VWAP Anker: Time, ATH/ATL, Swings, Pivots & Dynamic AlertsVWAP Ultimate: Time, ATH/ATL & Bear-Market Swings
VWAP Ultimate combines multiple important VWAP anchors into a single indicator, helping traders identify institutional price levels, long-term market structure, and key support and resistance zones.
Instead of relying on a single traditional VWAP, this indicator provides several anchoring methods that offer different perspectives on market behavior.
Included VWAP Types
📅 Time-Based VWAPs
Daily VWAP
Weekly VWAP
Monthly VWAP
These VWAPs automatically reset at the beginning of each new period and are especially useful for:
Intraday trading
Swing trading
Trend identification
Dynamic support and resistance levels
🚀 All-Time High VWAP (ATH VWAP)
This VWAP is anchored from the asset's historical all-time high.
Use cases:
Evaluating market strength after major bullish moves
Identifying long-term resistance and support zones
Estimating institutional cost basis above historical highs
📉 All-Time Low VWAP (ATL VWAP)
This VWAP is anchored from the asset's historical all-time low.
Use cases:
Analyzing long-term accumulation phases
Identifying major support areas
Evaluating long-term market cycles
🐻 Bear Market Swing VWAPs
The indicator detects significant swing highs and swing lows using a 20/20 pivot structure.
Calculated levels:
VWAP anchored to the most recent significant swing high
VWAP anchored to the most recent significant swing low
These levels are particularly useful during:
Bear markets
Market corrections
Trend reversals
Identification of institutional entry and exit zones
Customization
Each VWAP category can be enabled or disabled independently:
✅ Time-Based VWAPs (D/W/M)
✅ ATH / ATL VWAPs
✅ Bear Market Swing VWAPs
This allows traders to tailor the chart to their specific trading style and analysis needs.
Markets & Use Cases
This indicator can be applied to:
Stocks
Cryptocurrencies
Indices
Futures
Forex
It is especially valuable for traders and investors who analyze multiple time horizons and want to combine key market anchors into a single tool.
Core Concept
VWAP levels are widely used by institutional market participants as a benchmark for fair value. By combining time-based, historical, and structural anchor points, this indicator provides a broader view of market structure than a standard VWAP alone.
A comprehensive tool for analyzing trend direction, market structure, and long-term support and resistance levels within a single indicator. Indicator
Indicator
ATH/ATL Tracker [LuxAlgo]The ATH/ATL Tracker effectively displays changes made between new All-Time Highs (ATH)/All-Time Lows (ATL) and their previous respective values, over the entire history of available data.
The indicator shows a histogram of the change between a new ATH/ATL and its respective preceding ATH/ATL. A tooltip showing the price made during a new ATH/ATL alongside its date is included.
🔶 USAGE
By tracking the change between new ATHs/ATLs and older ATHs/ATLs, traders can gain insight into market sentiment, breadth, and rotation.
If many stocks are consistently setting new ATHs and the number of new ATHs is increasing relative to old ATHs, it could indicate broad market participation in a rally. If only a few stocks are reaching new ATHs or the number is declining, it might signal that the market's upward momentum is decreasing.
A significant increase in new ATHs suggests optimism and willingness among investors to buy at higher prices, which could be considered a positive sentiment. On the other hand, a decrease or lack of new ATHs might indicate caution or pessimism.
By observing the sectors where stocks are consistently setting new ATHs, users can identify which sectors are leading the market. Sectors with few or no new ATHs may be losing momentum and could be identified as lagging behind the overall market sentiment.
🔶 DETAILS
The indicator's main display is a histogram-style readout that displays the change in price from older ATH/ATLs to Newer/Current ATH/ATLs. This change is determined by the distance that the current values have overtaken the previous values, resulting in the displayed data.
The largest changes in ATH/ATLs from the ticker's history will appear as the largest bars in the display.
The most recent bars (depending on the selected display setting) will always represent the current ATH or ATL values.
When determining ATH & ATL values, it is important to filter out insignificant highs and lows that may happen constantly when exploring higher and lower prices. To combat this, the indicator looks to a higher timeframe than your chart's timeframe in order to determine these more significant ATHs & ATLs.
For Example: If a user was on a 1-minute chart and 5 highs-new highs occur across 5 adjacent bars, this has the potential to show up as 5 new ATHs. When looking at a higher timeframe, 5 minutes, only the highest of the 5 bars will indicate a new ATH. To assist with this, the indicator will display warnings in the dashboard when a suboptimal timeframe is selected as input.
🔹 Dashboard
The dashboard displays averages from the ATH/ATL data to aid in the anticipation and expectations for new ATH/ATLs.
The average duration is an average of the time between each new ATH/ATL, in this indicator it is calculated in "Days" to provide a more comprehensive understanding.
The average change is the average of all change data displayed in the histogram.
🔶 SETTINGS
Duration: The designated higher timeframe to use for filtering out insignificant ATHs & ATLs.
Order: The display order for the ATH/ATL Bars, Options are to display in chronological (oldest to newest) or reverse chronological order (newest to oldest).
Bar Width: Sets the width for each ATH/ATL bar.
Bar Spacing: Sets the # of empty bars in between each ATH/ATL bar.
Dashboard Settings: Parameters for the dashboard's size and location on the chart.
Indicator
[ChasinAlts] All-Timers [MO]*** PLEASE NOTE: THIS SCRIPT WILL MAKE TV's SERVERS FLEX IT'S MUSCLES SO IT WILL SLOW DOWN OTHER PROCESSES WITHIN TV (HIDE THEM IF NECESSARY TO REGAIN THE SPEED/FUNCTION...OR DELETE THEM...WHAT DO I CARE???) ESP IF YOU HAVE 3-4 ITERATIONS AS I DO TO SHOW THE WHOLE KUCOIN MARGIN MARKET ***
G'day Tradeurs, Hope everyone is having a FAN-FRIGGIN-TASTIC DAY!!! Right now (November 2nd, 2022) is a GREAT time to look for coins that are near their ALL-Time Low
due to the incoming bull market rearing its head around the corner (I'd wait for ONE MORE big dump to be safe though). And how GREAT would it be to even have
$50 of a coin with 10X leverage (I wouldn't suggest this to others though) at the near bottom said market? That is the reason for me publishing this.
This is a quick little scanner script thats part of my "Market Overview" series. Nothing monumental or advanced regarding the ATH/ATL calculations.
Perhaps one thing slightly different here than others is both the % from ATH and % from ATL is calculated and the result is the % that the price is between it's ATH/ATL.
So, it will show the All Time High/All Time Low BUT ONLY to the extent that the TF will allow. Ie. For the Free Planned Users, they can only get data as far back as
5,000 bars would provide. Thus, the ATH/ATL will not show the ACTUAL ATH/ATL but the highest high/lowest low within the last 5,000 bars. So if you want to get more
granular then I suggest you going with a Lower TF but if you want to see the ACTUAL ATH/ATL then the Daily TF or higher is what you're looking for. Make sure to note
that when a coin's plot is staying even with the 0 or 100 line(0 being the ATL within the TF and vise versa) that means the coin is pushing the ATH/ATL further than it
previously was, Also, as with many of my other scripts, I've included a coin filter that will either allow or disallow the plot to be printed depending on if the
"Printed Bar Count" is selected and if it's % is above the threshold (set by the user). This filter will pretty much be useless on the higher TF so don't expect a change
in the data output if you're using a HTF and have that filter selected for use. Elaboration on the inner-workings of MOST inputs can be found in the tooltips provided
along side it and viewed within the settings menu by hovering your curser over the little circled "i" next to the appropriate setting (or near it if the tooltips are
referencing each other or other inputs around itself). May the force be with your trades (in my best Darth Vader voice). Toodles. -ChasinAlts Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
