ABCD Pattern Finder**Detailed Indicator Description**
Your indicator is an **ABCD Pattern Finder** for PulseWire. It scans price action for swing-based **AB=CD harmonic-style patterns**, confirms whether the pattern meets your rules, then plots the pattern and related trade levels directly on the chart.
**Core Purpose**
The indicator is designed to find situations where price makes:
**A to B:** an initial impulse move.
**B to C:** a retracement or pullback.
**C to D:** a second move that is approximately equal to the A-to-B move.
When the C-to-D leg completes and passes the filter rules, the indicator treats point **D** as the trade-confirmation area. It then displays an entry reference, stop loss, and three take-profit levels.
**Bullish and Bearish Logic**
A **bullish setup** is one where the completed pattern suggests a potential long trade after point D.
A **bearish setup** is one where the completed pattern suggests a potential short trade after point D.
The indicator uses the sequence of highs and lows to decide whether the pattern is bullish or bearish. It does not simply mark every four-point swing; the swing sequence must form a valid ABCD structure.
**Zigzag Inputs**
**Pivot Bars Left** controls how many bars to the left must be considered when confirming a swing high or swing low.
**Pivot Bars Right** controls how many bars to the right must pass before a pivot is confirmed.
Higher values make the indicator less sensitive and produce fewer patterns. Lower values make it more sensitive and produce more patterns, but with more noise.
**Pattern Quality Inputs**
**Min CD/AB Time Ratio** sets the minimum amount of time the CD leg must take compared with the AB leg. This prevents CD from forming too quickly.
**Max CD/AB Time Ratio** sets the maximum amount of time CD can take compared with AB. This prevents slow, dragged-out CD legs from qualifying.
**AB=CD Equality Tolerance** controls how close the CD leg must be to the AB leg in price size. A value of **0.10** means CD can be within plus or minus 10% of AB.
**Min BC Retracement of AB** sets the shallowest acceptable pullback from B to C.
**Max BC Retracement of AB** sets the deepest acceptable pullback from B to C.
**Min AB Size ATR Multiple** requires the AB leg to be large enough compared with ATR. This helps filter out small, low-quality patterns.
**ATR Length** controls the ATR calculation used for volatility-based filtering and stop placement.
**Disallow Pattern Overlap** prevents a new pattern from being confirmed inside the range of an already confirmed pattern.
**Trade Inputs**
**Stop ATR Buffer Beyond D** places the stop loss beyond point D by a volatility-based buffer. A larger value gives the trade more room, while a smaller value creates a tighter stop.
**TP1 Fibonacci Level** sets the first profit target based on the A-to-D range.
**TP2 Fibonacci Level** sets the second profit target.
**TP3 Fibonacci Level** sets the third profit target.
The default target structure is TP1 at **0.618**, TP2 at **1.0**, and TP3 at **1.382** of the A-to-D range.
**Display Inputs**
**Trade Display Bars Forward** controls how far the entry, stop, and target lines extend to the right of the current candle.
**Show Trade Levels** turns entry, stop loss, and target lines on or off.
**Show ABCD Lines** turns the A-B, B-C, and C-D pattern lines on or off.
**Show ABCD Labels** turns the A, B, C, and D labels on or off.
You can also customize colors for the confirmed pattern, entry line, stop line, and target lines.
**Historical Pattern Inputs**
**Show Historical AB=CD Patterns** controls whether older confirmed patterns remain visible.
**Historical Closed Lookback** controls how many recently closed patterns are included in the historical visual/stat window.
**Closed Trade Lookback** lets you visually rewind and highlight a previous closed trade. A value of **0** shows the most recent trade. A value of **1** shows the trade before that.
**Closed Trade Lookback Color** controls the color used when reviewing an older closed trade.
**Confirmation Triangles**
The indicator can plot a triangle when a pattern is confirmed.
A bullish confirmation uses the bullish triangle color.
A bearish confirmation uses the bearish triangle color.
You can turn these triangles on or off and choose their size: **Tiny, Small, Normal, or Large**.
**AD Line Inputs**
The indicator can draw a line from point **A** to point **D**, extended to the right.
You can control whether this line appears, plus its color, width, and style: **Solid, Dashed, or Dotted**.
**Stats Window**
The stats window displays historical performance for TP1, TP2, and TP3.
For each target, it shows:
**Wins:** how many closed trades reached that target.
**Closed:** how many closed trades were evaluated.
**Rate:** the win rate for that target.
The stats are recalculated using your current trade input settings, so changing stop or target values updates the displayed historical results.
**Alerts**
The indicator includes two alerts:
**New ABCD Pattern Detected** triggers when a valid pattern is found.
**ABCD Pattern Entry at D** triggers when the pattern confirmation/entry condition occurs at point D.
Indicator
ABCD Harmonic Projection [WillyAlgoTrader]📐 ABCD Harmonic Projection is an overlay indicator that automatically detects ABCD harmonic patterns from ZigZag pivots, validates them against Fibonacci ratio constraints (BC/AB retracement + CD/AB extension), scores each pattern with a 4-factor quality engine (0–100), projects the D-point completion zone, and draws Target and Stop zones with Fibonacci extension and retracement levels — with full TP/SL outcome tracking and separate bull/bear win rate statistics.
The ABCD pattern is one of the foundational harmonic structures: four alternating swing points (A→B→C→D) where the BC leg retraces a Fibonacci portion of the AB leg, and the CD leg extends from C toward a projected D-point that is a Fibonacci ratio of the AB leg. When price reaches the D-point, the pattern completes — and a reversal or continuation move is expected. This indicator automates the entire detection-to-target workflow: find the swings, measure the ratios, validate the geometry, project the target, and track the outcome.
🧩 WHY THESE COMPONENTS WORK TOGETHER
Manually identifying ABCD patterns requires eyeballing four pivot points, measuring two Fibonacci ratios, estimating the D-point projection, and drawing the target zone — across multiple instruments and timeframes. Most traders miss patterns or miscalculate ratios.
This indicator chains each step into an automated pipeline:
ZigZag pivot detection → 4-point ABCD extraction → BC/AB ratio validation → CD/AB extension calculation → D-point projection → 4-factor quality scoring → Target Zone + Stop Zone placement → Fibonacci extension/retracement overlay → TP/SL outcome tracking → Win rate statistics
The ZigZag engine ensures only confirmed alternating swings are used (no noise pivots). The ratio validation filters patterns to only those within Fibonacci-valid ranges. The quality scoring ranks patterns by how close they are to ideal geometry. The D-point projection gives a specific price target — not a vague area. And the Target/Stop zones provide precise trade management levels anchored to the pattern's own geometry.
🔍 WHAT MAKES IT ORIGINAL
1️⃣ ZigZag pivot engine with direction management.
The indicator uses a directional ZigZag that enforces strict alternation: after a swing high, only a swing low is accepted (and vice versa). If price makes a higher high during an existing up-leg, the previous swing high is updated in place (not duplicated). This prevents the common problem of multiple consecutive highs being treated as separate pivots.
Pivots are detected using ta.pivothigh/ta.pivotlow with configurable lookback (default 8 bars). The ZigZag stores prices, bar indices, and directions in parallel arrays — providing the last 200 pivots for pattern scanning.
2️⃣ Fibonacci-validated ABCD pattern detection.
When a new pivot is confirmed and at least 4 pivots exist, the indicator extracts the most recent A, B, C points and validates:
— BC/AB retracement ratio : must be between minBcAbRatio (default 0.382) and maxBcAbRatio (default 0.886). Classic ABCD ratios are 0.382, 0.500, 0.618, 0.786, and 0.886. Patterns outside this range are rejected.
— ATR minimum swing filter : the AB leg must be at least 1× ATR in size — filtering out noise patterns during low-volatility bars.
— Minimum leg depth : AB must span at least 3 bars — ensuring the pattern has temporal structure, not just a single spike.
Pattern direction: if B > A → bullish ABCD (D projected above C). If B < A → bearish ABCD (D projected below C).
The D-point is projected from C using the average of the configurable CD/AB ratio range: projectedD = C + direction × |AB| × avgCdAbRatio.
3️⃣ 4-factor pattern quality scoring (0–100).
Each detected pattern receives a quality score from four dimensions:
— 📐 Fibonacci precision (45 pts) : how close BC/AB is to the nearest standard Fibonacci level (0.382, 0.500, 0.618, 0.786, 0.886, 1.000, 1.272, 1.618). Exact Fib ratio = full points. 0.05 away = partial. 0.18+ away = zero. This is the most heavily weighted factor because Fibonacci alignment is the core of harmonic pattern validity.
— ⏱️ Time symmetry (25 pts) : the ratio of estimated CD bars to AB bars. Perfect symmetry (CD bars = AB bars) = 25 points. Asymmetric patterns (one leg much longer) score lower.
— ⚖️ Price symmetry (20 pts) : BC retracement depth relative to 0.618 — deeper retests (closer to 0.618) score higher. Very shallow pullbacks (e.g., 0.236) receive fewer points.
— 📏 Leg maturity (10 pts) : AB leg length in bars — patterns with 8+ bars get full points, 5+ get 7, 3+ get 3. Single-bar spikes score zero.
Patterns below the Min Pattern Score threshold (default 40) are not displayed.
4️⃣ Fibonacci extension levels projected from C.
Four AB extension levels are drawn from point C in the direction of the pattern:
— 0.786 × |AB| — shallow completion
— 1.000 × |AB| — classic equal-leg ABCD
— 1.272 × |AB| — extended completion
— 1.618 × |AB| — maximum extension
The 1.0 level is drawn thicker (2px, less transparency) as it represents the ideal equal-leg completion. Each level includes a price label. Additionally, the measured BC/AB retracement ratio is displayed at the midpoint of the BC leg for reference.
5️⃣ Fibonacci retracement levels within C→D (partial TP targets).
For active patterns, three retracement levels are drawn between C and the projected D:
— 0.382 of CD range — first partial profit target
— 0.500 of CD range — mid-target
— 0.618 of CD range — aggressive partial take
These provide natural exit levels before the full D-point is reached — useful for scaling out of positions progressively.
6️⃣ Target Zone + Stop Zone with geometric sizing.
On each pattern:
— TARGET ZONE : a band around the projected D-point, sized at 10% of the CD range. For bullish patterns: the zone sits just below D. For bearish: just above D. This is where the pattern completion trade expects to reach profit.
— STOP ZONE : a band around point C, also sized at 10% of CD range. For bullish patterns: below C. For bearish: above C. If price returns past C, the pattern structure is broken.
Both zones extend rightward until price touches the target zone (tracked by touch bar), or the pattern resolves (TP/SL hit). Zones use distinct colors: green for target, red for stop.
7️⃣ TP/SL outcome tracking with separate bull/bear statistics.
Each active pattern monitors:
— TP hit : price reaches the projected D-point (high ≥ D for bull, low ≤ D for bear)
— SL hit : price returns past C against the pattern direction (low ≤ C for bull, high ≥ C for bear)
— Simultaneous TP+SL on the same bar → resolved as loss (conservative)
On TP hit: R:R is calculated as |entry to TP| / |entry to SL| and accumulated. The dashboard shows separate bull and bear win rates with average R:R on wins.
8️⃣ Active-only display mode.
When "Show Active Only" is enabled (default), completed patterns (TP or SL already hit) are hidden — only the current live pattern remains on the chart. When disabled, up to maxPatterns historical patterns are shown for context. This prevents chart clutter while maintaining full statistical tracking.
9️⃣ One-active-pattern constraint.
The indicator only allows one active pattern at a time. When an active pattern exists (status = 0), no new patterns are detected. This prevents overlapping projections and conflicting zones. A new pattern can only be detected after the current one resolves (TP or SL).
⚙️ HOW IT WORKS — CALCULATION FLOW
Step 1 — ZigZag: Directional pivot detection with alternation enforcement. Higher highs update existing swing (no duplicate). Lower lows same. Pivots stored in parallel arrays.
Step 2 — Pattern extraction: On each new confirmed pivot: extract A (3rd-to-last), B (2nd-to-last), C (latest). Compute AB length, BC length, BC/AB ratio.
Step 3 — Validation: BC/AB within Fibonacci range? AB ≥ ATR? AB ≥ 3 bars? No active pattern already?
Step 4 — Scoring: 4 factors: Fibonacci precision (45), time symmetry (25), price symmetry (20), leg maturity (10). Score ≥ minScore → pattern accepted.
Step 5 — Projection: D = C + direction × |AB| × avgCdAbRatio. Bars capped at maxBarsProjection.
Step 6 — Drawing: On barstate.islast: delete-and-redraw all visible patterns. AB and BC legs as solid lines. CD projection as dotted. A/B/C/D labels. Score label. Target/Stop zones as boxes. Fib extension and retracement levels as dashed lines with price labels.
Step 7 — Evaluation: Each bar: check all active patterns for TP/SL hits. Update status, accumulate win/loss stats, record R:R.
📖 HOW TO USE
🎯 Quick start:
1. Add the indicator — ABCD patterns appear automatically as colored leg lines with A/B/C/D labels
2. Yellow dotted line from C = projected path to D
3. Green "TARGET ZONE" box = where price should reach (take profit)
4. Red "STOP ZONE" box = where the pattern is invalidated (stop loss)
5. Blue dashed lines = Fibonacci extension levels (0.786, 1.0, 1.272, 1.618)
6. Blue dotted lines = partial TP targets (0.382, 0.5, 0.618 of CD)
7. "Long"/"Short" label = confirmed entry signal
👁️ Reading the chart:
— 🟢 Green legs + labels = bullish ABCD (D above C, expecting up-move)
— 🔴 Red legs + labels = bearish ABCD (D below C, expecting down-move)
— 🟡 Dotted projection line = expected path C → D
— 🟢 "TARGET ZONE" box = profit target area around projected D
— 🔴 "STOP ZONE" box = invalidation area around C
— 🔵 Dashed lines = Fib extension levels from C (0.786/1.0/1.272/1.618 of AB)
— 🔵 Dotted lines = CD retracement levels (partial TPs: 0.382/0.5/0.618)
— Score label (e.g., "72%") = pattern quality
📊 Dashboard fields:
— Patterns: active / total count
— Last Signal: direction + status (Active/TP ✓/SL ✗) + score
— Bull W/L: wins/losses and win rate for bullish patterns
— Bear W/L: wins/losses and win rate for bearish patterns
— Avg R:R: average reward-to-risk on winning bull/bear trades
— ATR: current value for reference
— Timeframe, version
🔧 Tuning guide:
— Too many patterns: increase ZigZag Length (12–21), increase Min Score (60+), enable ATR filter
— Too few patterns: decrease ZigZag Length (5–8), decrease Min Score (30), widen BC/AB ratio range
— Patterns too small: increase ATR filter or ZigZag Length
— Want only perfect geometry: narrow BC/AB to 0.500–0.786, set CD/AB to 0.9–1.1, Min Score 70+
— Extended patterns: set Max CD/AB to 1.618 or higher
⚙️ KEY SETTINGS REFERENCE
⚙️ Main:
— ZigZag Length (default 8): pivot detection lookback
— Pivot Sources : configurable high/low sources
📐 Pattern:
— Min/Max BC/AB Ratio (default 0.382/0.886): Fibonacci retracement range
— Min/Max CD/AB Ratio (default 0.786/1.618): extension range for D projection
— Min Pattern Score (default 40): quality threshold
— ATR Filter (default On): minimum swing size
— Max Patterns (default 3): display limit
— Active Only (default On): hide completed patterns
🎨 Visual:
— Buy/Sell signals, D projection, Fib levels, TP/SL zones, A/B/C/D labels, score (all toggleable)
— Auto / Dark / Light theme
🔧 Advanced:
— Max Bars for D Projection (default 200): limits distant projections
🔔 Alerts
— 🟢 LONG ABCD / 🔴 SHORT ABCD — entry, TP, SL, score, pattern type
All support plain text and JSON webhook format. Bar-close confirmed.
⚠️ IMPORTANT NOTES
— 🚫 No repainting. All signals require barstate.isconfirmed and newPivot (confirmed ZigZag pivot). Patterns are detected after the pivot bar closes. Drawings are rendered on barstate.islast using delete-and-redraw — previous bar's pattern state is final.
— 📐 The ZigZag enforces strict alternation : high → low → high → low. If price makes a higher high during an existing up-swing, the previous high is updated in place — no duplicate pivots are created. This is essential for correct A/B/C/D extraction.
— ⚖️ Only one active pattern is allowed at a time. New patterns are blocked until the current one resolves (TP or SL). This prevents conflicting signals and overlapping zones.
— 📊 The quality score is heavily weighted toward Fibonacci precision (45 out of 100 points). A pattern with BC/AB exactly at 0.618 scores much higher than one at 0.450. This reflects the harmonic principle that Fibonacci alignment is the primary measure of pattern validity.
— 🔒 Simultaneous TP+SL on the same bar is resolved as a loss (conservative) . This prevents ambiguous outcomes from inflating win rates.
— 📏 The D-point projection uses the average of the min/max CD/AB ratio range — not the exact 1.0 (equal legs). With default settings (0.786–1.618), the projected D is at 1.202× AB from C — between classic and extended. Adjust the CD/AB range to target specific completion types.
— 🛠️ This is a harmonic pattern detection and projection tool , not an automated trading bot. It identifies ABCD geometry, projects D-point targets, and provides structured trade zones — trade decisions remain yours.
— 🌐 Works on all markets and timeframes. Indicator
ABCD Harmonic Pattern Strategy (Bull + Bear) This script is a strategy implementation of the classic ABCD Harmonic Pattern, designed for market structure analysis, backtesting, and educational research.
The ABCD pattern is one of the foundational harmonic price patterns in technical analysis. Its Fibonacci ratio relationships were formalized and standardized within harmonic trading theory by Scott M. Carney, whose work helped define modern harmonic pattern rules.
This strategy is conceptually inspired by educational ABCD pattern logic shared by the PulseWire author theEccentricTrader.
The code, structure, execution logic, filters, and risk management have been independently developed, reconstructed, and extended into a complete PulseWire strategy.
What this strategy does
Detects bullish and bearish ABCD harmonic patterns based on price structure and Fibonacci ratios.
Reconstructs ABCD market structure logic for both directions instead of using a simple visual inversion.
Draws the ABCD legs, structure labels (A, B, C, D), and projection levels directly on the chart.
Generates long and short trade entries using confirmed ABCD structures.
Includes optional confluence filters, such as:
Higher-timeframe EMA trend filter
RSI strength filter
ATR volatility filter
Volume confirmation
Candle body confirmation
Minimum bounce distance from point D
Provides built-in risk management, including:
Configurable Stop Loss
Configurable Take Profit
Optional trailing stop
Designed for backtesting, parameter optimization, and analytical research.
Why this strategy is different
This script is not a simple indicator conversion nor a basic bullish/bearish mirror.
The ABCD pattern logic has been recreated at the structural level to better reflect how bullish and bearish market formations behave in real price action.
Key differences
Reconstructed bullish and bearish structures
Bullish and bearish ABCD patterns are independently defined using market structure logic, not just inverted visually.
Each direction has its own pivot relationships and validation rules to produce a more faithful representation of the ABCD pattern.
Structure-aware pattern validation
Pattern confirmation is based on price swings, structure continuity, and Fibonacci alignment, helping reduce distorted or forced patterns.
Strategy-based execution
Unlike indicator-only ABCD tools that only visualize patterns, this script uses strategy.entry and strategy.exit, enabling full backtesting and performance analysis.
Confluence-driven entries
Trade entries can require multiple confirmation layers beyond the pattern itself, helping reduce low-quality signals and overtrading.
Integrated risk management
Stop Loss, Take Profit, and optional trailing logic are applied consistently for both long and short positions.
Non-repainting design
Pattern detection and entries rely on confirmed bars (barstate.isconfirmed) and higher-timeframe data with lookahead_off, ensuring signals do not repaint historically.
Improved and controlled visualization
Pattern drawings, projections, and entry markers are managed with strict object limits to comply with PulseWire performance and publishing requirements.
How to use
Add the strategy to a chart and select a symbol and timeframe.
Enable or disable filters under “Entry Filters (Confluence)”.
Configure Stop Loss, Take Profit, and trailing behavior under “TP/SL”.
Use pattern drawings and entry markers as visual and analytical confirmation, not as standalone trade signals.
Important notes
This script is provided for educational and research purposes only.
It does not provide financial or investment advice.
No profitability or performance is implied or guaranteed.
Past performance does not indicate future results.
Always test across multiple markets and timeframes and apply proper risk management.
Credits
ABCD Harmonic Pattern: Harmonic trading principles as formalized by Scott M. Carney.
Conceptual inspiration: Educational ABCD pattern logic shared by @theEccentricTrader on PulseWire.
Pattern reconstruction, strategy logic, and risk management: Independent development. Strategy
N-Pattern Detector (Advanced Logic)Introduction
The N-Pattern Detector (Advanced Logic) is a powerful Pine Script-based tool designed to identify a specific price structure known as the "N-pattern", which often indicates trend continuation or potential breakout points in the market. This pattern combines zigzag pivot logic, retracement filters, volume confirmation, and trend alignment, offering high-probability trading signals.
It is ideal for traders who want to automate pattern detection while applying smart filters to reduce false signals in various markets — including stocks, forex, crypto, and indices.
What is the N-Pattern?
The N-pattern is a 3-leg price formation consisting of points A-B-C-D. It typically follows this structure:
Bullish N-Pattern:
A → Low Pivot
B → Higher High (Impulse)
C → Higher Low (Retracement)
D → Breakout above B (Confirmation)
Bearish N-Pattern:
A → High Pivot
B → Lower Low (Impulse)
C → Lower High (Retracement)
D → Breakdown below B (Confirmation)
The pattern essentially reflects a trend–pullback–breakout structure, making it suitable for continuation trades.
Key Features
1. Intelligent ZigZag Pivot Detection
Uses pivot highs/lows to define key swing points (A, B, C).
Adjustable ZigZag depth to control pattern sensitivity.
Filters noise and avoids false signals in volatile markets.
2. Retracement Validation
Validates the B→C leg as a proper pullback using Fibonacci-based thresholds.
User-defined min and max retracement settings (e.g., 38.2% to 78.6% of A→B leg).
3. Trend Filter via EMA
Filters patterns based on trend direction using a customizable EMA (e.g., 200 EMA).
Only detects bullish patterns above EMA and bearish patterns below EMA (optional).
4. Volume Confirmation
Ensures that impulse legs (A→B, C→D) are supported by stronger volume than the correction leg (B→C).
Adds another layer of confirmation and reliability to detected patterns.
5. Target Projections
Automatically draws 100% A→B projected target from point C.
Optional Fibonacci extensions at 1.272 and 1.618 levels for take-profit planning.
Visually plotted on the chart with colored dashed/dotted lines.
6. Clear Visuals & Labels
Connects all pattern points with colored lines.
Clearly labels points A, B, C, D on the chart.
Uses customizable colors for bullish and bearish patterns.
Includes real-time alerts when a valid pattern is detected.
How to Use It
Add to Chart
Apply the indicator to any chart and time frame. It works across all asset classes.
Adjust Inputs (Optional)
Set ZigZag Depth to control pivot detection sensitivity.
Define Min/Max Retracement levels to match your trading style.
Enable or disable Trend and Volume filters for cleaner signals.
Customize EMA length (default: 200) for trend validation.
Wait for Pattern Confirmation
The indicator constantly scans for valid N-patterns.
A pattern is confirmed only after point D forms (breakout or breakdown).
You’ll see the full pattern drawn with target levels.
Set Alerts
Alerts trigger automatically on confirmation of a bullish or bearish pattern.
You can customize these in PulseWire’s alerts panel. Indicator
ABCD Projection [Trendoscope®]Over the years, we have extensively explored and published numerous scripts centered around various chart patterns, including Harmonic Patterns, Reversal Patterns, Elliott Waves, and more. Our expertise in these areas has led to frequent requests for an indicator based on the ABCD pattern. Although we didn't include it as part of our Harmonic Patterns collection, the development of a dedicated ABCD Projection Indicator has always been a priority for us.
🎲 Overview of the ABCD Projection Indicator
The ABCD Projection Indicator is designed to identify and project ABCD patterns using a Zigzag-based approach. This pattern, characterized by alternating pivot highs and lows labeled as A, B, C, and D, is particularly significant in trending markets where it signifies trend continuation following deep pullbacks.
The indicator works by confirming the ABC pivots and projecting the D pivot based on the established price swings. Since ABCD patterns are most effective in trending environments, the indicator focuses on filtering patterns where the retracement from the C pivot has not compromised the trade's potential. Specifically, it ensures that the starting point (S)—where the pattern is detected—has not retraced beyond a defined threshold, preserving the opportunity to execute a trade with the goal of reaching the projected D pivot.
Additionally, the ABCD Projection Indicator considers the retracement ratio from the C pivot, which plays a crucial role in risk management. A higher retracement ratio reduces the stop distance (from pivot A to the entry point S) while increasing the distance to the target (pivot D), thereby enhancing the reward/risk ratio for trades.
🎲 Components of the ABCD Projection Indicator
The ABCD Projection Indicator comprises several key components:
A, B, C Pivots and Zigzag Wave : These elements form the foundational structure of the ABCD pattern.
S Point : This is the location where the pattern is identified, positioned a few bars away from the confirmed C pivot.
Estimated D Pivot : The D pivot is projected based on the A, B, and C price levels. The time or distance to the D pivot is influenced by the starting point S.
Mini Stats Table : Located in the top right corner, this table displays win/loss ratios and risk/reward data for both bullish and bearish scenarios.
Fibonacci Levels : Calculated from the C to D pivots, these levels are provided as a reference for additional analysis.
🎲 Indicator Settings
The settings for the ABCD Projection Indicator are minimal and intuitive, with tooltips provided to guide users through the configuration process.
Indicator
