Bullish consolidation ( green triangle up + yellow background )
Bearish impulse wave ( red triangle down + red background )
Bearish consolidation ( red triangle down + yellow background )
Summary
Combined with support and resistance levels, volume, and your other favorite indicators, this can be a useful tool for validating that your entries are not going against the trend.
Disclaimer
This is not financial advice. Do not take trades only based on the DI+ and DI- crossing. Always use multiple indicators to validate your entries and never take a trade when you aren’t emotionally grounded. Have a plan. Stick to the plan.
The screenshot for this strategy is of a manual historical review of BTC on the 3 day chart. The indicator was built to try and mimic the chart above. You’ll see that it nails it sometimes, is a little late sometimes, and chops around between consolidation and impulse waves when it should stay in consolidation. Share your settings if you are able to improve the choppiness without sacrificing catching the reversals early. Indicator
adx: Configurable ADX (library) Library "adx"
Calculate ADX (and its constituent parts +DI, -DI, ATR),
using different moving averages and periods.
adx(atrMA, diMA, adxMA, atrLen, diLen, adxLen, h, l, c)
Parameters:
atrMA : Moving Average used for calculating the Average True Range.
Traditionally RMA, but using SMA here and in adxMA gives good results too.
diMA : Moving Average used for calculating the Directional Index.
Traditionally, RMA.
adxMA : Moving Average used for calculating the Average Directional
Index. Traditionally RMA, but using SMA here and in atrMA gives good results
too.
atrLen : Length of the Average True Range.
diLen : Length of the Directional Index.
adxLen : Length (smoothing) of the Average Directional Index.
h : Candle's high.
l : Candle's low.
c : Candle's close.
Returns: Library
Average Directional Index + ΔDI± (Delta)Average Directional Index (ADX) and Difference between DI+ and DI- (ΔDI±), I call it Delta for short.
The idea explained:
ADX is a common indicator for analysing trend strength. Values over 25 usually indicate the symbol is in "trend mode", meaning there is a lot of momentum, upwards or downwards, - while values under 25 suggest it is in "range mode", the price moves sideways, lacking energy. Note that this indicator is not volume-based.
I moved the graph (red) down 25 points; this version shows positive values in "trend mode" (>25), and negative values in "range mode" (<25). The line sits at 0. The underlying code for the ADX is basically identical to the official PulseWire built-in version.
Now the exciting part: DI+ and DI- are used to calculate the ADX. They are sometimes included in the ADX indicator chart, I included a version that shows them in the graphic, at the bottom. Traditionally, DI+ (green) crossing DI- (dark red) from below shows the beginning of an upward trend, and therefore a good LONG entry position. However, I noticed that this is usually not the case: this method responds very slowly to the actual price movement. At the point the indicator tells you to enter, the trend is usually already exhausted.
I found a better way to use this data; instead of waiting for both graphs to cross, meaning the difference in their respective values is 0, we look for the greatest possible difference. That is what the purple graph of my indicator shows (ΔDI±). It utilizes the zero-line we already created for the ADX. High positive values declare that the DI+ is much greater than the DI-, and vice versa. Delta is the greek letter used in mathematics for difference, so that is what I call this indicator.
How to use it:
When you look at the graph, low Delta values seem to be good entry points for LONG positions, high Delta values good exits. This is similar to how RSI and CCI work, which is why included them in the chart above (). However, this is only reliable, when the ADX is above 25, or 0 in this version, indicating the symbol is in "trend mode". This is important .
When you look at the examples in the chart, you can confirm that. The marked candles show good entry and exit points, with Delta being notably low/high (±25 seems to be a good threshold, the dashed lines sit at +30/-30), and the ADX above 0 (25). Now, you might have noticed that around mid-december the Delta actually registers the highest value for this symbol in the given time frame, indicating a strong SHORT after a steep climb. But, importantly , the ADX is not in "trend mode" as required for a clear signal, it is in "range mode": the price discovers this new level and takes a few days to get used to it. It does not fall. This shows why only the combination of both Delta and ADX gives desirable results.
I noticed that this seems to work best for 1D and 1H candles; if you find any other time frames or scenarios, let me know!
PLEASE NOTE THAT THIS IS BASED ON PERSONAL, EMPIRICAL OBSERVATIONS. PAST RESULTS DO NOT GUARANTEE SUCCESS IN THE FUTURE. DO NOT TAKE THIS AS INVESTMENT ADVICE!
Thanks to PulseWire and robertkowalski for providing the basis on which the code is built. Credit goes to the appropriate developers/owners.
()
Let me know if you make any other observations, or find other ways to use the data! Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
